2-3 day SUPER FAST
US priority shipping

RZR and Rhino complete HID conversion kit -$160

Rhino's-
Bulbs plug right into 06' housings
04 and 05 need 06 headlight housings to work
you can get then at your local Yamaha deal or
you can buy them from me for $40 -pair-
((07 will be released in the next day or so))
basic wire taps or butt connectors will be needed for install
wiring diagram can be provided
simple hand tools needed

RZR's-
EVERYTHING is PLUG an GO
NO cutting or WIRING
uses factory plugs without cutting
Zip ties or larger bolts maybe be needed
simple hand tools needed

(( DO NOT run during day time when temperatures are extreme))
(( start vehicle BEFORE starting HID system))
(( MAY need relay added ))

Do you take paypal?

YES SIR, or Credit Cards

Does it come with those mounting brackets I see in a couple of the pictures???

EVERYthing for mounting!
the only thing you will need is simple hand tools and wire taps or but connectors
to tap into your wire harness to get power for the ballast

"(( MAY need relay added ))"


why would you need to add a relay?

some guy told me that, a Rhino shop told him that the HID system will trip the fuse.... I personal think thats bull chit, but I dont want anyone coming at me all pissed off, tryin' to play it safe...

It will 100% trip the fuse in the rhino. I replaced mine with a 25amp and dont have any problems, just dont start your rhino with the headlights on, its a hard habit to break but you will get used to it. I would say a relay is overkill and a slight pain the ass to add, not worth it IMO.

Also, i have had false start up on the ballasts on some kits that i have done, yamaha seems to have a crap ground in the (-) wire that comes in the loom with the yellow and green wire. Sometimes you need to directly ground the ballast and not use the factory one.

I just did the conversion on my 07, Takin her out to Glamis for a night run this weekend,Sooo were is that fuse located ??????

It is a small fuse box with a black cover. The stock fuse is a 15 amp but put a 25 amp one in it.
It is the small flat 2 prong type.

and
only tap the (+) into the harness
try to do a direct ground!
keep it short and sweet to each ballast!

this will help alot

under the battery cover, there is a fuse block. Read the abbreviations and it will tell you which one it is. I think its the only 15 amp one in there...forget, its been a while since i did mine. They take the small fuses too.

((( Attention everyone ))))
a 12v relay will be needed
you might get lucky without one, but Im told
that the Rhino will trip the 25amp fuse too!

is the reason for the relay to reduce arcing that causes the fuse to trip, hence removing the fuse pop?

p.s. I got my kit last night and should have it installed in my '07 as soon as my '06 housings arrive... THANKS FOR THE SPEEDY SHIPPING!!!

My kit already has the relay hasn'tt popped yet..Tested it last night ..I like it..

anytime,
I'll send you some of my ballast labels as soon as I get some more in,
any questions, call me anytime
kyle-

Hey Kyle? Pipelayer and I want to know if you are going to do any for the Arctic Cat Prowler.

We just ordered your 10,000K Rhino conversion HID's.
I look forward to installing them in my 06 Rhino SE.
Just a question, what wattage are the 10,000K bulbs?

I just got my RZR kit.

Where does the big grommet go?

At the top of the installation there is a diagram drawn in,
it shows high beam and low beam connectors. The RZR only has one beam?

Also, No hardware in package.

Can you post some better pics showing each component installed and wired?

35w

cut the grommet apart and separate the 2
bulb and power harness
don't pay attention to the instructions
if you have questions, call me and I will walk you threw it

My hid conversion works great with a 20 amp fuse, IF the battery is fully charged. If I run my stereo for an hour or so (no amp just a head unit XM, and four 6-1/2's) it will blow the 20 amp also! I use a battery tender on my Rhino and just keep the battery topped off. It must be something with the stock wiring because I also have hid's on the bumper that will work fine even with a so-so charge on the battery.

if you have plug n play for the rzr...what about the ranger?

PM me.......

Well, we received our 06 Rhino kit, fast shipping by the way.
The HID bulbs in the kit had the same three prong shape as
the stock 06 bulbs, but were about 25 % smaller, there was
no way they would have stayed in the housings.

I had to silicone them in place, not what I wanted to do, but
I know of other people who have done it and it seems to
work out OK. I did have to replace the fuse with a 25 amp
and I will try to remember not to start the engine with the
lights on.

I like the ballast brackets and the overall quality of the kit,
just wanted to point out the size difference of the HID bulb
plastic base as compared to the stock bulb base.

Light wise how do you like them? Is it a ton more light than the stockers? I have 2 VisionX HID's on the front bumper and I'm thinking about doing this set up as well for a little more upclose lighting or when I don't want to run my big HID's.

Oh....post some pics of the lights at night if you don't mind. I'd really like to see a side by side comparison of stockers and this set up.

I'll take some pictures tonight, I want to do some adjusting anyway.

you have to run the white plastic spacer with the the rubber grommet for them to fit tight.
some before and after shots too

Here is a shot at about 50 feet away.

Here is another shot, but with two Trailtech hids on the bumper also.

do you have this kit for a 07 ranger 700xp?

yes I do
Email or Call me and we can get you set up

ok, I just wanted to let everyone know that I am now shipping each order to my shop to set each kit up and put in my own instructions in to make things a little easyier on all of you....... so, it will take a little longer than 2 days

well, NOTHING is like a set of HIDs!
hahah, thanks for showing everyone this quote !!

do you have kit for 06 rangers?

Yes I do

THESE LIGHTS ARE AMAZING!!!!!

BEST UPGRADE BAR NONE... BAR NONE...

I didn't have a camera for pictures, but I was running through Pismo all Saturday night with only the 2 headlights converted and 4 (pointless) halogen lights and NEVER had an issue with anything at all related to the function, but most importantly the light was wide bright and crystal clear...

BUY THESE NOW... you will NOT regret it considering others are paying 2-3X for the same results...

please send pics when you can....
glad to hear your happy with them

Here are some more pics of the conversion on the RZR.
Click to view attachment
Click to view attachment
Click to view attachment
Click to view attachment

where's all the Rhino-heads at??