If there is any good coming out of this CARB stuff , it's that our out of state guys get tpo step right up to the plate
GEN 5
S4
934
ls2
Communications
New Beard TR1 seats
You know all the good stuff.. should be at pwdercoat by wednsday
Click to view attachment
Click to view attachment
Click to view attachment
Click to view attachment
Click to view attachment
Click to view attachment
Click to view attachment
Click to view attachment
Click to view attachment
Full Version: Frogisland
Looks good Grant. keep em' commin 
Congrats. Frogisland, can't wait to see it all done.
If you want to fit the car on the bottom of that nice trailer your building, you might need to cut the wheel wheels at an angle in the rear to allow the car to come in a little further. We couldn't fit mine in Rickredline's TPD without changing out the tires. The 14.50 x 17 Dunesports are quite a bit wider than the 15's. If the car is going on the lift, no problems. We had Ricks on top and mine below last rip out.
If you want to fit the car on the bottom of that nice trailer your building, you might need to cut the wheel wheels at an angle in the rear to allow the car to come in a little further. We couldn't fit mine in Rickredline's TPD without changing out the tires. The 14.50 x 17 Dunesports are quite a bit wider than the 15's. If the car is going on the lift, no problems. We had Ricks on top and mine below last rip out.
QUOTE(Bohica @ Oct 29 2007, 11:37 AM) 
Congrats. Frogisland, can't wait to see it all done.
If you want to fit the car on the bottom of that nice trailer your building, you might need to cut the wheel wheels at an angle in the rear to allow the car to come in a little further. We couldn't fit mine in Rickredline's TPD without changing out the tires. The 14.50 x 17 Dunesports are quite a bit wider than the 15's. If the car is going on the lift, no problems. We had Ricks on top and mine below last rip out.
If you want to fit the car on the bottom of that nice trailer your building, you might need to cut the wheel wheels at an angle in the rear to allow the car to come in a little further. We couldn't fit mine in Rickredline's TPD without changing out the tires. The 14.50 x 17 Dunesports are quite a bit wider than the 15's. If the car is going on the lift, no problems. We had Ricks on top and mine below last rip out.
I measured 6'11" from our square inner fenders to the ramp door. Don't have much room to angle those as they are +/-3" from the tires. I think we are narrower than the TPD. We have 97.5" wide inside. How much wider does the 17's make the car?
Is it too late to install a slide out on our stacker...
Froggy,
the new ride is looking good! Can't wait to see it!
the new ride is looking good! Can't wait to see it!
QUOTE(GRANT@FUNCO @ Nov 29 2007, 03:25 PM)
Grant, I'm sending you a new battery for your camera. Obviously it gave up on you after only one photo. Damn I hate that.
That way you can post all the photos you had planned on posting.
Awesome car. Hope to see it in person sometime.
Nice choice getter done!
QUOTE(Frogisland @ Nov 29 2007, 03:53 PM)
Grant, I'm sending you a new battery for your camera. Obviously it gave up on you after only one photo. Damn I hate that.
That way you can post all the photos you had planned on posting.
That way you can post all the photos you had planned on posting.
I can assure you the wait will be worth while
I have just under 150 gallons of fuel ran through mine thus far !!!
The car made it to assembly today . It will go fast now.
We are going to try something we have not done before , My assembly team will take pictures at the beginning and end of each day to show progress.
Assembly Day 1
Click to view attachment
Click to view attachment
We are going to try something we have not done before , My assembly team will take pictures at the beginning and end of each day to show progress.
Assembly Day 1
Click to view attachment
Click to view attachment
Looks good, keep 'um comin'
QUOTE(GRANT@FUNCO @ Dec 5 2007, 10:13 AM)
The car made it to assembly today . It will go fast now.
We are going to try something we have not done before , My assembly team will take pictures at the beginning and end of each day to show progress.
Assembly Day 1
Click to view attachment
Click to view attachment
We are going to try something we have not done before , My assembly team will take pictures at the beginning and end of each day to show progress.
Assembly Day 1
Click to view attachment
Click to view attachment
Grant...I think you need to get a shop manager in there if the top picture is the start of the day and the second one is at the end of the day. LOL
Parts showing up
The car we are taking to the AZ sandshow is done , we will be full time on yours
Click to view attachment
Click to view attachment
Click to view attachment
Click to view attachment
Click to view attachment
The car we are taking to the AZ sandshow is done , we will be full time on yours
Click to view attachment
Click to view attachment
Click to view attachment
Click to view attachment
Click to view attachment
hey frogisland you will have to let me know what you think about switching to a large car after owning a King Sand Car.
PS.... dig the color!!!!
PS.... dig the color!!!!
Grant, don't tease Frog. You know that is my Christmas present. 
Lookin' good! But I don't think it's going to cool very well with cardboard over the front of the radiator. 
Lookin' good! But I don't think it's going to cool very well with cardboard over the front of the radiator.
QUOTE(KingGlamis @ Dec 11 2007, 08:55 PM)
Grant, don't tease Frog. You know that is my Christmas present. Lookin' good! But I don't think it's going to cool very well with cardboard over the front of the radiator.
Lookin' good! But I don't think it's going to cool very well with cardboard over the front of the radiator. It's called a thermostat !
QUOTE(GRANT@FUNCO @ Dec 5 2007, 10:13 AM)
We are going to try something we have not done before , My assembly team will take pictures at the beginning and end of each day to show progress.
I would check the local pawn shops for your camera. Your assembly team jacked it.
QUOTE(Frogisland @ Dec 20 2007, 06:26 AM)
QUOTE(GRANT@FUNCO @ Dec 5 2007, 10:13 AM)
We are going to try something we have not done before , My assembly team will take pictures at the beginning and end of each day to show progress.
I would check the local pawn shops for your camera. Your assembly team jacked it.
You want them ttaking pics or finishing your car .... DOHHHH !!
We have been slamming .. I will get some stuff up today sometime .
pretty cool..
Picking it up the 27th, Thursday afternoon, will be in Glamis on Friday. I might be slightly excited so give me a wide path.
QUOTE(Frogisland @ Dec 24 2007, 07:12 PM)
Picking it up the 27th, Thursday afternoon, will be in Glamis on Friday. I might be slightly excited so give me a wide path.
How long are you stayin' man...... We will be out the 1st - 6th.... look forward to seeing you and the new car.
QUOTE(Deanasaurus @ Dec 25 2007, 06:09 AM)
QUOTE(Frogisland @ Dec 24 2007, 07:12 PM)
Picking it up the 27th, Thursday afternoon, will be in Glamis on Friday. I might be slightly excited so give me a wide path.
How long are you stayin' man...... We will be out the 1st - 6th.... look forward to seeing you and the new car.
Should be there on 28th and might stay until the 4th. Our plans are kind of fluid. Have to be back at work on the 7th and the drive is like many hours. Where you staying?
Looking forward to Duning with ya this weekend Buddy
QUOTE(Frogisland @ Dec 25 2007, 07:11 AM)
QUOTE(Deanasaurus @ Dec 25 2007, 06:09 AM)
QUOTE(Frogisland @ Dec 24 2007, 07:12 PM)
Picking it up the 27th, Thursday afternoon, will be in Glamis on Friday. I might be slightly excited so give me a wide path.
How long are you stayin' man...... We will be out the 1st - 6th.... look forward to seeing you and the new car.
Should be there on 28th and might stay until the 4th. Our plans are kind of fluid. Have to be back at work on the 7th and the drive is like many hours. Where you staying?
Gecko - PM me your # and we can hook up....
Give us a call to Bud.It has come full circle from giving all you guys Demo rides at Dunefest to now Duning with ya.Congrats again
QUOTE(SandTrap @ Dec 27 2007, 06:06 AM)
Give us a call to Bud.It has come full circle from giving all you guys Demo rides at Dunefest to now Duning with ya.Congrats again
He'll be there
We loaded the car up this morning for delivery to Kevin and Carolyn
This build took place without them ever visting the shop.
Click to view attachment
Click to view attachment
Click to view attachment
Click to view attachment
Thanks guys it was apleasure doing business with you.
Even though I did'nt post enough pics during the build process
Car turned out beeeeeeautiful!
That rail is SWEEEET!!!!!!!!!!! Enjoy!!!
It is so pretty! Kevin....I want go for a ride!!! So dont break before you get back home 
Very Nice
Grant, from placing the order to delivery, how much time was it?
QUOTE(Sand Tramp @ Dec 28 2007, 12:16 PM)
Grant, from placing the order to delivery, how much time was it?
He ordered at SSSS in Sept.
If you go to the thread on the CARB Compliant car , that was actully Frog's car to start with . When we looked at the schedule we decided we could do another one and still meeet Frog's delivery schedule.
Thanks for the info Grant. That is fast turn around for a bad ass car.
Very nice congrats! And nice job Grant!
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.