GlamisDunes.com > 2d Slightly Leaking Oil...

azpyroguy

Nov 17 2007, 08:34 PM

I just changed the oil in my 2D, and on the output shafts I am getting some seeping of oil now... its really slight... and only started after I put in new oil...could it be just a tad too much oil? I used 4Qts like the guys at Mende said, and used oil reccomended by them...

lincster

Nov 18 2007, 03:09 PM

Do you mean the axles?
Or where the shift tube goes in?

azpyroguy

Nov 18 2007, 03:20 PM

QUOTE(lincster @ Nov 18 2007, 04:09 PM)

Do you mean the axles?
Or where the shift tube goes in?

Yeah... the axles.

lincster

Nov 18 2007, 08:32 PM

If it is oil coming from around the big flanges that bolt to the tranny, not the CV's.
There are O rings behind those seals that can be replaced and this will stop the oil from leaking.
Happened to my buddies 2D.
New seals and it stopped.

azpyroguy

Nov 18 2007, 08:41 PM

QUOTE(lincster @ Nov 18 2007, 09:32 PM)

If it is oil coming from around the big flanges that bolt to the tranny, not the CV's.
There are O rings behind those seals that can be replaced and this will stop the oil from leaking.
Happened to my buddies 2D.
New seals and it stopped.

Yep.. thats right wher the oils is coming from... at least its an easy fix....

lincster

Nov 19 2007, 06:01 AM

QUOTE(azpyroguy @ Nov 18 2007, 09:41 PM)

QUOTE(lincster @ Nov 18 2007, 09:32 PM)

If it is oil coming from around the big flanges that bolt to the tranny, not the CV's.
There are O rings behind those seals that can be replaced and this will stop the oil from leaking.
Happened to my buddies 2D.
New seals and it stopped.

Yep.. thats right wher the oils is coming from... at least its an easy fix....

Yep, it is an easy fix.
Good luck.