Does anybody know if you can convert combo size spindle mount wheels to link pin?

if so what are the brg #'s

Thanks

You can but I don't remember the bearing #s. Just measure the outside diam of the spindle(large and small) and the inside of the wheel. Look up the sizes in Mcmaster carr or Fastenal websites.

pacifiic customs sells them..

Come on someone must know the numbers. I hate to reinvent the wheel!

Timken Bearings, these are for combo spindles and VW size hubs.

Inner bearing 15123
Inner race 15244
Outer bearing 07100
Outer race 07204
Outer combo seal 471831

Thanks virginsand but I am going the other way, Link pin spindle and combo hub!
So I still need help.

I believe the outter diameter is the same combo vs link. So in your case go get a set of stock link pin bearings.

No They aren't even close, but by measurement I came up with outer # 5972K56 & inner # 5972K57 from McMaster Carr.
http://www.mcmaster.com/