what do you guys think of these ????????????
anyone else see these

2008 Brand New Yamaha Rhino Copy!! MUST SEE TO APPRECIATE
WILL HAVE A TEST UNIT IN GORMAN SAT & SUN AUG 14-15
COME AND TEST FOR YOUR SELF
ALL OEM PARTS AND PERFORMANCE PARTS ARE INTERCHANGEABLE WITH YAMAHA RHINO
YOU WILL NOT BE ABLE TO DEFER FROM ONE TO ANOTHER
MUST SEE TO REALLY APPRECIATE
WHY SPEND DOUBLE WHEN YOU CAN SPEND HALF
FOR MORE INFO CALL ME AT 818 3882488

STOP YELLING AT US!

Think of what????

I wanna see this thing! Who built it?

The used ones are below half price, they better get that price a little lower!

This has Joyner written all over it.

it was on craigs list

Joyner! LOL

Dont by a knockoff bro - check the rhinos up for sale here - there are some SMOKING deals going on!!!

I know a guy with a Joyner, and not only was it half the price, it has been twice as reliable as a Rhino. He went through 1 CVT belt all season, and that's it. He takes it in hard pack and sand, and took it out at least 3 weekends per month all season.

I drive the snot out of mine and my friends beat theirs to death. Goes on it's lid, flip it over and go.

Ours all seem to be bullet proof asid from minor injuries (CV boot tore on mine)

more info
Bore X Stroke: 102mmX84mm
Compression Ratio: 9.2:1
ax.Power: 13.0kw/5500rpm, 17.5HP
Max.Torque: 23.5N.m/4500rpm
Tires/Front: AT25x8-12 radial
Tires/Rear: AT25x10-12 radial
LxWxH: 3010mmX1460mmX1840mm
Seat Height: 790mm
Wheelbase: 1890m
Ground Clearance: 245mm
Fuel Capacity: 29L
Dry Weight: 521KG
Light:12V35W/35Wx2,12V5Wx2(Front),12V5W/21Wx1(Rear)
Loading:4pc/20'GP,9pc/40'GP,18pc/40'HQ
Available in Red,black, blue, yellowcamo, greencamo
ENGINE & DRIVE TRAIN
DISPLACEMENT
686 cc
ENGINE
5 Valve, 4 stroke, 1 cylinder
cOOLING SYSTEM
Water cooled
TRANSMISSION
L-H-N-R-P
DRIVE
Axle
STARTER
Electric
IGNITION
CDI
Carbonation
PD42J-A
CHASSIS & SUSPENSION
FRONT/Rear SUSPENSION
independent double swing a
FRONT BRAKE
dual ventilated hydraulic disc
REAR BRAKE
ventilated hydraulic disc

So did anyone go?

Today is the 21st ya know...

One of theses maybe?

http://www.buggyworld.net/650cccommando.html

looks just like a rhino

a fake rolex looks just like the real one!!!!! its a chinese pos!!!!!!

http://www.utvguide.net/ruesch_xrl.htm

Might be this

Well well well, what have we here, another rhino bash, surprise surprise This is getting old Steve

this is on craigs list la area tried to past it but could get it to work

This one.
http://losangeles.craigslist.org/sfv/mcy/797117335.html

Hey, when they translate it from Chinese, that's amazingly close, much closer than I would have expected!

Ahh yes the Chino. Only 10% has to be differnt from it's counterpart. Rhino frame, motor, steering. Ranger bed. I hear theres a guy in Bako who sells these custom for about the same as a stock Rhino.

what to look for when u r buying a rhino thanks

Well Maintained like mine..

White Rhino here in Bullhead City, (they build all the 450 rhino parts) they have like 6 of these and they are bad ass you can bolt a rhino cdi box only in them and they do 60-61, they have a total different gear ratio, the low is almost our high, they are bad for the money they are made from 6 pm till 5 am in the same warehouse they build the Yamaha rhino. If I was buying new it would be one of these, they also have about 6 inches I think more bed for room for your rear seat so your kids legs are not squished.

there was some sick arse pics on there

Check this price out...


http://sacramento.craigslist.org/mcy/828648599.html

They are just like a rhino and yes you can put Rhino performance parts on them. the Clutches are already machined from the factory. They are only .003 away from a machined rhino clutch. Exhaust tip is already moded. They come with a winch and stereo, bed is 3" longer. Stock unit beat a 08 rhino with cdi in a race down the street 3 times. Procomm, dynatek cdi boxes work. I have a blue one with 4 seat kits. Extreme long travel kits fit. they only need to make one bushing different on the front a arm. Anyone want to know more about them PM me. I will post pics when I get back on Sunday. Everyone I show thinks they are a rhino and say they are a rhino after they drive it.

I am not talking about the Ruesch models. They only offer a 500cc I am talking about the 700 or 686 models.

Found a pic of a green one that I have

Does anyone know if these guys Ruesch are going to be at the SSSS?

that picture is not of a Ruesch unit. The Ruesch's only use a 500cc engine and don't come with a winch. The Ruesh units look pretty good though. They are like Joyner and have a factory in China make the unit for them and have some control over the product that is shipped to them.

Click to view attachment

ttt

The one you have pictured is the Scorpion right Squacher? thats the same one the guy here locally sells, and they are fast and Just as WELL built as the rhino. Saying is that they are built in the same facility just after hours!!!

I think he's in Hollywood???? ? is buy a new copy or just wait and save for one that’s has the upgrades all ready 4 seats etc $6,000.00 savable now .. Mmmm i guess I’ll keep look-in

ttt

anyone here have one of these

There are like 3 sitting @ WhiteRhino/Wet and Wild here in BHC. If your looking to buy one Call (928)754-wild(9453) and ask for Brian, tell him Peter sent you he's a way cool guy will tell you EVERYTHING about them. I am looking @ buying a motor from them as a spare for my rhino as they are bolt in for the rhino but WAY faster and ALOT more reliable!!!

just trying to decide buy a used rhino with moods 4 seat etc or buy one of these and do all the add on’s thanks for any input thanks

whom even sells these in the so cal area?

PM me and I can get you hooked up. No AZ tax if you are from cal.

Click to view attachmentClick to view attachment[attachmen
t=270653:Picture_285.jpg]Click to view attachment

Click to view attachmentClick to view attachment[attachmen
t=270658:Picture_291.jpg]Click to view attachment

this one was at sss 7,500.00 otd

As nice as that red rig looked at the show, I am still leery of buying anything that is a Chinese knock-off or a copy that is built "after hours". Every hand tool that I have had to depend on that was built in China was a knuckle-skinning POS, and every Chinese power tool knock-off I tried isn't worth half what was paid for it ten minutes after I bought it. Call me jaded, but I'll stick to a manufacturer that has a rep to uphold (Polaris, Yamaha etc.) over a no-name phantom factory in the Yangtze River valley...especially if it's motorized and can leave me stranded 20 miles from my truck.

Good luck on your search for a SxS! As for reliability, We have a 2006 Yam 660 4 seater with 1200 HARD miles all sand/hardpack/mountain trail rocky-ruts. I've had no belt/sheeve issues at all.

i wouldnt put my kids in that chinese pos, the cage metal is weak!!!

The cage is the EXACT same material as the stock rhino!!!

Seen them at the show . I woudnt know the difference.

same here there is a place in ontario ca 91764