Well I am tired of seeing my dad “Bustin-Bs” have all the fun on the 70’s, so I have decide to make my own with his supervision and his pocket book, in short his financial backing. Last year you saw some pics of a 70 my dad found on the road, well I have inherited that 70 as my own. I started my tear down and have an idea for a theme, but as most projects this will take some time and effort on my end.
Purchased an 88 top end kit, need to rebuild the motor and look into upgrading the oil pump. Also plan on getting the Sterdy pipe and going from there, this will not be ready for this year’s Regatta but I plan on having it complete by next year’s Tres Regatta.
Parts Needed=
Money $$
Gas Tank and Gas cap
Twist Throttle
On N Off switch
Plastics
Sterdy Pipe
chain
Tires
Powder Coat
Need some input on what gears will work best with this 88 kit.

This little guy stripped that frame like there was no tomorrow..
All i ask is for good grades and do your chores and help your mom out around the house and this project will move along smoothly. Like you said this project is going to take awhile

Click to view attachment

I have an extra tank... it's the old style and needs some work but I will see what I can do! Major dents so I need to take it down to a body shop or find a stud gun to borrow. It's all yours little man! Might need a gas cap too!

good start on your 70. keep the pics comin.

i also have a spare chain yours free if you would like to have it. let me know i will bring it to you tomorrow.

kewl thanx ill tell my dad we were going through all the parts we have and we found like two gas caps and a kill switch so that solves the problem for that

kewl nice awsome thank you very much

hey thank you very much guys it is alot of help and
i can get all the help i can get in parts thanks again
helps alot

last nigh we were sifiting through a box of parts and found a nice (decent) seat pan. That is one headache we dont' have to worrie about...

Hey dude, I got 2 hubs, sprocket, the part that holds the sprocket and one axle spacer (got jipped on E-bay for the other) You can have them little man.


Always good seeing another 70 build Good luck

That's very cool Josh!

Angelica said, "Way to go, Josh!"

what you runnin for bars? i may have an extra set of pro taper 50 bars hanging around here somewhere i could ship ya, anything to help a fellow kid out on is build, i've been there...

thank you very much i would love to have them thanx again i will have my father "bustin b's" pm you with our adress

thank you very much just got done taking apart the motor to awsome

Awesome. Have fun on the rebuild.

took off the top end and took off the clutch cover and will be prepping motor for the clutch kit and need to research the 88 kit we bought to see if it came with high flow oil pump
here are some updated pics

VERY COOL!!!!!!!!

Very cool Josh. Keep the pics coming.

Josh does better work then Bubbles...

Way to go Josh!

I received his report card time to purchase some parts...

Good job Josh!

That's great to hear!!

Nice!! Good job!!

Way to go Josh...

John would love to rebuild the 70 we have for him but I know squat about them, sheesh i'm lucky to service our quads keep up the good work

Sweet poster! No shop is complete without one. I'm just starting a 70 build too, but while you have been working, I have been wasting time on the internet. I have some catching up to do...

Project is driven by grades, personality and of course Money$$$$.

and chores and thank you every one for the support

any updates on the build?

Purchased a Sterdy high volume oil pump waiting on time and money now...

we got the sterdy product oil pump in today next we need a sterdy product clutch to put back together then we need to put the 88 kit on get plastic's paint a gastank it is a work in progress haha

Its coming along fine FTF great spending time with you on this build

sounds like your getting a lot of goodies going

Any chance it'll be done before the regatta?

Not this Regatta, he is shooting for next Regatta, wants to make a stunning (70) with Sterdy products....

Nice, that's the way to go. Take your time and do it up right

FTF need to update thread son...

i got a shop in orange county, let me know when your ready for powder coat. i'll hook you up...

Will do thanxs..

Removing the stock oil pump

Click to view attachment

Opening the oil hole

Click to view attachment


Hi flow Oil pump installation complete, time to clean exterier motor and replace points and work on installation of performance clutch (Sterdy)

tank donated by Troy Krum i need to get tank and start body work once we get the tank we need to get the points, and performance clutch instaled then put head back on got some parts in we are going to clean up the tank first put it in. Then think of the right color to paint frame

just instaled the sterdy products performance clutch
motor look's great wiil post instalation pics soon

FTF started on the motor, sand blasting some parts for paint--

Click to view attachment

Click to view attachment

Click to view attachment


Time to search for some paint and get the motor parts painted.. Will keep this post up to date as we make progress.

Where did you get the sand blaster? Very nice seeing the little man working on his own stuff! Love it! Can't wait to see some of it done!

my uncle let me use ithe sandblaster we
got the point's in and we painted the jug
need to paint alot before we do any thing
to the motor from here though

its coming along great.keep up the great work.

Anybody do paint? we are looking for a painter located in the IE area perferabily.

Well we are back at it, this build is back on track. Just assembled the top end and we are moving forward... Will post pics soon of our progress...

We got the frame and some motor part's powder coated look's great, getting more part's together to get powder coated as well. it is coming along great

some of the powder coated part's


Click to view attachment
Click to view attachment
Click to view attachment
Click to view attachment

Good pixs FTF, coming along just fine

Looks like your bike is going to be SWEET!!!!! Nice job FTF

Love it!!!

keep the pics comming

Nice! Is that a metal flake powder?
Cool chain tensioner BTW.

we got more powder coated part's in a kinda glossy wet black

Click to view attachment
Click to view attachment
Click to view attachment
Click to view attachment