Wet Black parts look incredible in person....

Nice FTF

Wow... is that black still wet! Shiny shiny! Love it... sure does look good!

FTF make sure you remember how to put that 88 kit on so that you can come over and help me with mine... The 70 sure is looking good keep the pics coming.

Pictures just don't do just to how sweet those parts look...

We will have to update the pics this weekend, 88 kit looks pretty straight forward just have to make sure the timing on the top side of the motor is correct. We took it apart twice and i am considering taking it apart again just to make sure we are dead center....

I know some one whos gonna read this tonight

Did you go with the bigger oil pump? You'll need to drill out the oil passages.

Yes Sir--

Click to view attachment

Josh working hard..great work mijo..

FTF looking good kido. keep up the good work!!!!

thank you every one for all the support we just got out of the garage we finished the motor yesterday. Thank's to TK for the points adjustment. Today we set the motor in the frame ang got together part's to get powdercoated the bike is lookin good.

Lets see it / snap some photos!!!!

A few pixs of FTF putting the top end on and verification that the timing marks match...


Click to view attachment
Click to view attachment
Click to view attachment

here are the recent pics

Click to view attachment
TK soldering

Click to view attachment

Click to view attachment
motor in frame

:::: A few more ::::

Click to view attachment

Click to view attachment

Good times, this build is getting closer to being complete...

Lucky boy! Should be done in the next couple of months.

cant wait till it is done just want to ride it

I want to feel the power of the 88 kit... see if it takes your mom's 110. I would have said your dad's 110 but we all know your mom's is faster!

I know it feels like its taking forever but it wont be long now.

thank's every one

TK good one haha just as long as it is'nt at night though haha

Pressed rear bearings and seals in today installed break shoes, axle ect mounted exterior covers here are a few pictures of todays works..

Click to view attachment
Click to view attachment

LOOKING AWESOME!!!!!!!

way to go FTF

Those little red accents are cool, it will defiantly set off the gray and black. Very nice job

Yeaaah!!!!!!! gonna be a great looking bike. Way cool that you have done all the work. Something to be real proud of.

Now if I could just get them to concentrate on doing the bodywork on the tank so I can drop them off for the wrap

we need to go to my grandpa's house so he can help us do the body work on the tank it's just a little dent so it should'nt be too hard i love the red part's too i thought i would go with the nut and bolt's to be red so it would look good but it turned out realy good. we are going to get the valvstem cap's in the wheel's tomorrow the bolt's connecting the wet black weel's are red as well my uncle got us some realy cool allen wrench bolt's for part's of the motor with some realy cool bronze washer's. But first we need to work on the tank so we can get it wraped

We will get that going, just nice too look across the garage and see an almost complete (70) sitting on the bench. Also we are still gathering art work for the design....

Looking great!!

wheels are put together we are getting the tank ready for the bodywork then we get the tank and plastics wraped

got the axle and wheels on the bike look's great here are some pics

Click to view attachment

Click to view attachment

Click to view attachment

Click to view attachment

Click to view attachment

looks good FTF, just a few more items to get and we can fire her up...

yay

You still going twist throttle or decide aganst it?

Coming along nice, But we need to see some up close detail pics of your work before the plastics go on.

He still plans on going twist just the funds for this project are short, looks like we will have to go thumb then upgrade when the funds are back up. right now we are still within the budget set for this build. Just lacking funds, i blame the economy for this or Chummin you decided...

Agree, the pictures don't show the detail to well, we will have to take up close pictures this weekend,,,

Looking good!

TD thank you for the stock tool, i had to put it on the bike. It needs to be powder coated but; well we couldn't wait to put it on.

Very welcome.

thank you every one i cant wait till we can fire her up i realy want the twist throttle as well and the push to kill button will be able to go on as soon as we can get a twist

I have the seat bracket 4 you / will you be in the pound over the holiday / I will bring it????? It will cost you an ICE COLD CORONA!!!

we plan on being but we just dont know

FTF the years not over yet may be enough time to pull one through with the man in red! chores ontime and stuff like that!

This year Christmas came early for me, a man not in red came through with a twista for me thanks TigAjoe! Really nice meeting you and enjoyed listening to you and my dad talk 70...
One step closer to finishing the build, could'nt wait to get home and put the twista on here are some pics---
Click to view attachment

Had Big PaPa (bustin-bs) posse for this one
Click to view attachment

Thanks again Joe, and great kicking it with you over a cup of Peppermint Latte'

How cool is that, Btw the electrical and throttle cable run down the frame on the other side of the steering stem

talking about not wasting any time. Your quite welcome Nice hooking up with you guys!

Hey you gotta put tires on thing to ride it.

Tires? I figure it only needs one more. Is there an added tire required?

You guys gonna have done for the next trip?

Our goals is before the Regatta TRES! Body work on tank is in progress have a few more things to do for the plastics then we are set. If all goes well, hopefuly we can fire it up this year... Just have to keep our fingers crossed...