If you bore a Banshee .75 over, what is the displacement? Stock is 347. I was never good in math.

If im not mistaken I think thats a big bore, are you going to sleeve it? Vitos performace has some great banshee kits

according to the guy doing it, that is only the third stage of the bore. I guess you can bore a banshee six times before a sleeve.

ask this question at

banshee headquarters

i go there when i have a tech question that might not be anwsered in here.

rich

I was very good a math, but there isn't much match in this I think.

Maybe I am wrong, but this is what I hear the mechanics say all the time.
Assume your banshee is a 350 just to deal with rounded numbers, then everytime you bore the cylinder it has to be in .025 increments. So the first bore turns the cylinder into a 360cc, the next .025 bore will make your cylinder a 370cc, and so on.

Who knows

368 cc

Equation: Cubic Inches = 0.7854 x Num of Cyl x Stroke x bore x bore .
Cubic Inches to cubic centimeters (CC) multiply by 16.39 .
.075 over 0.7854 x 2 x 2.126 x 2.595 x 2.595 = 22.49 x 16.39 = 368 cc .


10 mm stoker

10 x 0.03937 = o.3937 + 2.126 = 2.52 .
0.7854 x 2 x 2.52 x 2.520 x 2.520 = 25.14 x 16.39 = 412 cc ??

My she is 100 over and its last bore before having to sleeve is what I was told.