Looking for a good place to work on my motor. Also, any good tips before I spend the money. Is there better gears I can buy, what's my best route? Any info would be great. Thanks.
Motor is in my King Sand Car.
Full Version: Hayabusa Owner's
headsup, scott.....909-392-2233, tell him Yoshi sent ya and you might get a free lollipop if you spend over 10k with him......
headsup is out of Vegas, any good shops in So Cal?
bumb for anymore info, thanks
I think that Heads-up is now in LaVerne ,Ca. Scott seems to be the best there is on these motors give him a call AT
909-392-2233 . The hot set up seems to be back cutting the trans gears . KSC fourm I think has so info on it also try looking over there good luck
909-392-2233 . The hot set up seems to be back cutting the trans gears . KSC fourm I think has so info on it also try looking over there good luck
get a race cut done on trans (type of back cut) by R&D. Scott at Heads Up can get you in touch w/ them, they are the best at the trans work...
QUOTE (spencerbuggy @ May 20 2009, 01:05 PM) 
headsup is out of Vegas, any good shops in So Cal?
If you find anything out, let me know! I'd like to know for future referece. I'm just south of you in Vista. I work on Pendleton.
Check some of your local Dirt tracks Mini Sprint Clubs and see where they are taking there stuff to. A buddy of mine is into them big time here in Az. and they are doing crazy things to there mini sprints engines.
Take the motor out yourself...its easy and takes all of 2 hours. Take it to scott and get back cut gears put in it. I did the same thing to mine. Give me a call if you want more info...you have my #!
QUOTE (crappy @ May 20 2009, 02:49 PM)
I think that Heads-up is now in LaVerne ,Ca. Scott seems to be the best there is on these motors give him a call AT
909-392-2233 . The hot set up seems to be back cutting the trans gears . KSC fourm I think has so info on it also try looking over there good luck
909-392-2233 . The hot set up seems to be back cutting the trans gears . KSC fourm I think has so info on it also try looking over there good luck
Thanks for the info. KSC is taking care of it on monday.
A.P.E.
7347 Rosamond Blvd.
Rosamond, Ca. 93560
http://www.hayabusazone.com/
http://www.aperaceparts.com/transmissions.html
7347 Rosamond Blvd.
Rosamond, Ca. 93560
http://www.hayabusazone.com/
http://www.aperaceparts.com/transmissions.html
QUOTE (DareDevilDave @ May 21 2009, 08:50 PM)
A.P.E.
7347 Rosamond Blvd.
Rosamond, Ca. 93560
http://www.hayabusazone.com/
http://www.aperaceparts.com/transmissions.html
7347 Rosamond Blvd.
Rosamond, Ca. 93560
http://www.hayabusazone.com/
http://www.aperaceparts.com/transmissions.html
Thats great info. Thanks DDD
I tried calling Heads Up and their phone is down...
Has anyone ever used Crago Racing in Van Nuys?
http://www.cragoracing.com/
I called Hayabusa Zone and they recommended these guys. I called them up and a guy named Jeff helped me out and answered all my questions. He was a very friendly guy. Anyway, he quoted me approximately $1,500-$1,800 for a rebuild. I asked about upgrading the engine, and: back-cut gears, a cam, an upgraded input shaft, billet clutch basket with stronger clutch, porting and upgraded valves is approximately $4,300. They will take the engine out and put it back in while doing the work for an additional $350.
Has anyone ever used Crago Racing in Van Nuys?
http://www.cragoracing.com/
I called Hayabusa Zone and they recommended these guys. I called them up and a guy named Jeff helped me out and answered all my questions. He was a very friendly guy. Anyway, he quoted me approximately $1,500-$1,800 for a rebuild. I asked about upgrading the engine, and: back-cut gears, a cam, an upgraded input shaft, billet clutch basket with stronger clutch, porting and upgraded valves is approximately $4,300. They will take the engine out and put it back in while doing the work for an additional $350.
QUOTE (feedmelies @ Sep 22 2009, 12:52 PM)
I tried calling Heads Up and their phone is down...
Has anyone ever used Crago Racing in Van Nuys?
http://www.cragoracing.com/
I called Hayabusa Zone and they recommended these guys. I called them up and a guy named Jeff helped me out and answered all my questions. He was a very friendly guy. Anyway, he quoted me approximately $1,500-$1,800 for a rebuild. I asked about upgrading the engine, and: back-cut gears, a cam, an upgraded input shaft, billet clutch basket with stronger clutch, porting and upgraded valves is approximately $4,300. They will take the engine out and put it back in while doing the work for an additional $350.
Has anyone ever used Crago Racing in Van Nuys?
http://www.cragoracing.com/
I called Hayabusa Zone and they recommended these guys. I called them up and a guy named Jeff helped me out and answered all my questions. He was a very friendly guy. Anyway, he quoted me approximately $1,500-$1,800 for a rebuild. I asked about upgrading the engine, and: back-cut gears, a cam, an upgraded input shaft, billet clutch basket with stronger clutch, porting and upgraded valves is approximately $4,300. They will take the engine out and put it back in while doing the work for an additional $350.
I think I ended up paying around 1000 for undercut gears and some other parts that Scott at heads up thought I needed. Great guy to work with. 350 to pull and replace the motor is a deal. (I think)
Ill have to check these guys out next year when Ill be ready for more HP. Thanks for the info. Are you going to get these upgrades done?
QUOTE (spencerbuggy @ Sep 22 2009, 01:22 PM)
QUOTE (feedmelies @ Sep 22 2009, 12:52 PM)
I tried calling Heads Up and their phone is down...
Has anyone ever used Crago Racing in Van Nuys?
http://www.cragoracing.com/
I called Hayabusa Zone and they recommended these guys. I called them up and a guy named Jeff helped me out and answered all my questions. He was a very friendly guy. Anyway, he quoted me approximately $1,500-$1,800 for a rebuild. I asked about upgrading the engine, and: back-cut gears, a cam, an upgraded input shaft, billet clutch basket with stronger clutch, porting and upgraded valves is approximately $4,300. They will take the engine out and put it back in while doing the work for an additional $350.
Has anyone ever used Crago Racing in Van Nuys?
http://www.cragoracing.com/
I called Hayabusa Zone and they recommended these guys. I called them up and a guy named Jeff helped me out and answered all my questions. He was a very friendly guy. Anyway, he quoted me approximately $1,500-$1,800 for a rebuild. I asked about upgrading the engine, and: back-cut gears, a cam, an upgraded input shaft, billet clutch basket with stronger clutch, porting and upgraded valves is approximately $4,300. They will take the engine out and put it back in while doing the work for an additional $350.
I think I ended up paying around 1000 for undercut gears and some other parts that Scott at heads up thought I needed. Great guy to work with. 350 to pull and replace the motor is a deal. (I think)
Ill have to check these guys out next year when Ill be ready for more HP. Thanks for the info. Are you going to get these upgrades done?
If I don't find a good buyer for my rail I may. It depends on whether or not I get the job I interviewed for today!
QUOTE (feedmelies @ Sep 22 2009, 01:55 PM)
QUOTE (spencerbuggy @ Sep 22 2009, 01:22 PM)
QUOTE (feedmelies @ Sep 22 2009, 12:52 PM)
I tried calling Heads Up and their phone is down...
Has anyone ever used Crago Racing in Van Nuys?
http://www.cragoracing.com/
I called Hayabusa Zone and they recommended these guys. I called them up and a guy named Jeff helped me out and answered all my questions. He was a very friendly guy. Anyway, he quoted me approximately $1,500-$1,800 for a rebuild. I asked about upgrading the engine, and: back-cut gears, a cam, an upgraded input shaft, billet clutch basket with stronger clutch, porting and upgraded valves is approximately $4,300. They will take the engine out and put it back in while doing the work for an additional $350.
Has anyone ever used Crago Racing in Van Nuys?
http://www.cragoracing.com/
I called Hayabusa Zone and they recommended these guys. I called them up and a guy named Jeff helped me out and answered all my questions. He was a very friendly guy. Anyway, he quoted me approximately $1,500-$1,800 for a rebuild. I asked about upgrading the engine, and: back-cut gears, a cam, an upgraded input shaft, billet clutch basket with stronger clutch, porting and upgraded valves is approximately $4,300. They will take the engine out and put it back in while doing the work for an additional $350.
I think I ended up paying around 1000 for undercut gears and some other parts that Scott at heads up thought I needed. Great guy to work with. 350 to pull and replace the motor is a deal. (I think)
Ill have to check these guys out next year when Ill be ready for more HP. Thanks for the info. Are you going to get these upgrades done?
If I don't find a good buyer for my rail I may. It depends on whether or not I get the job I interviewed for today!
Good luck, Hope all goes well for ya.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.