If anybody in here is looking for a Machinery Mover I give great service and even better rates.

If you are in the Off Road industry I am also willing to trade Move Jobs for parts and or product or even service work as I always have some kind of project going on.

I can also locate Machinery and Material handling equipment if your looking to purchase.

Here's a list of the Off Road Business's I have done work for and or sold equipment to. (Delivered of course)

Toyz 4 Big Boyz
MoseBillt
QuickSand Performance
Extreme Performance
PRP
Porter Race Cars
BuggyWorks
CBM
Extreme Fabrication
Dasa Performance
KW Machine Works

I also have done and currently do Business with quite a few board members of GD.COM who have been very pleased with the service I provide.

Any questions do not hesitate to give me a call or send me a PM. Thanks, Bryan 951-522-3626

Don't forget to mention you are a GD.COM member for special rates and deals

Below is a link to my Website with some more information.

Bryan's Machinery Moving

I'll pass this along to our facilities guy. We'll be moving in about 2 weeks, several pieces of significant equipment.

Thankyou for becoming a "Preferred Sponsor" I know it takes guys like you so that guys like me can use GD.COM Thanks Shawn

Thank you! That would be awesome

what kinds of trailers do you have? How large is your insurance coverage?

I have 48' x 102" step decks and double drops on air ride. I carry 2,000,000.00 insurance but can get a balloon for more if you have a job that requires it.

Been moving some pretty neat stuff lately......

wheres the pics then....

Well.....most of them I can't post pics. Here's one that I can because it's not classified or top secret....

It's used for loading missiles onto Submarines.

40' long by 9' in diameter and weighs 42,000lbs. Loaded onto a line truck headed to Washington...

Click to view attachment
Click to view attachment

how we looking for the big hydro?

Here's the machine. 976,000lbs....

Workin on it....

Click to view attachment

Here's a pic or 2 from a job where we had a 75,00lb set of Steel Rolls that 6overZilla sent a 275 Ton Hydro Crane out for us.

I didn't wanna start pickin it out of the pit with my Big Lift to find out it weighed 120K'lbs.

We took down a bridge crane that was over the rolls and the one cross beam was impossible to get to with a forklift.

I improvised. I put my customers forklift on my spread axle trailer, dumped the air in the rear axle, backed over the 7' deep pit and away we go....

Had to throw my small lift on the upper deck to get some traction for my drive tires.

Here's my 15 Five with a big stiffy....

Click to view attachment
Click to view attachment
Click to view attachment
Click to view attachment
Click to view attachment

Tell me more about the "Big Hydro" it's givin' me wood.........

Don't make me come down there and move it with my floor jack.....

Here's the rolls that 6overzilla sent the 275 Ton out for me....I really wanted to play with that thing.

Click to view attachment
Click to view attachment
Click to view attachment


Here's me.....

Click to view attachment

6overZilla is talking about the big 550 Ton Hydro crane. I'm considering using it to take apart this Hufford as opposed to forklifts...

Alright you made me switch computers and dig into the picture files.....Here' a monster move for ya' 20'x10' Tuff-Shed, insulated, plywood lined, fully wired with shelves. Were doing some land division work for a developer and he says I need this lot cleared. Take it all.....

No problem....Just whip up some slings and a wide load sign and we are off. Now it lives behind my shop.


Click to view attachment
Click to view attachment

the big hydro is our 550 Ton Grove in my avatar, ive got better shots of it i will track down

Here's a bridge mill we took out last month. A little over 100,000lbs each.

Nasty effers, what a mess. Here's what ot looked like when we were done...

Click to view attachment
Click to view attachment
Click to view attachment

.

I'm trying to buy this forklift right now. It's a 80,000LB Rigger Lift w/ Hydro Boom and Counterweights.

With a third counterweight it will pick and walk with 120,000lbs.

I'll know the week after next if I'm getting it. If I do it's gonna get a makeover and look and function like new...

If I do get it I'll probably never get to drive my new buggy because I'll need to replenish a little bit of what it's gonna cost me.

That's OK though....it will put me at the next level and I'll be capable of going airborne with 200,000lbs.

I'm praying I get this ugly beast...

Click to view attachment
Click to view attachment
Click to view attachment
Click to view attachment
Click to view attachment