I am running all stock fuel filter. I have been looking around and have been hearing that going to an inline fuel filter is a better way too go? I'm trying to find out what all has to be done to change over! If you have any input it would be greatly appreciated.

Thanks too all,

Rob

Hey Rob. It's a pretty easy job. Drain your gas and remove your tank. Yoe need to open the swirl tank/pot. Open very carefully to preserve the gasket. Take out the filter(it looks like a tea bag.) Reassemble.(be carefull when putting the swirl tank back together, they like to leak). Splice in the inline. All done. Make sure the arrow on the filter points to the fuel pump. Here are a couple proven filters that have enough flow and filtration. I ran the spectre. P.S. The swirl tank might be corroded just clean it with a wire brush.

http://www.jegs.com/i/Spectre/865/2220/100...CFSn6agodUQpIWg
Or this one NAPA gold 3011

Thank you Wingnut for the run threw!

Btw does the "wingnut" nick name come from you working on Aircraft?

I worked on F-15E for 6 years in the Air Force! I have a couple guys I work with now that call me that at work!

Thanks again,

Rob