mild steel chassis, 2 or 4 seat rear engine, 2 seast mid, 4130suspension with 20" travel all 4 corners.....$4500.00 chassis kit for GD members...rollers are $13,700.00

Hey John, can you list whats either on or left to be put on one of your rollers to have a turnkey??

rollers come with seats, single shock (Radflo), springs, front combo brakes, rear micro-stubs, Douglas non bead lock wheels with 8.50 front and 1300 rear tires, rack, radiator, gas tank, pedals and steering brake, and seat belts......you need motor/trans/plumbing/wiring and axles....for turn key.

Wow sounds like a great deal ... nice looking car btw

great looking cars at a decent price

hello john
Do you have any pics of the 2 seater with the body panels on it. what are the measurements of the buggy?
thanks

13'6" overall length, 88" rear track (with Douglas 3.5" offset wheels), 83" front-50" inside midrail width, 20" travel all 4 corners....i will take some pics of a couple with aluminum at my shop right now, tomorrow...

oh wait-here is a couple....i will take better tomorrow.

What would the cost be for the four seat chassis tabbed for 091/subie 2.0 turbo/radiator set.Skinned with body panels(hood,roof and sides) and light bar for 4/5 hids on top.Also do you have any pics of this chassis finished?
Thanks,
Doug

$4500.00 for chassis kit + $1200.00 for hood, roof, sides and simple dash + light bar (no lights) for $220.00 = $5920.00.....so far people are just buying the kits and finishing them themselves...so no finished pics yet, but the 4 seat chassis looks almost identical to my "standard" car...except it doesnt have all the fancy aluminum and dual shocks and stuff...here's a couple pics..

very interested in a 4 seat chassis. is that in d.o.m. ?
is it tabbed?
how much to upgrade to boxed lower front arms?
boxed trailing arms?
1 3/4" chassis?
how about dropping the roof line down 4" or so?

emil miller is doing the sheetmetal on my 1300vtwin rhino and i love the chassis of your in his shop that he is doing the full body on.
he will do the tin work on mine for sure.

also i have fox 2.5 x 12" front shocks
2.5x14 rear coil carryer and a 2.5x18 bypass for the rear, will that fit?
and my rear bench is 52" will that fit?

What is included with the chassis kit?

Thanks

fully tabbed chassis, 4130 upper and lower a-arms, spindles, tie-rods, steering column with tilt, drivers seat slider, tie-rod seperator, rack, rear trailing arms, aluminum floors and skid plate.....

How much more for DOM and chromoly?

Thanks

DOM $450, 4130 $890.00....

Is the rear seat area wide enough for 3 buckets??

48" bench fits....its 52" in-between the midrail tubes.

Would the hood look like the one in the picture of the black car you posted??

these are "standard" bodies...hood is like the one pictured, but a full length can be done also. wing trunk is extra as well.....

What is the measurement between the bottom rail of the frame and the top of the cage where the drivers head would be? My car now is 40" and it's kinda close with a helmet on. It there a standard height?

Thanks.

44" in-between, but can be made taller if needed.

What is the Difference between a standard Chassis and the econo? Shocks, panels, price?

i make several different chassis in different sizes and materials...4130, DOM and mild steel...the "inexpensive", the econo comes standard in mild steel with 4130 arms. you can upgrade the chassis to DOM or 4130..standard body's for thid chassis are roof, side panels, short hood and dash...more affects price of course..dual shock mounts can also be had, at a slight price increase.

So basically i need to get my lazy ass down to your shop and look at some stuff to decide how much money i want to throw at this thing

That's what I did.