Where do you get aluminum one's or does anyone have some?

I was hoping these G-Force hubs would slide right on. I think I have read that 400ex hubs use the same splines as a 70.

correct me if I am wrong...

It does require you go with Honda 110mm four bolt wheels.

Those are nice but I did not see anything with three wholes for the stock wheels.

I have some bill I will just add it to your tab

Man these fit like a glove...
Click to view attachment
Click to view attachment
Before
Click to view attachment
After
Click to view attachment

Perfect.

Those look nice.
Where can you get those?
What material are they made from?

I've been thinkin' bout machining some, but if these are cheap I'd like to save the time.

R-

Randy,

Make some 2.5 - 3 inches thick and sell em with the other parts.....There is a need for these!!!

Ill tale a set.......Randy does some great stuff!!!

Randy does make wicked stuff, love my bar risers and I would take a set or two of spacers too.
TMAS

other thickness are available

I made some for me and conner...have a third set almost done for Greengo. I did mine the hard way but still, plate was only $28 and I got 3 sets out of it. About $9 a set plus my sweat

FNG post some pics lets see them...

Dont the 225dx spacers fit?

Yes they do, but are hard to find.

bustin dose not lie when he says fit like a glove coming from the kid who put them on very easy slps right on then tire very easy

ok so who do i paypal to get a set

No way! They look the same basically but are way ugly cuz I had to use these...

Me too!

Let me know how thick you guys need/want them and i will get you the info. I guess i should start a thread on this...

I was wondering on the thickness of the spacer too, Any ideas anyone?
tmas

I made mine 3/4" it's ok, but for me, 1" would of been better but if you have a big azz heel (if this is for a kickstart) go with 1 1/2" maybe

X3

I would like a set of those also

so 1 1/2 inches to clear the kick starter?

Guys PM me what you want size, for now the biggest is 1 1/2, let me know so i can notify the person who makes them to schedule them in on his CNC..

TTT Sista

1 1/2 is fine with me

Slightly off topic here but i was wondering if anyone has had problems with spacers bigger than 1 1/2in putting to much stress on the axle or hubs?

I just made some that are about 3in wide for my FS project and they have made it really stable but i am worried about the offset causing problems.

I would think it would be a good no great idea when going that large on a wheel spacer that you look at grade 8 bolts. I would also drill out the hubs and use bolts to secure the wheels and spacers... Just my 2 cents worth..

I know a friend that has a friend who knows a friend that makes these things.......

I have another shipment of spacer in this week/weekend PM me if interested

I'm intestested in a set of these are they still available?

PM sent

Oh really???