If I measure with a tape, the whole unit, the Uni Pod filter and the orange outer part...it's 3 " long and 3" in diameter

For the people that are running them, where are you getting them? Or maybe you can just give me a part number and I can order them anywhere they sell OuterWear

thanks

You want UNI part number 4152AST. Angled filter with a 1.5 inch inlet assuming you are running a 20 or 22mm carb.

My bad. I gave you the number of the filter itself. I haven't seen an outerwear for that small a filter.

i have one I got from scribbs / not sure of the PN / Take the filter down there...cool guys and they are near you. Please post # if you go....They are essential and I am way too lax about using them!!!

Great post Steve!!!

I believe that filter is 3.5" diameter and 4" long. If that is the case, then this prefilter will fit:
http://www.knfilters.com/search/product.aspx?Prod=RU-0500PK

If the filter really is 3" x 3" the you'd want this one:
http://www.knfilters.com/search/product.aspx?Prod=22-8008PK

Or go here and you can look up any size you need:
http://www.knfilters.com/search/wrap.aspx

Hey Poule, I'll go down tomorrow

Thanks kazuaki

Here's one that will fit.

HONDA TRX90 10-1035

Ok so...the 3 by 3 works perfect without the orange foam on the outside...so just the pod filter alone. 22-8008PK


So I'm guessing the 3-1/2 4 RU-0500PK will work if you want to use the orange foam too.

Contact Gordy, he has the right one in stock...