Does anyone know how much oil goes in the t-case of a blaster.

it should say on the side of the case something like 750ml. that is completely dry yours should be a littel less.

Look to see if the case has a window. Fill tell it's full or to the full line. Or if it has a screw on the side of the case pull it and fill the case until the oil starts to drain out the hole.

If that don't work kick back and have another beer.

Mr. Dune was pretty close... But make sure you warm up the engine first. Here is how the manual says to do it.

1. Place the machine on a level place
2. Warm up the engine for several minutes and stop it.
3. Check the oil level through the level window located at the right side crankcase cover

Note: Wait a few minutes until the oil level settles before checking

4.The oil level hould be betweeen the maximum and minumum marks. If the level is low, add oil to raise it to the proper level

Recomended oil: Yamalube 4 (10W30) or SAE 10W30
Oil quantity:
Total amount: 0.7L (0.62 Imp qt, 0.74 US qt)
Periodic: 0.65L ( 0.57 Imp qt, 0.69 US qt)