btbell1323
Jun 5 2011, 02:52 PM
I have a LE3505 Weekend Warrior and over the weekend I couldnt get any hot water out of all the faucets.
When turning on any faucet to hot nothing comes out.
There is water in the hot water heater.
It worked Saturday morning, then Saturday night nothing.
What could be wrong???
Any ideas??
Lil Fuzz
Jun 5 2011, 03:38 PM
Blown fuse, I believe on my old warrior there was actually a wire with a built in fuse that I bypassed. Not sure what there called.
hondajimz
Jun 5 2011, 03:42 PM
Out of Propane ?? LOL
Cookie
Jun 5 2011, 03:48 PM
No water at all coming out?
btbell1323
Jun 5 2011, 04:22 PM
QUOTE (alxcook @ Jun 5 2011, 04:48 PM)

No water at all coming out?
No water at all coming out of any faucet or shower
Cold water does come out when on cold setting
bagman
Jun 5 2011, 04:27 PM
Could be plugged with sediment.
Mongo
Jun 5 2011, 05:36 PM
There is a valve to bypass the water heater. Pass side compartment, look up.
Easy to hit it with a chair or something when you load up. No hot water at faucets, but its hot at the tank.
Dont ask how I know that...
There is also a thermal fuse right at the board on the water heater, that would make no hot water in the tank...
bagman
Jun 5 2011, 06:18 PM
QUOTE (Mongo @ Jun 5 2011, 06:36 PM)

There is a valve to bypass the water heater. Pass side compartment, look up.
Easy to hit it with a chair or something when you load up. No hot water at faucets, but its hot at the tank.
Dont ask how I know that...
There is also a thermal fuse right at the board on the water heater, that would make no hot water in the tank...
I was going to say that but the OP stated twice that he was not getting any water, hot or cold.
Perhaps there are isolation valves that could have been bumped.
btbell1323
Jun 10 2011, 07:13 PM
Bypass Valve is not on.
I cant fugure this thing out.
Why would there be cold water on cold setting but no thing coming out of hot water setting on any faucet or shower.
There is hot water in the water heater.
Any ideas???
bagman
Jun 10 2011, 07:39 PM
You could try removing the T&P valve, turn on the pump and see if water comes out.
BigBlockTank
Jun 11 2011, 07:57 AM
Turn off the pump, and the heat source for the water heater. Use a 7/8 socket or wrench, and pull the (?) white drain plug out. See what comes out. If it's a lot of white chunky stuff, let it drain, and refill. Fluch the lines out, if you can. That may involve getting to the back side of the water heater. Figure which line is from the tank, and which one feeds the trailer, and fluch that line?
Not to insult yore intelligence, but you have to go from the known to the unknown. Take it 1 step at a time. Water in the water heater tank? Water in the lines from the tank? All faucets not getting water from the hot knob?
You can take a hose from yore compressor, but be very careful, those lines are a type of plastic. So, don't use any more than 15-25lbs. of air pressure, if you decide to blow the lines out.
Let us know what happens.
btbell1323
Jun 21 2011, 03:40 PM
Ended up being the check valve in the back of the water heater tank.
$7 from Camping World.
Lil Fuzz
Jun 21 2011, 04:07 PM
Thanks for the update I was curious what it ended up being. Glad you got it figure out and For cheap!
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.