Are there any tips for installing a kill switch for the YFM350S-2004?

Uh a warrior? is it a pro desgin tether switch? on my Z there is a short wire on the kill switch thats the wire to ground then a long wire that ya hook up to the pulse wire on the cdi, im not sue if its the same as the warrior though

Thanks.... The bike is a Raptor 350 and Yes, it is a pro-design kill switch. I have another stupid question.. we won't say why I am asking it either... ok? Ok. The wires were accidentally cut and we don't know which wire is the short one for the ground. I have the two wires coming up out of the switch, the top and then one coming out the bottom.

Any ideas?

Thanks in advance.

The one coming out of the aluminum part were theres metal is the ground wire, and the 1 coming out of the part that moves is the pulse wire

Thanks again....

I should have asked this in the last question...

There are two wires one that is red with white tracer and a red with black tracer....off the main kill switch on the bike itself.

Does it matter which wire you use from the bike's kill switch to connect with the wire from the pro-design kill switch ( pulse wire)?. Clear as mud???

I think I got it right....

The groud wire on the tether jsut ground it to the hondle bar mounts or a bolt connecting to the frame, um and im not sure which wire ya should hook the hot wire to because my Z is diferent but i hooked mine to the cdi wire because if i were to hook it up to the stock kill switch it would blow a fuse, so if ya look on the cdi there should be a wire and then hook it to that

MUCHO GRACIAS POR FAVOR.... Thanks a bunch! This Arizona life is growing on me..... hehehehe...

Let me know if it works

Before I go and do this..... Can I fry my cdi? If so, I may wait for some additional help tomorrow.

i dont think so, but to be safe i would wait for more info to

Just go search on www.bluetraxx.com . I am sure someone there has done this to a warrior.(same bike).

Thanks,.... I'll check it out

D