Well im boring out my cylidner to 94mm from 90mm, and well i need to find a machine shop, hopefully one that does work on engines, and also does nikasiling, i was going to send my cylinder out to millenium tech, but we are planning on going out sometime after christmas, and in order to do that ther is no time to send my piston out and have them get it done and back to me, so i am looking for local places, im gonna cal duncan racing see if theydo it, and if not any recomended places, and then ill call this place in riverside called phat head racing, they have been recomended by someone, they have 35 years i believe under their belt, and seem to have a good price,
so does anyone know of a place down here that could bore and re-nikasil my cylinder?
Full Version: Machine Shop In San Diego
Call Larry at Racers Toy Store in Escondido. He does everything in house and just did a big bore kit on my DS650.
il try him, oh and how much was it? number?
| QUOTE (SHOCKER @ Dec 11 2004, 09:37 AM) |
| il try him, oh and how much was it? number? |
I spent over $3500 on my motor work but it was very extensive.
Racers Toy Store
421 S Andreasen Dr
Escondido, CA
(760) 745-4845
i second racers toy store
I called albe for recomendations adn they said the same, but racers toy store and all other machine shops are closed today 
,
and the piston i need wont be in until about 1 week or so, and i need to send in the piston with the cylinder, so im getting mad, alba doesnt have the JE piston in stock now, well they dont have the 94mm which is 434cc, and the only ones they have in stock is stock bore, and then the 92mm, which is 416cc, and i want to go the 434 route because im doing it and i might as well do what i want, and ther really isnt much of a price diference
know of any places that will carry the 94mm 12:1 JE piston, its their high comp one, and i like it because i can still use 91 isntead of 97 or mixing race gas or anything like the wiseco kits
,and the piston i need wont be in until about 1 week or so, and i need to send in the piston with the cylinder, so im getting mad, alba doesnt have the JE piston in stock now, well they dont have the 94mm which is 434cc, and the only ones they have in stock is stock bore, and then the 92mm, which is 416cc, and i want to go the 434 route because im doing it and i might as well do what i want, and ther really isnt much of a price diference
know of any places that will carry the 94mm 12:1 JE piston, its their high comp one, and i like it because i can still use 91 isntead of 97 or mixing race gas or anything like the wiseco kits
Call Kenz Cycle Tech in Mesa,AZ and see if he has a piston on the shelf. Google will help you find Kenz.
Kenz in Mesa (480) 962-1714
Have you tried any of the Z400Central sponsors? I'm sure SOMEONE must have that piston in stock.
Have you tried any of the Z400Central sponsors? I'm sure SOMEONE must have that piston in stock.
Duncan Racing or Sam Coe Racing in Santee, Kenney Drive
| QUOTE (SHOCKER @ Dec 11 2004, 09:19 AM) |
| Well im boring out my cylidner to 94mm from 90mm, and well i need to find a machine shop, hopefully one that does work on engines, and also does nikasiling, i was going to send my cylinder out to millenium tech, but we are planning on going out sometime after christmas, and in order to do that ther is no time to send my piston out and have them get it done and back to me, so i am looking for local places, im gonna cal duncan racing see if theydo it, and if not any recomended places, and then ill call this place in riverside called phat head racing, they have been recomended by someone, they have 35 years i believe under their belt, and seem to have a good price, so does anyone know of a place down here that could bore and re-nikasil my cylinder? |
Shocker,
Get in touch with Nils on the Central. I'm sure he could hook you up. Someone was saying there is a company that for an extra $75.00 will get your cylinder back to you in a week. Central is down but check the performance section when you get a chance.
| QUOTE (SHOCKER @ Dec 11 2004, 08:24 PM) |
| I called albe for recomendations adn they said the same, but racers toy store and all other machine shops are closed today , and the piston i need wont be in until about 1 week or so, and i need to send in the piston with the cylinder, so im getting mad, alba doesnt have the JE piston in stock now, well they dont have the 94mm which is 434cc, and the only ones they have in stock is stock bore, and then the 92mm, which is 416cc, and i want to go the 434 route because im doing it and i might as well do what i want, and ther really isnt much of a price diference know of any places that will carry the 94mm 12:1 JE piston, its their high comp one, and i like it because i can still use 91 isntead of 97 or mixing race gas or anything like the wiseco kits |
Once again get ahold of Nils (velocity111) on yfzcentral. He sells the CP pistons that are way better than the JE and I'm sure you could get it in less than a week.
Velocity racing
| QUOTE (Desertdogs @ Dec 13 2004, 10:52 AM) |
| Duncan Racing or Sam Coe Racing in Santee, Kenney Drive |
I considered duncan racing but havent called them, i just got home from school
im really trying to get ahold of friken racers toy store but no one is answering, there is one ring then an answering machine picks up and says enter the extension now or for hours press 1, etc.
can anyone givve me someoens extension to talk to or know of another way?
for the piston, im going to call JE directly in a few minutes since they are in hollywood, CA, then ill try T&T on exriders, and then ill go from there
Darnit je pistons closed at 5, ahh come one someoen has to be there, its 5:18, stupid punks, guess ill try someone else
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.