I got a Quadzilla And does anybody know if there is a way to test a stator? mine is not working right and I don't know how to check.

Yes they can be tested. I just went thru that with my Zilla.

I tested my own stocker for you. It was tested by Rick Stator service dept. recently. I don't have the spec ranges, just what I'm getting off the stator itself.
This is for stock stator.
black w/white stripe is ground for the stator or GND
GND to black w/red stripe=.386K* ohms. This is the source coil, you need that for spark.
GND to blue = 218 ohms. This is the pickup coil, also needed for spark.
GND to yellow/red stripe = 5.2 ohms. This is the lighting coil/coils.
*don't know why my meter went to the K range, but I'm pretty sure it's 386 ohms.

These are for Rick Stator(130 watt), from the RS service dept. over the phone.
GND to black w/red stripe= 350-400 ohms
GND to blue = 100-120 ohms
GND to yellow/red stripe = .5-.8 ohms as tested, no firgures from RS