cant get one till mid next week and i think im gonna be needing it for this weekend.

can someone help?

What kind of carb do you have? Mikuni, kehin?
Nevermind, according to the polaris site, you have a mikuni. Kawasakis, banshees, some hondas, etc all use mikuni carbs. Try one of those dealers for a mikuni 50 pilot.

thanks 24

No problem. I would also recommend taking a pilot with you when you go to get the 50. Make sure they match up.

yeah , i think im gonna pull it out and bring it with me. its just such a pain in the a55 to chane the jets on the predators

If you still need one I MIGHT have one...just depends on if I can find my stock carb or not lol...cuz its in there....and the carb is floating around my garage floor somewhere...

Worse case... Gilmore's carries a nice jet selection

Absolutely, take your 45 pilot with you .

Also while your at it..

Go to your Local NAPA auto Parts store. They carry screws and bolts and will have harderned hex head cap screws in metric sizes that will fit your carb bowl and slide cover. I got mine there and the total cost for it all was about $6.00.

The sizes you need are 4mm x 10mm, #81661 (Carb Bowl); 5mm x 12mm, #81664 (Slide Cover); and I also got several 4mm x 25mm, #82057, standard pan head phillips screws, for the carb to intake boot. the stock screws are crap.

thanks guys.

tres, i noticed that the screws suck, thanks for the sizes. I will pick em up.

got the jet i needed last night at North County Yamaha

and picked up the screws too. Thanks tres, those sizes you gave me made it much easier

are you ready to ride yet?

im gonna get it together tonight and get a little test ride in tomorrow at lunch...we shal see.