GlamisDunes.com > My New "monsta Mota"

WIDE LOAD

Jun 15 2005, 02:36 PM

I just wanted to share some photos of some of the pieces that are starting to show up for the new motor. KG is going to post them for me since I dont know what the hell I am doing in that arena. Thanks KG.

The name MONSTA MOTA comes from the gentlemen that is doing the build. He owns Quest Racing on the east coast and builds lots of PRO MOD motors. His east coast accent is very heavy and he always says "THAT THING'S A MONSTA". Great guy!

The valves you will see are titanium and I just recieved the connecting rods today from Oliver which are also titanium. This motor will have the same bob weight as a small block Winston Cup motor. I will see if I can get a photo of one of the rods to post. They are swweeeeet and weigh 68% less than the steel rods. I am starting to get jacked up just thinking about it. I hope you enjoy the photos.

TroyB

Jun 15 2005, 02:44 PM

Come on KG whats taking so long??

WIDE LOAD

Jun 15 2005, 02:51 PM

QUOTE(TroyB @ Jun 15 2005, 02:44 PM)

Come on KG whats taking so long??

[right][snapback]1026365[/snapback][/right]

He is working on them as we speak.

Sandzilla

Jun 15 2005, 03:02 PM

Oh this is gonna be good!

... Now get ta-posting!

QUOTE(WIDE LOAD @ Jun 15 2005, 02:36 PM)

I just wanted to share some photos of some of the pieces that are starting to show up for the new motor. KG is going to post them for me since I dont know what the hell I am doing in that arena. Thanks KG.

The name MONSTA MOTA comes from the gentlemen that is doing the build. He owns Quest Racing on the east coast and builds lots of PRO MOD motors. His east coast accent is very heavy and he always says "THAT THING'S A MONSTA". Great guy!

The valves you will see are titanium and I just recieved the connecting rods today from Oliver which are also titanium. This motor will have the same bob weight as a small block Winston Cup motor. I will see if I can get a photo of one of the rods to post. They are swweeeeet and weigh 68% less than the steel rods. I am starting to get jacked up just thinking about it. I hope you enjoy the photos.

[right][snapback]1026332[/snapback][/right]

KingGlamis

Jun 15 2005, 03:14 PM

KingGlamis

Jun 15 2005, 03:15 PM

KingGlamis

Jun 15 2005, 03:16 PM

KingGlamis

Jun 15 2005, 03:16 PM

KingGlamis

Jun 15 2005, 03:17 PM

KingGlamis

Jun 15 2005, 03:18 PM

This is the last one that Kevin sent me. Looks great Kevin, you'll have to give me a ride when it is finished.

Josh @ DanZio

Jun 15 2005, 03:47 PM

How about some specs.

Sandzilla

Jun 15 2005, 04:01 PM

Billet pistons, roller cam bearing, titanium valves...Nice.

From looking at the piston, it looks like it's gonna be some kind of long rod or strocker motor???.. The top ring is far on the slug too... Blower, turbo???...Details man, details!!!

Zilla

QUOTE(KingGlamis @ Jun 15 2005, 03:18 PM)

This is the last one that Kevin sent me. Looks great Kevin, you'll have to give me a ride when it is finished.
[right][snapback]1026429[/snapback][/right]

Kevin

Jun 15 2005, 05:00 PM

cp makes some nice pistons. yeah was gonna say about the distance to the top ring, nitrous motor or alot of boost from a blower or turbo, or both!

KingGlamis

Jun 15 2005, 05:53 PM

Kevin (Wide Load) told me it's going to be a 9:1 396BB with the rev limiter set to 5500. Oh, and a 390cfm Holley.

Did I get it right Kevin?

onanysunday

Jun 15 2005, 06:04 PM

Nothin like shiny new engine parts

Jeffinrivercity

Jun 15 2005, 06:29 PM

QUOTE(Kevin @ Jun 15 2005, 05:00 PM)

cp makes some nice pistons. yeah was gonna say about the distance to the top ring, nitrous motor or alot of boost from a blower or turbo, or both!
[right][snapback]1026552[/snapback][/right]

That's whhat I was thinkin..it could handle some NOS

WIDE LOAD

Jun 15 2005, 09:56 PM

QUOTE(KingGlamis @ Jun 15 2005, 05:53 PM)

Kevin (Wide Load) told me it's going to be a 9:1 396BB with the rev limiter set to 5500. Oh, and a 390cfm Holley.

Did I get it right Kevin?

[right][snapback]1026610[/snapback][/right]

That's what the engine builder told me. He said it should put down around 300HP to the rear wheels.

Sorry Crowdog, I just couldn't resist.

Actually, it's going to be a 588 cubic inch roller motor. It will be dry sumped and use a pump made in Sweden that creates enough positive vacuum that you dont even have to vent the engine. We will be using the BIG STUFF III fuel injection system which uses a six wire O2 sensor wideband system. The heads may be the trickest pieces. They are twelve degree PRO STOCK heads made by Reher Morrison. I'll fill you in on some more pieces as soon as I receive them.

KingGlamis

Jun 15 2005, 10:13 PM

Yep, I tend to believe the 300rwhp claim. Or at least 295.

Josh @ DanZio

Jun 16 2005, 01:04 PM

Sounds expensive. I'm gonna guess $50,000+ for the engine.

luvdunin

Jun 16 2005, 01:28 PM

You did this just to show up Big3tx, didn't you??

WIDE LOAD

Jun 16 2005, 03:49 PM

QUOTE(Mr. LV @ Jun 16 2005, 01:04 PM)

Sounds expensive. I'm gonna guess $50,000+ for the engine.
[right][snapback]1028090[/snapback][/right]

Your pretty damn good with that calculater. Sounds like you have been through this once or twice. My wife thinks I'm nuts.

Big*T*3x

Jun 16 2005, 04:08 PM

QUOTE(luvdunin @ Jun 16 2005, 02:28 PM)

You did this just to show up Big3tx, didn't you??

[right][snapback]1028190[/snapback][/right]

Wideload is in a league of his own. He doesnt need my help, his egine will probably be double the hp of my 450hp engine and maybey even more. My guess would be 1000 to 1100 hp.

Very nice Wideload and I cant wait to see that beast in Glamis

WIDE LOAD

Jun 16 2005, 05:03 PM

QUOTE(bigt3x @ Jun 16 2005, 04:08 PM)

QUOTE(luvdunin @ Jun 16 2005, 02:28 PM)

You did this just to show up Big3tx, didn't you??

[right][snapback]1028190[/snapback][/right]

Wideload is in a league of his own. He doesnt need my help, his egine will probably be double the hp of my 450hp engine and maybey even more. My guess would be 1000 to 1100 hp.

Very nice Wideload and I cant wait to see that beast in Glamis

[right][snapback]1028672[/snapback][/right]

Thanks, I cant wait to get it done. I think about it constantly. It would be fun to hook up at Glamis when everyone has their projects done and go for a good ride. How is your project coming along? What is the completion date? It will be fun to see it when your done. Later

Big*T*3x

Jun 16 2005, 06:51 PM

My car will be done in October. My buddy is building a Racer also and it is out of the jig and they are doing the aluminum right now.

onanysunday

Jun 16 2005, 07:03 PM

Sounds like some absolutely incredible cars with that much HP. Keep the pics coming.

Josh @ DanZio

Jun 16 2005, 07:42 PM

QUOTE(WIDE LOAD @ Jun 16 2005, 03:49 PM)

QUOTE(Mr. LV @ Jun 16 2005, 01:04 PM)

Sounds expensive. I'm gonna guess $50,000+ for the engine.
[right][snapback]1028090[/snapback][/right]

Your pretty damn good with that calculater. Sounds like you have been through this once or twice. My wife thinks I'm nuts.

[right][snapback]1028632[/snapback][/right]

Titanium rods aren't cheap. I figure if you're springing for those, that everything else is top dollar as well.

WIDE LOAD

Jun 16 2005, 09:43 PM

QUOTE(bigt3x @ Jun 16 2005, 06:51 PM)

My car will be done in October. My buddy is building a Racer also and it is out of the jig and they are doing the aluminum right now.
[right][snapback]1028878[/snapback][/right]

That must be Dirtracer? He is doing the digital dash as I remember. I am either one or two cars behind him. It's going to be a great season this year!

WIDE LOAD

Jun 16 2005, 09:49 PM

QUOTE(Mr. LV @ Jun 16 2005, 07:42 PM)

QUOTE(WIDE LOAD @ Jun 16 2005, 03:49 PM)

QUOTE(Mr. LV @ Jun 16 2005, 01:04 PM)

Sounds expensive. I'm gonna guess $50,000+ for the engine.
[right][snapback]1028090[/snapback][/right]

Your pretty damn good with that calculater. Sounds like you have been through this once or twice. My wife thinks I'm nuts.

[right][snapback]1028632[/snapback][/right]

Titanium rods aren't cheap. I figure if you're springing for those, that everything else is top dollar as well.

[right][snapback]1028939[/snapback][/right]

LV, I'm afraid I went for the throat on this one. I kind of turned the engine builder loose to do what he thought was best. It has been a real education for me. I thought I wanted a Hogan intake until he talked me into a Wilson. I was completely unaware of who Wilson was up to then. Now my heads are at there shop getting an intake built to match them. Those guys do incredible work. As nice of an intake as I have ever seen.

gritty

Jun 17 2005, 10:19 AM

Whatever happened to the monster motor that was in this car after it came out of Revenge?

Big*T*3x

Jun 17 2005, 11:29 AM

QUOTE(WIDE LOAD @ Jun 16 2005, 10:43 PM)

QUOTE(bigt3x @ Jun 16 2005, 06:51 PM)

My car will be done in October. My buddy is building a Racer also and it is out of the jig and they are doing the aluminum right now.
[right][snapback]1028878[/snapback][/right]

That must be Dirtracer? He is doing the digital dash as I remember. I am either one or two cars behind him. It's going to be a great season this year!

[right][snapback]1029160[/snapback][/right]

Dirtracer is my buddy now I just met him last Saturday , but I was talking about The owner of Sunrise Ford (my boss) his should be done in a couple of weeks.
Small block Chevy about 630 hp

WIDE LOAD

Jun 18 2005, 06:46 AM

QUOTE(gritty @ Jun 17 2005, 10:19 AM)

Whatever happened to the monster motor that was in this car after it came out of Revenge?
[right][snapback]1029905[/snapback][/right]

Hey gritty, I still have the blown two seater that revenge built for me. It is a blast. I am taking it to Utah over the 4th of July to run up that Big Sand Mountain a few times. It is supposed to be 1100 feet tall and it is pretty steep. This new engine is for a new Racer Sandcar that Dale Dondale is putting together for me. It is a four seater. I have four sons and one daughter-in-law and they all love to ride. I needed some more seats.

gritty

Jun 18 2005, 08:42 AM

Ohhh, I must have missed that somewhere. That Revenge car you have is something else. Can't wait to see your new car. Those Racer cars are definitely NICE! Good luck with the build, and keep up the pics!

JBtech

Jul 4 2005, 03:11 PM

SPY PHOTOS's from RACER

JB

Big*T*3x

Jul 4 2005, 03:16 PM

QUOTE(john@RacerSandCars @ Jul 4 2005, 04:11 PM)

SPY PHOTOS's from RACER

JB
[right][snapback]1053645[/snapback][/right]

What up John. Is that DB's car?

Thomas

JBtech

Jul 4 2005, 05:32 PM

no his got kicked to the rear

JK

JB

Josh @ DanZio

Jul 5 2005, 08:06 AM

QUOTE(john@RacerSandCars @ Jul 4 2005, 03:11 PM)

SPY PHOTOS's from RACER

JB
[right][snapback]1053645[/snapback][/right]

Tim

Jul 5 2005, 12:29 PM

John:

Is that my car?

thanks, Tim in Arizona

JBtech

Jul 6 2005, 07:07 PM

no it's Mikes car

everyones cars are doing very well

JB

aquaticwonder

Jul 8 2005, 05:39 PM

thats beautiful aluminum work

WIDE LOAD

Aug 9 2005, 07:16 PM

New photo's should be posted tomarrow. The heads are AWESOME!!!!!!
The car is getting the aluminum done as we speak. Can't wait.

donparscale

Aug 9 2005, 08:33 PM

QUOTE(john@RacerSandCars @ Jul 4 2005, 03:11 PM)

SPY PHOTOS's from RACER

JB
[right][snapback]1053645[/snapback][/right]

Did Jeff do the alum. work? It is awsum.
LATER DON~~~

KingGlamis

Aug 9 2005, 08:48 PM

QUOTE(john@RacerSandCars @ Jul 4 2005, 04:11 PM)

SPY PHOTOS's from RACER

JB
[right][snapback]1053645[/snapback][/right]

That car looks really cool. Great job guys!

Big*T*3x

Aug 9 2005, 09:15 PM

QUOTE(WIDE LOAD @ Aug 9 2005, 08:16 PM)

New photo's should be posted tomarrow. The heads are AWESOME!!!!!!
The car is getting the aluminum done as we speak. Can't wait.

[right][snapback]1109015[/snapback][/right]

When did your car go to aluminum? Mine is right behind yours

WIDE LOAD

Aug 9 2005, 09:30 PM

QUOTE(bigt3x @ Aug 9 2005, 09:15 PM)

QUOTE(WIDE LOAD @ Aug 9 2005, 08:16 PM)

New photo's should be posted tomarrow. The heads are AWESOME!!!!!!
The car is getting the aluminum done as we speak. Can't wait.

[right][snapback]1109015[/snapback][/right]

When did your car go to aluminum? Mine is right behind yours

[right][snapback]1109174[/snapback][/right]

Aluminum started this week. I am going down next week to finalize any last details. Dry sump tank was shipped today to be mounted ASAP. Just waiting on the intake from Wilson to complete the motor. Motor should be done in next two weeks, dynoed then shipped.

mike

Aug 9 2005, 09:30 PM

cant wait to see all these monsters

WIDE LOAD

Aug 9 2005, 09:40 PM

QUOTE(mike @ Aug 9 2005, 09:30 PM)

cant wait to see all these monsters

[right][snapback]1109191[/snapback][/right]

What do you mean by monsters? Mine is pretty much stock!

Big*T*3x

Aug 9 2005, 10:29 PM

QUOTE(WIDE LOAD @ Aug 9 2005, 10:40 PM)

QUOTE(mike @ Aug 9 2005, 09:30 PM)

cant wait to see all these monsters

[right][snapback]1109191[/snapback][/right]

What do you mean by monsters? Mine is pretty much stock!

[right][snapback]1109197[/snapback][/right]

Im hoping for 450hp

no monster here

KingGlamis

Aug 10 2005, 10:35 AM

Kevin sent me some more pics to post up for him. Here is the first...

KingGlamis

Aug 10 2005, 10:36 AM

Another pic...

KingGlamis

Aug 10 2005, 10:37 AM

Another...