I just put a hydraulic pedal/slave on. I bled the system everything was working except the slave wouldn't return all the way, had to pull the arm back by hand about 1/4in more. I started it up to test, pulled in the clutch it wouldn't go into any gear. let off the clutch pushed it back the pedal didn't go very far. Shut off the engine went back to look, the arm was stuck all the way forward. I took the slave off its fine, the arm is jammed. Took the spring off still jammed. Any ideas on what happened, it worked fine with the old cable? What would make it jam up?

Sounds like the through out bearing fell off. Same thing happened to my friend last weekend.

I just broke it loose and now it doesn't feel right. Looks like yet another engine pullout.

yup, betting one of the clips popped off or something