I am looking at turboing my car this summer and would like to see some pics on how your turbo's are plumbed for V6 and V8's. I want to get some ideas to build a clean looking setup. Haven't decided if i'm going single or twin yet. Also does anyone run an intercooler on their car?

I have a shortstar now.



Edited for fat finger typing...

Easiest way is to make shorty upside down headers and mount the turbos on top of the header. To me with a V-6 it would be easier to use two small turbos than one larger one and have all the problems with the exhaust piping.
DON~~~

Dumped the wastegate back into the exhaust to keep quieter and dont have to worry about sand getting in. (Not that this is really a problem. Most cars dump into fresh air) Also dumped the BOV back into the intake box. No filter to worry about and helps noise a little. Be sure to get adequate and plenty of clean cool air to the motor. A 90 degree bend is equal to 4 foot of restriction.
My whole thread

v6 6 inda 1

Here are a couple of my Honda V6 setup pics. Not real fond of the dragster scoop on the intercooler, but it will get me by until I can have another one made.

[attachmentid=66356]
[attachmentid=66357]
[attachmentid=66358]

SAND CARS UNLIMITED,,,,,

Here's one
[attachmentid=66454]

Thanks guys.. Pics look good. Keep em coming.

Way cool! Good luck with the upgrade! Are you coming to Zilla's party to tell us all about it?

I was planning on it untill I found out my wife made other plans One of these times I will make it to something.

4.3 v-6

here is a oic of some headers i made awile ago
brandon

Godzilla

Godzilla