I have a 96 banshee with pro circuit pipes, boyesen reeds, reed spacers, trinity stage 2 porting and stage 4 head,boost bottle and clamp on k&n's with a 320 main. My carbs keep sticking when theres moisture in the air. It happened on presidents day at glamis after it rained and it just happened to me at pismo last weekend. This happened before i was running K&N's when i had a pro flow foam filter. I have cleaned them multiple times and it works for about 2-3 hours before one of them sticks again :evil: :evil: . My carbs are stock except for the main jet. Any Help? Please??!!! :? :? :?

This might be a bit of a long shot but, have you checked you throttle cables? Sounds like they could be binding up a bit.

CHECK TO SEE IF THE THROTTLE CABLE IS BOKEN AT TUBE WERE IT GOES FROM ONE CABLE TO TWO. I HAD THIS PROBLEM ONCE AND THATS WHAT HAPPENED TO ME.

sounds like a issue with the cables to me too.

Are you using a twist or thumb throttle?

Its a stock thumb with the tors. I'll look at my cables tomorrow. Thanks guys.

clean the slides while you are at it

Get rid of the TORS .might not be your problem but it will be a problem soon enough