Hey anyone here know if its possible? might are all outta wack, they most point to far up, I Looked but i didnt see anything to move or adjust.
do i have to remove the front plastics?

You are in luck! I have the anwsers... :dis:

I have this yellow Z400 that I had bent the fender bracket on, well last night I noticed when I turned the bike on, for the first time since it happened, that there was more damage than I had originally expected. :black:
The headlights were pointing all screwy too! So I pulled the plastic off and found no adjustments.
I was dumbfounded on what I was going to do, since half the brackets that mounted the headlight were tweaked, but it got worse, those brakets were welded to the frame. :rant:
So I got out my thinking cap (3 lb. sledge hammer) and went to work.
Within 20 or 30 mins or so, had the cops knocking at my door asking what all the noise was...
I explained my situation in detail, they felt very very sorry for me, so they let me go with a warning.
I guess what I'm trying to say is your screwed... Hope the bike at least belongs to you... :shocked:

QUOTE

You are in luck! I have the anwsers... :dis:   I have this yellow Z400 that I had bent the fender bracket on, well last night I noticed when I turned the bike on, for the first time since it happened, that there was more damage than I had originally expected.  :black:   The headlights were pointing all screwy too! So I pulled the plastic off and found no adjustments.   I was dumbfounded on what I was going to do, since half the brackets that mounted the headlight were tweaked, but it got worse, those brakets were welded to the frame.  :rant:   So I got out my thinking cap (3 lb. sledge hammer) and went to work. Within 20 or 30 mins or so, had the cops knocking at my door asking what all the noise was... I explained my situation in detail, they felt very very sorry for me, so they let me go with a warning.   I guess what I'm trying to say is your screwed... Hope the bike at least belongs to you... :shocked:

>:< >:< >:<

Damn, well the lights are not that bad im mean they just need to be moved down a little.
but yea its my z so,
thanks anyways
maybe i can bend those brackets down or something,.

If you put smaller tires in the front and bigger tires in the back, it might work.. Just kidding.. mabe on the mount you can insert a washer or something to angle them downwards..

Get Fullbore racing plastics and some billet lights.

theres a single screw and you can get the lights to point right to the ground or in the sky.
its on the left side at the bottom of the light.10mm screw.