Sandcar / Off-Road Parts
412 topics in this forum
-
- 1 follower
- 24 replies
- 2.5k views
Mine broke a ring and has scored the cyl.
Last reply by ChasingSand, -
- 22 replies
- 1.6k views
Weddle 9” single disc clutch. Pressure plate, disc and flywheel with two hours of use.$650.00 OBO plus shipping. Located in So Cal.
Last reply by Sandkist, -
- 19 replies
- 2.8k views
Bunch of parts left over from my cars re-working and some spares i had 31x34" radiator out of my car. was used on a honda v6 setup and NEVER gave overheating issues no matter how hard i drove it in hot weather. tried like hell to keep it in the re-working of the back end but jsut wasnt going to work like i wanted. Comes with fans and shroud. $200 EMPI shifter with weld on base. No issues, just switched to a Jamar X shifter with the new trans. shift rod doesnt come with. $30 Pair of 22" long chromoly axles and 23" long chromoly axles. For 930 CV's, 28 spline. 23" are used and marked for side. 22" has one brand new and other is used …
Last reply by chevy1925, -
- 17 replies
- 2.5k views
So I have this DOHC Subi engine, EJ25, with turbo, intercooler, computer, harness, and stage 3 clutch. I am trying to see what it's worth. Called a few places but had no luck.. as in no calls were ever returned. I do want to sell it. just need to know what is reasonable.
Last reply by John@Outfront, -
- 17 replies
- 2.6k views
Pro AM shifter in excellent condition. Sold
Last reply by Markcastaneda91, -
- 1 follower
- 16 replies
- 2.7k views
Autometer gauges with billet bezels $400 Beard seats x2 $500 Padla trak 1300plus on 15x12 Douglas wheels $350 LS Headers $200 Located in queen creek AZ
Last reply by matt86m, -
- 3 followers
- 15 replies
- 3.2k views
Figured I would start a new tire thread since I can now get all tires cut again. I only sell STU and Sport Tires of America brand tires. A lot of tires are still on back order through STU but if you have any questions on tires, need pricing, or want to get an order in please leave a comment, PM me, or call/text. Make sure you mention GlamisDunes.com to get your GD pricing. -Justin MARS Sand Sports 951-239-2872
Last reply by Mac, -
- 15 replies
- 1.4k views
regular offset.
Last reply by Jorge, -
- 1 follower
- 13 replies
- 1.9k views
The whole thing for $5k. This includes motor, adapter plate, clutch, fuel pump, turbo, wastegate, exhaust, water reservoir. stock ecu, wire harness, power steering pump, BOV, motor mounts. still in car can, hear run. the customer bought this car and just wants a 600HP Subaru in it We assume this is a stock honda motor We assume it runs on race gas i dont have any HP numbers and its not been on my dyno items not included: intercooler (its in his wing), radiator and overflow bottle will remove motor once a deal is made for no charge
Last reply by John@Outfront, -
- 12 replies
- 762 views
Four Beard buckets seats for sale. Two front are plus 1" wide w/ back pouches. Rears are standard-width shorties for more passenger legroom. Sold w/o belts and prefer to be sold as a set of four. I will post better pics on monday ( pics aren't very clear). $900 for the four.
Last reply by Ganzo, -
- 12 replies
- 2k views
Used CBM adapter plate (#10724) Kennedy Stage 3 single disc pressure plate (228mm or 9") Kennedy 6 disc clutch disc with for Albins, Fortin, PBS, Weddle 1-1/8" 26 Spline Kennedy flywheel (#8450) Hardware included All in good working order with low time. $550 Thanks! Scott 623-229-7395
Last reply by BoydCo, -
- 11 replies
- 506 views
Have 2 vision x hid lighs $40 4 axis bar mounts $20 1 set of billet clamp mirrors $ 40 1 pair of red Simpson clip in belts date code mar 2019 $25 2 Headset holders $20 in Redlands ca pick up only or will be in Glamis on the 25th-27th 909-559-9988
Last reply by chopshop, -
- 11 replies
- 777 views
Bell Qualifier plumbed/wired helmet in excellent condition. Wife has only worn twice and always stored in its bag/sock. Purchased new from Rugged Radio for $300. size-Small date-8/2020 price-$200 obo
Last reply by Dunerking, -
- 11 replies
- 1.4k views
Redline LS to VW/MD2D bell-housing adaptor plate. Threads for studs have Timesert inserts ($100 upgrade) making them considerably stronger than just threads in aluminum. New 10.9 grade studs. $125 plus shipping.
Last reply by Sandkist, -
- 1 follower
- 11 replies
- 452 views
I have some old tires I just pulled off, they hold air, but are chewed up and old. No plugs that I see. Free to a fellow duner. Located in Riverside.
Last reply by MPC, -
- 1 follower
- 10 replies
- 1.7k views
Anyone looking to add bypasses? These are in excellent shape and ready to install but I screwed up and bought the wrong size. I need 18" unfortunately. In San Diego. Shipping on your dime. $1,500
Last reply by Chingon619, -
- 10 replies
- 2.5k views
Early Mendeola 2D 091 4.86 Ring and Pinion, 1st, 2nd main shaft with associated gears 1.86 and 2.91 ratios and miscellaneous associated hardware, bearing and synchro Brand new never used. $2500 plus shipping
Last reply by Sandkist, -
- 10 replies
- 318 views
Looking for this particular lug nut hub cap. Car has 930 micro stubs and missing one. By chance does anyone have one laying about or know where I can pick one up?
Last reply by Poule43, -
- 10 replies
- 2k views
Used for about 30 minutes, and realized it was too small to shed the heat from a 6.7 PSD at 100% load... Includes 210* thermo switch. Holds 2 quarts and has a HD Spal fan integrated. In PHX. $600 Clicky
Last reply by Kraut_n_Rice, -
- 9 replies
- 929 views
$150 Cash / Located in Carlsbad I used Truck bed liner on the rims so they look great! 760-443-754 EIGHT Andy
Last reply by Mayday, -
- 9 replies
- 761 views
I have a set of Douglas bead lock wheels and sand tires. Powder coated Black with gray lock rings and a set of copper painted lock rings Fronts - 15x5.5 3.5” backspacing with sand tires unlimited 8.50 x 15’s. Only have about 6 trips on them, no leaks Rears - 15x12 2” backspacing I out a set of used dune sport 14.50’s to try out. They have slow leak, and have some cord showing in the inside, I would replace them. $1500
Last reply by Reddragon, -
- 9 replies
- 795 views
Any of you off road Hoarders have an old school Buggy Whip they wanna get rid of. Light on top does not have to work my base on mine is stripped out and I Forgot it in my trailer (I was gonna have Buggy Whip replace the base mount. If anyone has a spare and can loan it to me for my next trip December 12th.......till I can get mine redone......let me know
Last reply by Poule43, -
- 9 replies
- 1.8k views
Thinking about selling my 2004 Funco 2 seat Hustler. Just not using enough. I am the second owner since 2006. 460hp C and G. SOHC Subaru 2.5 with Garrett gt2860, Tial Wastegate,Turbosmart BOV, Hallman boost controller , all Teflon fuel lines a fittings. Roll over vent valve all an vent lines. Engine was opened up and inspected, retuned on the dyno by John at outfront motor sports. 110 fuel. timing belt was done two trips ago along with the tensioner and pulleys. Mendeola 2d with Funco nose cone. 3 trips since rebuild by Rancho. No internal parts needed replacement, all new bearings and seals. Funco did the r and r. 930 …
Last reply by onanysunday, -
- 1 follower
- 9 replies
- 1.8k views
Aeromotive fuel rails- 150$ Stock ls3 intake w/ 92mm throttle body- 300$ Rugged Vertex radio- 100$ Ls coil covers- 20$ Cnc pedals w’ 3/4 and 7/8 master- 100$ cnc turning brakes-50$ 2 rugged head sets-150$ for the pair gear one king king hubs w/brakes- 400$ not pictured.
Last reply by HTElectrical, -
- 8 replies
- 822 views
Last reply by Sandkid,