Sandcar / Off-Road Parts
412 topics in this forum
-
- 5 replies
- 746 views
Motor came from a salvage yard and is claimed to have 120K on it. It is the cleanest one I have ever got a hold of. It has the factory engine wire harness as well. At this point, stock condition, I can see it needs 3 sensors that got broken at some point. Price is $350.00. This price will change as time goes on and the motor is set up for a sand car. This will happen later in summer.
Last reply by ROBERT L, -
Jamar Pro X shifter. Black. Less than 1 season on it. $280. Honda J35A motor. Same model as the J35A5. Was a spare I kept around in case something happened to my motor. Motor only. No harness or ecu. Can throw in intake tubing for free. Also have 2 into 1 header and exhaust for it for extra $$$. $1,000 motor only. $1350 with exhaust. Kennedy 8” clutch, flywheel and stage 3 pressure plate. Comes with hardware. All in good working condition. $500. Will post pictures of everything soon when I get a chance.
Last reply by Sandnya, -
- 1 reply
- 400 views
I have 2 (or 3) Bosch p/n 0580254982 Fuel Pumps for sale (I have a 3rd in the trailer but can't confirm the p/n at the moment) In working order with -6 AN fitting on the outlet $60 each or both for $100 ($150 for all 3) Located in Torrance, CA but ship it on your dime. Mike (three one zero) three four four-2115
Last reply by Mike E, -
- 1 reply
- 356 views
For Sale - 11" x 11" plate cooler for transmission or oil. Has 9" electric fan and 1/2" NPT ports Was used as a trans cooler for an S4 but removed and now I just pump the fluid and don't run it through the cooler. Located in Torrance, CA would prefer not to ship this one $100 (AN caps not included) Mike (three one zero) three four four-2115
Last reply by Mike E, -
- 1 reply
- 497 views
I have a pair of Fox 14" coilover shocks, these are 2" emulsion shocks, 7/8 shaft with no reservoir. The springs are Eibach 350 over 450. These were purchased new in 2014 and have been installed on my V8 sand car since I bought them. They DO NOT leak and are presently filled with Fox oil and charged with nitrogen. The heims are tight and in good shape. 1 of the bodies has more threads than the other but it's never been an issue, I received them that way and never pursued exchanging them. They were just taken out of service in the last month and there is no reason they couldn't be put on a car and used right now. The valving is within a range or two of stock but they've de…
Last reply by KLC, -
- 1 reply
- 195 views
These came out of my buggy. The front covers are worn but the rears are decent. I have 1 brand new oem seat cover I will include, it just needs to be installed. I believe EMPI still sells the covers. I also have a set of 4 Crow harnesses, they are the padded 4" with single upper attachment behind the seat, anti-submarine crotch buckles also. Harnesses are in great shape, no freying or tears. I will not sell individually, as a set only. I am in Goodyear, Az. $400
Last reply by KLC, -
- 1 follower
- 2 replies
- 991 views
Mendeola MD4S E. Just picked up from rebuild, new ring and pinion, new 3rd gear, new bearings, seals etc… Dons Bus box did the work I have the paperwork. I put a turbo on the Honda and went to a 2D. This thing was always solid. Geared to dune in 3rd gear on sand sport 14.50-15 tires. 930 flanges. gearing: 5.14rp 3.44, 2.25, 1.71, 1.14 text or call 9165845513 thanks
Last reply by mc22, -
- 3 replies
- 507 views
Mefi 4B with harness for LS was on a LS2 tuned by CBM harness is in perfect shape, going to Holley setup, $1000 Jonathan 951-520-3002
Last reply by RPMsRUP, -
- 0 replies
- 499 views
8’ OG buggy whips with mounting brackets qty 2 lacarra steering wheel off funco im in riverside text me 714-458-6020
Last reply by CHRIS J, -
- 8 replies
- 610 views
Two Beard pads. Excellent condition with no rips tears or stains. $100 for both plus shipping. Located in So Cal.
Last reply by Tonyd, -
- 1 follower
- 2 replies
- 486 views
I bought a new (sat on a shelf for years) set of King 2.5x14 triple bypasses for my car and turns out I need 16s. I would trade for a set of 16s or sell these for $1500. Located in Michigan but will ship on your dime. These have never been ran, 37.25" eye to eye extended.
Last reply by moondog897, -
- 1 follower
- 2 replies
- 635 views
LS3 Redline Performance Harness & AEM Infinity Computer. Computer has a danzio LS3 tune on it. Only removed because we changed to a Life Racing computer. It is in perfect condition and includes everything you need to run your ls motor.
Last reply by Reece Pettersen, -
- 1 follower
- 1 reply
- 581 views
Up for sale is a light bar off my sandrail. Lights are in amazing shape. Lenses look like new. The bar has brackets welded on to support the Ballast. Quality bar in great shape. 39"mounting width. $700 OBO, Matthew 562-500-4977
Last reply by JM PRO, -
- 1 follower
- 0 replies
- 518 views
Tires are older and usable. No holes or patches. $750 for the pair Located in Kansas. Could bring them to Little Sahara Oklahoma in April or St. Anthony's Idaho in June or Glamis in December 2023.
Last reply by GeneralG, -
- 4 replies
- 662 views
All stuff off my motor when I added a supercharger. All stock. $200 obo. I will be on Pad 5 this weekend. Or can ship on your dime. 480-231-6386
Last reply by lincster, -
- 1 follower
- 7 replies
- 1.7k views
I have a hood and dash for a Sand Sport. I have a ultra lite and apparently they are not the same width at the A pillar. Dash has not been cut either, so you can do what you like. $1200.00 for both. I am in Lake Havasu.
Last reply by ChasingSand, -
- 1 reply
- 405 views
PCI Race Radios Intercom $150 Rugged Race radio car to car $200 ICom Radio car to car $200 RzR mounting brackets $25 each All have been tested, powered on and working. You will need power cables with the correct connector on all. Will ship, you pay for shipping. **Rugged intercom has been sold**
Last reply by GeneralG, -
- 1 reply
- 354 views
Bought this for my buggy and never installed it. New sxs has a pump so I no longer need it. All brand new. Pumper, weld on mount, original mount(not pictured), a new 6ft hose, new 3 ft hose, and a rubber plug for using it solo. $200 east county San Diego.
Last reply by xtracrispy, -
- 2 replies
- 517 views
Douglas 15x5.5 beadlocks perfect shape$300 Jonathan 951-520-3002
Last reply by RPMsRUP, -
- 1 follower
- 13 replies
- 1.8k views
The whole thing for $5k. This includes motor, adapter plate, clutch, fuel pump, turbo, wastegate, exhaust, water reservoir. stock ecu, wire harness, power steering pump, BOV, motor mounts. still in car can, hear run. the customer bought this car and just wants a 600HP Subaru in it We assume this is a stock honda motor We assume it runs on race gas i dont have any HP numbers and its not been on my dyno items not included: intercooler (its in his wing), radiator and overflow bottle will remove motor once a deal is made for no charge
Last reply by John@Outfront, -
- 5 replies
- 1.1k views
I am selling my Turbo Subaru. It was rebuilt by the previous owner who is a professional engine builder and came out of his sandcar. It comes with the ECU and harness, HKS boost controller, intercooler, intercooler scoop, Outfront Motorsports exhaust and reinforced bottom oil pan. Also comes with a Kennedy Engineered Products engine adapter. Flywheel is for a 228mm clutch. It is a closed deck block, CP pistons, and I think Carriilo rods. Comes with most everything in the pictures (I did not take a picture of the harness). I am keeping the clutch and pressure plate. Ran good when I pulled it out to service the transmission. I am only selling because I am putting an LS …
Last reply by raspadoo, -
- 1 reply
- 774 views
I bought this to modify and fit my car, going in a different direction, I paid $300 for it would like that out of it $300 obo Jonathan 951-520-3002
Last reply by RPMsRUP, -
- 4 replies
- 765 views
MomoCorse steering wheel 350MM size, leather, Does not include a center cap as I have a gear selector on my car. Only reason selling is I prefer the Suede/ D-shape steering wheels. Asking 150$ OBO (714) 321 0748
Last reply by Banshee380, -
- 1 follower
- 2 replies
- 786 views
Sand Tires Unlimited DuneSport 14.50x17 #2 paddle tires with new 6x135mm lug wheels. Trade for STU Sand Blaster 36 #2 paddles / Sand Master 35.5 OR sell for $1500. Date codes are 2016. Tires are in great condition, very light use. Possible to transport/ delivery to Glamis Christmas/ New Years week. Funco, Tatum, S&S, Sand Tires
Last reply by GeneralG, -
- 3 replies
- 435 views
Like title. Wheels and tires. Tires and in a used condition. No chunks and one will hold air only for about 7 to 8 days before you need to refill. The other holds air. Wheels are in great shape and only need polish if so desired. Also, they are 14mm lug holes. $ 550.00
Last reply by richard h,