ATC's and 70's
Buy / Sell your ATC and '70
30 topics in this forum
-
- 1 follower
- 20 replies
- 5.5k views
READY FOR that ATC 70 Got tired of not being able to find my favorite 70 grab bar anymore so we made some OG Style Grab Bars / Aluminum $130 for GD.Com peeps including shipping in the contenintal USA /These are 100% made in the USA ! these are AWESOME / Look awesome ESPECIALLY with the Wikid 250r / A+ fenders. They are 1 inch narrowrer than the old prm and look 100% proportional to the atc 70.....Local pu in so cal is possible / Also Delivery to Glamis....saves 10 bucks Pic with Carbon fiber fenders are Maier Pic with Green Fenders are oem A+ Pic with RED fenders are OEM PIC with the white are WIKID IF YOU HAVE FIBERGLASS OEM STYLE YOU WILL HAVE TO TRIM THE FEN…
Last reply by Poule43, -
- 17 replies
- 2.8k views
Came up with this idea over 10 years ago with @matt86m and @Stugots while eating chicken wings at H(.)(.)TERS one fine Tuesday afternoon in Orange County / I drew it out on a napkin and got all the stuff to do it.....well.....my buddy moved shops and all the parts were lost in the shuffle...... (I was bummed but never took the time to do it all over again....Project was DEAD.......) I often thought about doing it again but with the price of parts and time.....It never happened/ THEN...................... My buddy Dave calls me a couple months ago and says he found a bunch of chopped 70 parts and a plasma cut out frame....I hauld AZZ to his shop and wala......…
Last reply by Poule43, -
- 2 followers
- 11 replies
- 2.5k views
OK, since you can NEVER have too many I have decided to do a build that I have been collecting parts for started this weekend. Wife is away in Sweden spending sme time with her sick dad and I ham here on the homefront with the kids holding down the fort...Besides all the regular CHAOS with lacrosse, work, meals, laundry, workouts, ccd, chores, broken plumbing lines, house fixes, pruging uneeded stuff,.....etc......I thought this would be a bit of positive energy.........Soo here goes 3inch stretched Blinged out Gold frame with @Stugots floor glitter and burried clearcoat Sparkles....Looks Incredible Harley Headlight and Custom Bars Black 10 inch frot whee…
Last reply by Crusty, -
- 4 replies
- 2k views
Stock Honda 1978 ATC70 - Clear Title and Current Registration in hand. Only non-OEM item is a Cobra Muffler, it is throaty pipe, but not obnoxious and a UNI Pod Foam Air Filter on the carb, its already been jetted to run that way. I have the Stock OEM Airbox to give you. It runs fine, has sat for 2 years, needs a carb clean (Carb is 2 years old). This is the ATC my kids all rode, learned to ride, bought it before they were born ATC. Maybe now its time for your family, we had it 20 years, looks the same....a stock ATC Honda that does what Honda's do... *** GD.com Price is $1,400. *** Picture is a few months ago, moving it …
Last reply by Crusty, -
- 9 replies
- 1.9k views
Custom ATC 70 Ammo cans with Paracorded handles / Great Gifts!!!!! 1973 Can Orange / 1983 Christmas Special Blue / 1985 Red $45 Each / Call Andy 760-443-754 EIGHT
Last reply by Poule43, -
1985 Atc70
by Pbuggy- 10 replies
- 1.9k views
1985, Atc70 all original,runs good,1,800.$ located in Mohave valley az, John 909-322-3651
Last reply by jailbird141, -
- 5 replies
- 1.8k views
Custom ATC70, made into a "Rat Rod" style chopper. SSR 110cc motor New gas tank (Red, old one in picture) Custom Suicide Shifter Green Sticker and Pink all current Some build pics are from the old GD Server. Let me know if interested via PM *** GD.com Price is $1,200. ***
Last reply by Crusty, -
70 for sale
by Kevin- 1 follower
- 15 replies
- 1.7k views
Just drug this outta storage, picked up a decade ago and haven’t done anything with it. Don’t know what year it is, it’s got maier plastics and tank frames been painted grey as have wheels. Located in lake Havasu Arizona. Asking $1500 update.. it runs carb was gunked up
Last reply by Stugots, -
- 25 replies
- 1.5k views
Decided to try to part with my 250r. Bought it a couple years ago during Covid for a premium, rode it twice and had engine troubles(overheated). Took it partially apart to check the head gasket and it needs an engine rebuild. Sat on it for a while hoping I’d have the time and money to rebuild but I’m not sure when that time will be. What I know: it’s complete, but apart. Has a newer thrill seekers seat cover, I polished up the tank when I got it (was white and faded), rear fenders were cracked so I cut them. Has a DuraBlue heavy duty axle, new (2 rides) x ring chain and sprockets, forks have new seals and boots, case saver bolt holes are cracked, put an UPP poly case…
Last reply by Sausage450r, -
- 5 replies
- 1.4k views
Sold off my San Diego Charger bike that I had built years ago (2021 SUCKED!!!!) . Saved all the Custom pieces soo I could build it again,.....BOOM !! Back better than Ever. I added wheel spacers / Aluminum one off beadlocks Sterdy wheels / Black Sterdy Billet / Sterdy Pipe / Sterdy 125 Lifan Pull Start Conversion motor / ProTaper Bars Everything Powdercoated / Leigh Brunskill Shed Built Fab Trailer Hitch / Sterdy Aluminium back frame plate / OG headlight / Custom tabbed light brackets welded on the forks b4 powdercoat / Pro Weld Custom # Plate that will have a trailer hitch Charger Emblem on it / ASV brake lever!!!! Couple little things to add and it will be DONE!!!!…
Last reply by Poule43, -
- 1 reply
- 1.4k views
Up for grabs is a COMPLETE set of wheels and tires for the ATC 70 powdercoated Blue with 2 new tires and 1 OEM Oshatsu (these sell for over 100 each in this condition) for the front. They look great with the beadlock trim rings (made by @O Soto Gari years ago!!!! I can also swap out the front Oshatsu for a Cheng shin if you would rather have all CS tires $315 takes them / Can deliver to Glamis ......... Time to add some Bling to your Call Andy 760-443-754 EIGHT
Last reply by Poule43, -
- 4 replies
- 1.3k views
1985 Honda atc 70, Piranha 140 electric start, new lithium battery, Loco front forks, OMF billet wheels, LED front and tail lights, Honda 400 start stop controls on bars, Pink and Reg in hand $5500 Jonathan 951-520-3002
Last reply by RPMsRUP, -
Nevemind. I'm keeping it. Stock engine. From an '80. 3 speed. Stopped running on me. I belive an electric/points issue. What you see is what you get. $40. Located in Julian 92036
Last reply by Bansh88, -
-
- 3 replies
- 1.2k views
Here is the latest of the Trailers for our Ammo Cans and Grab Bars!!!!! It came out SWEET. Gonna powdercoat it after the ATC invasion this weekend in Glamis!!!! we are gonna paracord all the handles and skin the inside walls instead of the flags / it was a lot of work but it came out beautiful! Happy New Year Peeps!!!!
Last reply by Poule43, -
- 1 follower
- 2 replies
- 1.2k views
1986 Honda Trx70. In overall excellent condition for being 36 yrs old. Low usage. New tires, fuel Lines and filters. Its mostly original Including the original tool kit and manual. No cracks in the original plastic. Pink slip in my name In hand. Current registration and green sticker. $3200. Located in Tehachapi Ca
Last reply by Kofire, -
Anyone have an extra frame ? been putting away parts the last few years and decided to build a custom Flat Track 70.....I need a beater frame to cut up. It will be extended 3 inches forward and 3 inches in the rear. If anyone has an old frame they want to get rid of let me know. here is the race from last year!
Last reply by Twigster, -
-
- 2 replies
- 1k views
Anyone out there have any axels they wanna get rid of....I am building a cool ATC 70 Q (BBQ) atc 70. I am in need of TWO stock atc 70 axels. Let me know Andy
Last reply by Greengo, -
- 1 follower
- 1 reply
- 954 views
EDIT: found a frame and axle on ebay, let the build begin! 🤙
Last reply by Poule43, -
- 10 replies
- 882 views
82 Honda 110. I have owned it since about 87. Used off and on but has mostly sat majority of its life. After market carb(stock carb I could not get it to come back to idle quickly, would hesitate for a few seconds then settle down) I do have original carb still. New seat cover. Tires in great shape. Plastics all there but has some cracks. Runs very good, reg current and have title. Located in San Diego. No hassle price of $1000. If it does not sell for that I will store it and use it occasionally for another 30 years Rob. 619-971-2621 IMG_0271.mov
Last reply by Crusty, -
- 1 reply
- 762 views
1984 Honda ATC70 $3000 Corona ca -Piranha 140cc E start motor swap -mukuni VM26 carb - pro taper bars, ODI grips. -new seat, new plastics. - Spanglers shifter, pegs, heel guards, rear brake kit, hidden ignition and light switch, light kit. - frame was powder coated black. -all new bearings, chain, sprockets, thumb throttle, throttle cable etc. - bike is in great shape. All the work was done in 2021. It’s a blast to ride and super fast. Great bike for cruising around camp. Bike is currently registered and I have the pink slip. Not common for these old bikes. It was a hassle to get the pink and registration.
Last reply by Schnitzel, -
- 4 replies
- 760 views
I have an ATC to sell. 88 Kit installed, New Chain, Rear Axle, New rims and tires. Pull start. Runs excellent. $1500.00 located in the San Fernando Valley. (818)419-1189
Last reply by Jakster884, -
- 4 replies
- 758 views
Looking for a straight chassis for a project (breaks/cracks ok). Rollers ok too if price is right. Dont need or want a complete bike. Must be 1986 pm or txt 619-971-1060
Last reply by Sausage450r, -
- 0 replies
- 706 views
BIG LOT of Stock handlebars....Also some others in there too .Take ALL of them for $225 Bucks (Over 30 Pairs) Call Andy 760-443-754 EIGHT
Last reply by Poule43, -
- 1 follower
- 14 replies
- 471 views
Well, after many years of service, a buddy wanted to buy my original ATC 70 BBQ........Since I had another one in parts due to @matt86m building a BBQ the size of a 18foot trailer equiped with 4X4 and a winch to be able to move it 3 feet I have been squiriling away parts for the last few seasons and TODAY with the rain and my original being gone this week decided to get it done!!!!! Thanks to @ROBERT L for getting my front tire buffed / Thanks to Woody and Bones at OMF for the reinforcement rings....and thanks to my wife Mia for helping me assemble it today (and putting up with my 70 addiction !) First pic is of the original #1 70Q and here is the new one…
Last reply by BRANDON LONG, -
Last reply by HairyJR, -
.png){kind=icon}
