ATC's and 70's
Buy / Sell your ATC and '70
30 topics in this forum
-
- 19 replies
- 2.9k views
Came up with this idea over 10 years ago with @matt86m and @Stugots while eating chicken wings at H(.)(.)TERS one fine Tuesday afternoon in Orange County / I drew it out on a napkin and got all the stuff to do it.....well.....my buddy moved shops and all the parts were lost in the shuffle...... (I was bummed but never took the time to do it all over again....Project was DEAD.......) I often thought about doing it again but with the price of parts and time.....It never happened/ THEN...................... My buddy Dave calls me a couple months ago and says he found a bunch of chopped 70 parts and a plasma cut out frame....I hauld AZZ to his shop and wala......…
Last reply by Poule43, -
- 1 follower
- 14 replies
- 505 views
Well, after many years of service, a buddy wanted to buy my original ATC 70 BBQ........Since I had another one in parts due to @matt86m building a BBQ the size of a 18foot trailer equiped with 4X4 and a winch to be able to move it 3 feet I have been squiriling away parts for the last few seasons and TODAY with the rain and my original being gone this week decided to get it done!!!!! Thanks to @ROBERT L for getting my front tire buffed / Thanks to Woody and Bones at OMF for the reinforcement rings....and thanks to my wife Mia for helping me assemble it today (and putting up with my 70 addiction !) First pic is of the original #1 70Q and here is the new one…
Last reply by BRANDON LONG, -
- 9 replies
- 330 views
Been saving nuts and bolts for years!!!! Finally dumped the bucket and set up the kitchen table and wifey and daughter to sort while watching netflix !!! I am NOT a popular person right now!
Last reply by matt86m, -
- 1 follower
- 20 replies
- 5.5k views
READY FOR that ATC 70 Got tired of not being able to find my favorite 70 grab bar anymore so we made some OG Style Grab Bars / Aluminum $130 for GD.Com peeps including shipping in the contenintal USA /These are 100% made in the USA ! these are AWESOME / Look awesome ESPECIALLY with the Wikid 250r / A+ fenders. They are 1 inch narrowrer than the old prm and look 100% proportional to the atc 70.....Local pu in so cal is possible / Also Delivery to Glamis....saves 10 bucks Pic with Carbon fiber fenders are Maier Pic with Green Fenders are oem A+ Pic with RED fenders are OEM PIC with the white are WIKID IF YOU HAVE FIBERGLASS OEM STYLE YOU WILL HAVE TO TRIM THE FEN…
Last reply by Poule43, -
- 0 replies
- 118 views
After 15 years of the Cartwheels trailer being draged around Glamis - the neighborhood and beach, decided to do a little make over!!! Came out great (didnt change any graphics - just the pannels and some black paint!
Last reply by Poule43, -
- 1 reply
- 278 views
The time has come for me to let my faithful 3 wheeler go to the next owner. I have owned it for 40 years and it has been super reliable. I will miss it but there’s no way I should be allowed back on it at my age, the fact is that it probably has not been ridden 10 hours in the last 20 years. the good, engine runs strong, only had the cylinder off to replace leaking head gasket and ring about 20 years ago. fmf silencer and k&n air filter, otherwise stock. carb. and air filter just cleaned, gearlube changed. comes with paddles, original gold wheels and extra set of dirt tires. current green sticker, pink slip in hand. …
Last reply by Crusty, -
- 10 replies
- 909 views
82 Honda 110. I have owned it since about 87. Used off and on but has mostly sat majority of its life. After market carb(stock carb I could not get it to come back to idle quickly, would hesitate for a few seconds then settle down) I do have original carb still. New seat cover. Tires in great shape. Plastics all there but has some cracks. Runs very good, reg current and have title. Located in San Diego. No hassle price of $1000. If it does not sell for that I will store it and use it occasionally for another 30 years Rob. 619-971-2621 IMG_0271.mov
Last reply by Crusty, -
- 1 follower
- 0 replies
- 196 views
I'm looking for an ATV and stumbled onto this. I know nutN 'bout it. https://westslope.craigslist.org/snw/d/loma-1979-honda-atc-110/7693379062.html BTW, Fruita is about 20 miles from UT on I-70.
Last reply by Stinky, -
Anyone have an extra frame ? been putting away parts the last few years and decided to build a custom Flat Track 70.....I need a beater frame to cut up. It will be extended 3 inches forward and 3 inches in the rear. If anyone has an old frame they want to get rid of let me know. here is the race from last year!
Last reply by Twigster, -
- 25 replies
- 1.5k views
Decided to try to part with my 250r. Bought it a couple years ago during Covid for a premium, rode it twice and had engine troubles(overheated). Took it partially apart to check the head gasket and it needs an engine rebuild. Sat on it for a while hoping I’d have the time and money to rebuild but I’m not sure when that time will be. What I know: it’s complete, but apart. Has a newer thrill seekers seat cover, I polished up the tank when I got it (was white and faded), rear fenders were cracked so I cut them. Has a DuraBlue heavy duty axle, new (2 rides) x ring chain and sprockets, forks have new seals and boots, case saver bolt holes are cracked, put an UPP poly case…
Last reply by Sausage450r, -
- 3 replies
- 265 views
some new rollers headed to AZ to my buddy @parker@gearone some sweet OG Sterdy billet blank canvas rollers ready for Parker and Crew to build!! You have motivated me to get my bikes going!!!!
Last reply by parker@gearone, -
- 4 replies
- 1.4k views
1985 Honda atc 70, Piranha 140 electric start, new lithium battery, Loco front forks, OMF billet wheels, LED front and tail lights, Honda 400 start stop controls on bars, Pink and Reg in hand $5500 Jonathan 951-520-3002
Last reply by RPMsRUP, -
- 4 replies
- 764 views
I have an ATC to sell. 88 Kit installed, New Chain, Rear Axle, New rims and tires. Pull start. Runs excellent. $1500.00 located in the San Fernando Valley. (818)419-1189
Last reply by Jakster884, -
Last reply by HairyJR,
-
70 for sale
by Kevin- 1 follower
- 15 replies
- 1.7k views
Just drug this outta storage, picked up a decade ago and haven’t done anything with it. Don’t know what year it is, it’s got maier plastics and tank frames been painted grey as have wheels. Located in lake Havasu Arizona. Asking $1500 update.. it runs carb was gunked up
Last reply by Stugots, -
- 1 reply
- 766 views
1984 Honda ATC70 $3000 Corona ca -Piranha 140cc E start motor swap -mukuni VM26 carb - pro taper bars, ODI grips. -new seat, new plastics. - Spanglers shifter, pegs, heel guards, rear brake kit, hidden ignition and light switch, light kit. - frame was powder coated black. -all new bearings, chain, sprockets, thumb throttle, throttle cable etc. - bike is in great shape. All the work was done in 2021. It’s a blast to ride and super fast. Great bike for cruising around camp. Bike is currently registered and I have the pink slip. Not common for these old bikes. It was a hassle to get the pink and registration.
Last reply by Schnitzel, -
- 4 replies
- 762 views
Looking for a straight chassis for a project (breaks/cracks ok). Rollers ok too if price is right. Dont need or want a complete bike. Must be 1986 pm or txt 619-971-1060
Last reply by Sausage450r, -
- 2 followers
- 11 replies
- 2.5k views
OK, since you can NEVER have too many I have decided to do a build that I have been collecting parts for started this weekend. Wife is away in Sweden spending sme time with her sick dad and I ham here on the homefront with the kids holding down the fort...Besides all the regular CHAOS with lacrosse, work, meals, laundry, workouts, ccd, chores, broken plumbing lines, house fixes, pruging uneeded stuff,.....etc......I thought this would be a bit of positive energy.........Soo here goes 3inch stretched Blinged out Gold frame with @Stugots floor glitter and burried clearcoat Sparkles....Looks Incredible Harley Headlight and Custom Bars Black 10 inch frot whee…
Last reply by Crusty, -
1985 Atc70
by Pbuggy- 10 replies
- 1.9k views
1985, Atc70 all original,runs good,1,800.$ located in Mohave valley az, John 909-322-3651
Last reply by jailbird141, -
- 1 follower
- 2 replies
- 1.2k views
1986 Honda Trx70. In overall excellent condition for being 36 yrs old. Low usage. New tires, fuel Lines and filters. Its mostly original Including the original tool kit and manual. No cracks in the original plastic. Pink slip in my name In hand. Current registration and green sticker. $3200. Located in Tehachapi Ca
Last reply by Kofire, -
- 1 follower
- 1 reply
- 957 views
EDIT: found a frame and axle on ebay, let the build begin! 🤙
Last reply by Poule43, -
- 5 replies
- 1.4k views
Sold off my San Diego Charger bike that I had built years ago (2021 SUCKED!!!!) . Saved all the Custom pieces soo I could build it again,.....BOOM !! Back better than Ever. I added wheel spacers / Aluminum one off beadlocks Sterdy wheels / Black Sterdy Billet / Sterdy Pipe / Sterdy 125 Lifan Pull Start Conversion motor / ProTaper Bars Everything Powdercoated / Leigh Brunskill Shed Built Fab Trailer Hitch / Sterdy Aluminium back frame plate / OG headlight / Custom tabbed light brackets welded on the forks b4 powdercoat / Pro Weld Custom # Plate that will have a trailer hitch Charger Emblem on it / ASV brake lever!!!! Couple little things to add and it will be DONE!!!!…
Last reply by Poule43, -
- 9 replies
- 1.9k views
Custom ATC 70 Ammo cans with Paracorded handles / Great Gifts!!!!! 1973 Can Orange / 1983 Christmas Special Blue / 1985 Red $45 Each / Call Andy 760-443-754 EIGHT
Last reply by Poule43, -
- 3 replies
- 1.2k views
Here is the latest of the Trailers for our Ammo Cans and Grab Bars!!!!! It came out SWEET. Gonna powdercoat it after the ATC invasion this weekend in Glamis!!!! we are gonna paracord all the handles and skin the inside walls instead of the flags / it was a lot of work but it came out beautiful! Happy New Year Peeps!!!!
Last reply by Poule43, -
- 2 replies
- 1k views
Anyone out there have any axels they wanna get rid of....I am building a cool ATC 70 Q (BBQ) atc 70. I am in need of TWO stock atc 70 axels. Let me know Andy
Last reply by Greengo,