Jump to content
Kraut_n_Rice

CNC replacements

Recommended Posts

Posted (edited)

Has anyone been able to find replacement for CNC brake parts?

The company I work for uses some in one of the machines we build.  Obviously, we need to find a different source.  Specifically, the 274S master cylinder assy, and the 1484 reservoir.  I didn't see anything in the Latest Rage catalog,  Wilwood has a M/C, and a bracket that will probably work.  Don't need the pedal, as we fab out own.   But, not a cheap remote bolt on type reservoir.  It basically needs to be the "exact" same parts, as there are pre-made, adjoining parts that use the mounting holes. 

 

Any help would be appreciated...

 

edit...  I don't want to say it's ok that these replacements could be Chicom junk, but in reality all this system mostly does is activate a relay via the pressure switch in the hydraulic line..

Edited by Kraut_n_Rice

Share this post


Link to post
Share on other sites

Share this post


Link to post
Share on other sites

Kartek bought all of their left over inventory. I just ordered some spare parts.

Share this post


Link to post
Share on other sites
19 hours ago, Legit Duner said:

ebay

My problem isn't that I just need one, I need 20+ a year.  So, ultimately another company as a replacement.

10 hours ago, jjoseph99 said:

Similar, remote reservoir though.

Share this post


Link to post
Share on other sites

Kartek has all of CNC’s stock and they also have Jamar that makes pretty similar parts 

Share this post


Link to post
Share on other sites
On 6/5/2019 at 5:39 PM, Kraut_n_Rice said:

My problem isn't that I just need one, I need 20+ a year.  So, ultimately another company as a replacement.

Similar, remote reservoir though.

Ahh!  No way to re-tool and use something that will never go obsolete? Like a Honda part?

Share this post


Link to post
Share on other sites

I need something that is backwards compatible as well.  If LR knocked off the CNC parts, I would be golden....

Share this post


Link to post
Share on other sites
26 minutes ago, Kraut_n_Rice said:

I need something that is backwards compatible as well.  If LR knocked off the CNC parts, I would be golden....

they knocked off the CNC tall resi under brakes parts, also for me the Empi Resi has worked better than the CNC, resi,

as for the pedal holders

Latest rage make the 12 copy of the CNC, and Willwood makes all the hanging stuff,

me and Sandroosten are talking about making the hanging pedals like CNC 18'' 16'' 20'' using the Latest rage resi or the Empi resi,

I do not like the clip on willwood resi

http://www.latestrage.net/pedal-assemblies-and-turning-brakes-879/master-cylinders-2236

 

Share this post


Link to post
Share on other sites

I need the M/C with remote res., and the bolt on remote res. All the LR M/Cs I see have integrated res.  I'm basically using a reverse swinging(hanging) mount set up under a floor with our own pedal.  Bracket and M/C are under the floor, pedal comes up through the floor.  Res. is mounted on a short distance away. 

I've found some Wilwood stuff that may work.  Should have it next week to see.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Preview Post

More Links

©2001 GlamisDunes.com.
All rights reserved.

×
×
  • Create New...