Site Sponsor Kraut_n_Rice Posted June 2, 2022 Site Sponsor Share Posted June 2, 2022 (edited) We dismantled one of the old machines at work, and I've been tasked with getting rid of the usable higher dollar items... Drove the machine in to tear it apart earlier this year. If you're interested, I also have one that threw a rod, but otherwise complete I would combine with this. I'd make a GD.com member a better deal than what I have it listed for on ebay.. https://www.ebay.com/itm/195103862895 Edited June 2, 2022 by Kraut_n_Rice Quote Link to comment Share on other sites More sharing options...
Board Moderator Grease Monkey Posted June 2, 2022 Board Moderator Share Posted June 2, 2022 40 minutes ago, Kraut_n_Rice said: We dismantled one of the old machines at work, and I've been tasked with getting rid of the usable higher dollar items... Drove the machine in to tear it apart earlier this year. If you're interested, I also have one that threw a rod, but otherwise complete I would combine with this. I'd make a GD.com member a better deal than what I have it listed for on ebay.. https://www.ebay.com/itm/195103862895 Whats the bellhousing diameter on this unit. Im thinking of using something like this with adapters to test marine transmissions with adapters. Currently using my lathe but doesnt have the toque for bigger gears. Trade for some water tanks Quote Link to comment Share on other sites More sharing options...
Site Sponsor Kraut_n_Rice Posted June 2, 2022 Author Site Sponsor Share Posted June 2, 2022 (edited) I would say it is a #5. It's up on a pallet rack right now, so I can't really measure it (or take a pic of the other side).. The xref for the Hayes coupler on it indicates #5. I believe it currently has an overhung load adapter with a keyed shaft on it know. That is what the v-belt and chevron belt pulleys are attached to. You should be able to fix a drive shaft yoke to it pretty easy. It would need an air cleaner and exhaust fitted. Looks like one of the guys took the blown up one home, so that's out.. Edited June 2, 2022 by Kraut_n_Rice Quote Link to comment Share on other sites More sharing options...
Site Sponsor Kraut_n_Rice Posted October 13, 2022 Author Site Sponsor Share Posted October 13, 2022 Bump Quote Link to comment Share on other sites More sharing options...
Jammer75 Posted October 14, 2022 Share Posted October 14, 2022 On 6/2/2022 at 12:35 PM, Kraut_n_Rice said: We dismantled one of the old machines at work, and I've been tasked with getting rid of the usable higher dollar items... Drove the machine in to tear it apart earlier this year. If you're interested, I also have one that threw a rod, but otherwise complete I would combine with this. I'd make a GD.com member a better deal than what I have it listed for on ebay.. https://www.ebay.com/itm/195103862895 I'm in Gilbert and would have a use for this. What is bottom dollar for a GD Dunes buddy..? Quote Link to comment Share on other sites More sharing options...
Site Sponsor Kraut_n_Rice Posted October 30, 2022 Author Site Sponsor Share Posted October 30, 2022 Gone. THX Josh. I will have a 66hp John Deere up soon... 1 Quote Link to comment Share on other sites More sharing options...
Realbadlarry Posted October 30, 2022 Share Posted October 30, 2022 Will it run a Blender? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.