Jump to content

2005 Honda TRX450R - Kickstart


Desertdogs
 Share

Recommended Posts

So Slappy and FNG - How do you edit a post now?  Couldn't find it.

 

Here is details about quad and why it's for sale.

Asking $7,000 - low hours, all new parts, etc. I know an average stocker goes for 4-4k

Honda 2005 TRX450R Fourtrax (Kickstart)

Bike was purchased in 2017 from 2nd owner; both he and first owner had stored bike for years because it was “too fast” for them.  Stock tires still had nubs on them, and there were zero scratches on the underside of a-arms, swingers, or stock plastic skids.  Plastic is scratched from them putting things on it while it sat in garage. I have pictures of the build to show this.

I did a complete rebuild on bike in 2017 to equip it with the gear that has proven successful on my previous bikes in the deserts of California and Mexico - for racing and the big dunes of Mother G!!

Upon completion of the build in late 2017, there were carb issues, so I replaced the carb.  Then life threw me a curve - a hernia, with 6 months of healing during 2018-2019.  Then an injury to my hand in 2020, which required multiple surgeries - sidelined me again from riding the bike.  In the last three years, I’ve probably put only 6 hours on the bike, all desert trails. Now, as they say, with age comes cage, so it’s time to let it go so there is more room in the garage.  Bike runs great, starts first kick, and is a blast to ride.  Whoever buys this is getting a terrific package, and one of the best quads ever built.  I have receipts for all parts, and probably missed a few items.  Will not trade, barter or swap.  Cash only.  This is located in the Carson City/Reno area, so consider that.  

Wheels & Tires

  • ITP Holeshot XCT 23x7x10 Front Tires on stock rims
  • .190 Douglas Wheels Blue Label 10x5 3.0+2 Front Wheels (New In Box)
  • ITP Holeshot XCT 22x11x9 Rear Tires on stock rims
  • .190 Douglas Wheels Blue Label 9x8 3.0+5 Rear Wheels (New In Box)
  • Skat Trak Mohawks 21x7x10 Front on Douglas A5 Wheels
  • Skat Trak Haulers 20x10x9 - 8 paddle Rear on Douglas A5 Wheels

Suspension

  • JD Performance +3 wider/+1 forward Long Travel Desert A-Arms
  • Streamline Extended Poly Coated Brakelines
  • Streamline Billetanium Rebuildable Steering Stabilizer w/7 Position Settings
  • Elka Stage 3 High Performance Shocks - Front Dual Rate Springs/Rear Quad Rate Springs - Adjustable Rebound and Compression
  • New Tie Rod Ends
  • Tie Rods w/ Slots for Wrench for Adjustments
  • 2006 Swingarm - 3/4” longer - better hookup out of turns - all bearings new
  • Lone Star Racing DC-6 Rear Swing Arm Linkage
  • Durablue Heavy Duty Eliminator 2+2 Axle
  • Lone Star Racing Anti-Fade Lock Nut and Sprocket Mount
  • Lone Star Racing High Performance Axle Bearing Housing w/tapered bearings
  • Lone Star Racing Parking Brake Block-Off
  • Glann Innovations Swingarm Pivot Bolt - Zerk for adding grease

Controls

  • Pro-Taper Contour ‘Fat’ Handelbars w/ CR Hi Bend
  • IMS Roll Designs Handlebar Clamps w/Anti-vibe bolts and spacers
  • IMS Roll Designs +2 Steering Stem
  • Tether Kill Switch
  • Handlebar mounted Light Switch - Off/On/Low/High
  • IMS Roll Designs Desert Pegs
  • New Hot Start Cable & Assembly
  • Pro Taper Adjustable Clutch Perch
  • Motion Pro Clutch and Throttle Cables
  • Motion Pro Vortex Throttle

Chassis, Misc.

  • Renthal Sprockets 13 front - 37 rear
  • PRM Products Heavy Duty Swingarm Skid Plate
  • PRM Products Rear Baja Grab Bar
  • PRM Products Front Desert Bumper
  • Pro Armor Full Belly Skid Plate
  • Quad Tech Gripper Seat Cover and New Hi-Flite Taller Seat Foam
  • TM Designworks Case Saver
  • TM Designworks Chain Slider, Chain Roller, and Chain Guide
  • Hi-Pressure Radiator Cap
  • IMS 3.8 gallon fuel tank - extra range w/ New Jet Star Petcock Assembly
  • New Rear Brake Master Cylinder
  • New Fuel and Vent Lines
  • New Keihin Carb QA16AB
  • FMF Q4 S/A Silencer w/ Fresh Repack Kit
  • Uni Dual Foam Filter w/ Pro Design Aluminum Airbox Rings
  • Modified Air Filter Lid w/ new stock replacement lid for tuning for different ride areas
  • Quick Release Whip Holder
  • New Brake Pads
  • New Oil Filter
  • All Fluids are Honda or Maxima

Spare Parts - See Pictures

- Sprockets

- Motion Pro Cables

- Neutron Brake Brads

- Neutron Oil Filters

- Spark Plugs

- FMF / Dynojet Jetting Kit and Numerous Honda Keihin Jets w/ Carb Bowl Tool and Jet   Removal Tools

- Pivot Works Wheel and Swingarm Bearings

- Plastic Clips

- New HD 520 Xring Drive Chain

- Fuel and Vent Lines

- Lug Locks

- Sprocket Bolts

- Clamps and Bolts

 

Tools

- Acerbis Spark Plug Holders

- Motion Pro Carb Screw Adjuster (Modified Screw Driver)

- Motion Pro Spark Plug (16mm) Socket and Extension

- Syringe w/Lube Needle for Bearings

- Low Pressure Tire Gauge - New in Box

- Chain Link Breaker

- Axle Nut Wrenches (3 various sizes - help your friends)

 

Fluids

- Pro Taper Grip Glue

- Maxima Air Cleaner Cleaner and Oil

- Maxima Chain Cleaner and Chain Wax Lube

- Maxima 4-Stroke Oil

- Maxima Brake Fluid

- Uni Foam Filter Oil

- Honda HP Coolant

IMG_5404.jpg

Link to comment
Share on other sites

Trying to edit. Can’t seem to find it. 

Asking $7,000 - low hours, all new parts, etc. I know an average stocker goes for 4-4k

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

Shout Box

Shout Box

You don't have permission to chat.
    ×
    ×
    • Create New...

    Important Information

    Terms of Use Privacy Policy