Jump to content

BoogerDeuce

Members
  • Content Count

    52
  • Joined

  • Last visited

Community Reputation

5 Neutral

About BoogerDeuce

  • Rank
    Gunner

Previous Fields

  • Campsite
    Wash 10ish
  • Your Ride
    SCU

Recent Profile Visitors

351 profile views
  1. Holy smokes old thread resurrection record here! Styles for the win!
  2. These have the internal ballast for that clean look FYI
  3. Plenty of life left in these. A few small nicks in the cups, but no big chunks missing. If yours are newer or older, maybe a little bit of cash to even things up. I’m keeping the wheels located in San Diego thanks!
  4. Good condition, with covers. 50W. Have combo lenses. I’m in Glamis with them this weekend in the washes if anybody cares to come check them out.
  5. Drivetrain loss is most certainly dependent on load, and is not fixed based upon the transaxle type. It's obviously much more complicated than this, but here is just a snippet of the action, but I'd venture to guess it is the primary loss driver. Consider any pair of spur gears; due to the pressure angle that conical on conical gear faces have (they are never perfectly aligned, that's just geometry folks) for any force applied by the first gear, the second gear sees both a tangential force (that's the transmitted force) as well as a radial force (this is the wasted force, parasitic loss, whatever you want to call it). More force applied, more total lost force. For simplicity, %loss it a much better formula.
  6. I'm using the radiator stop leak and coolant mix, getting sick of it weeping out and onto the trailer floor. Next time around I'll go with the liquid starch.
  7. Car looks awesome! Super inspiring thread , more pics please! Which light pods are those? Just curious with the mid and low height mounting whether it gives you enough light for night rides? It doesn’t look like a ton of light but these things put out a deceptively large amount of light these days so just thought I’d ask
  8. Generally you want to torque things up as much as the materials allow. Have higher strength bolts? , go with a higher torque (as long as the adjacent material and threads are adequate as well). These charts are all based upon a set percentage of bolt stretch (typically 65% of yield strength). The more bolt torque (preload force) that is applied to the joint, the harder it is to pull it apart. When you pull it apart (called joint gapping), the joint can slip, misalign, impact (that's typically the worst result)....basically bad things happen. Preload via installation torque alone is a poor method for fastener retention. Even as slick as those Nordlocs look, while they do lock well, they most certainly create other problems- namely they permanently deform the mating face, mar the surface, potentially cause corrosion sites , and most of all the indents become crack propagation initiators. Personally I'd stick to high strength fasteners at the appropriately high torque, and then use temporary Loctite.
  9. Agreed on the measurement method, but toe in aids in straight forward tendency, and not sure that is desired for duning. Yes for drags probably but that’s not my jam. Whenever I’ve run any significant toe in, the car turns like a dog or seems to plow. I’ve played quite a bit with this on the Tom Pro car at least, and it started to really want to turn well once I had at least 1/4” toe out. I think I stopped at 3/8” toe out it really started hooking into the turns hard at that point. And yes I could definitely feel the progression and response change. It’s really easy to adjust and test and felt pretty rewarding to dial it in. Breaking in the new to me buggy steering I’ll start at zero then begin adding toe out in between rides until it gets happy.
  10. Ur right, got my science-ey word backwards! either way, the paint supplies it’s own reaction energy to cure
  11. It didn’t react with the filter, it reacted with itself. It’s called an endothermic reaction, and is common with epoxies mostly, but really all thermoset resins, like polyester, polyurethane, etc. What happens is it gives off heat as the polymer crosslinks/cures. If there is a large amount of the material together, it can really build up lots of heat and ignite itself. So a hepa filter would be a good place to collect lots of curing paint. Fun stuff, although I’ve mostly only seen it in a cup or bucket full of curing epoxy or polyester resin. Typically just the leftovers, you know?
  12. Ran across in an off road warehouse advert and just wondered if any duners had tried this one or the generic versions? I’ve got the sport mode and eco button in my commuter car and it is pretty darn fun. https://pedalcommander.com/?utm_campaign=Pedal+Commander&utm_source=adwords&utm_medium=ppc&utm_term=pedal commander&hsa_acc=4704139283&hsa_cam=2040666662&hsa_ad=356416835031&hsa_tgt=kwd-302408449673&hsa_grp=71114985574&hsa_mt=e&hsa_net=adwords&hsa_ver=3&hsa_kw=pedal commander&hsa_src=g&gclid=CjwKCAjw8NfrBRA7EiwAfiVJpfFFheqqJAmnQSWKxCFicxPnVX6dMrHDsJhbEsxJxvyElzBdvA3W9RoC0CcQAvD_BwE

More Links

©2001 GlamisDunes.com.
All rights reserved.

×
×
  • Create New...