Jump to content

bob@randbtruckcenter.com

Members
  • Content Count

    222
  • Joined

  • Last visited

Community Reputation

9 Neutral

About bob@randbtruckcenter.com

  • Rank
    Special ops

Previous Fields

  • Campsite
    Gecko
  • Your Ride
    Tatum

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Time Left: 28 days and 11 hours

    • FOR SALE
    • USED

    2009 INTERNATIONAL 4400 Custom one of a kind Truck $49,995.(See Build sheet in Image’s)Approx. 82,238, miles on Truck but this Motor has 37,451 miles ( supplied by International Factory)Custom InteriorCarpetCustom Aluminum Bed was $10,000DT466 (This is the Million Mile Motor)Allison 6 SPEED TransmissionAir Ride SuspensionAir Ride SeatsGooseneck Ball/HitchTire’s almost newGVCW – Gross Vehicle Combined Rating – Maximum total weight of the vehicle and the trailer attached, so can only get this if we know what trailer weight with a load is.GVWR – Gross Vehicle Weight Rating is 24,500GAWR – Gross Axle Weight Rating – Front GAWR – 9000, Rear GAWR 15,500EXCELLENT CONDITION TRUCKNew International Motor was replaced at 44,788 miles under Factory Warranty so current motor has 37,450• This Truck was originally manufactured and sold to the Fire Department and was hardly used.• A collector purchased it and completely customized the entire Truck including getting International to install a Brand New Motor with Warranty. (Please see copies of all invoices and receipts in images)• All Receipts and Documents are available for review and will go to the new Owner• Just completely Serviced / new Oil/Filters/ Detailed… ready to go• VIN: 1HTMRAAM19J040080• Stock# 64494• Year: 2009• Make: International• Model: 4400• Body: Med duty flatbed• Color: Red white• Miles: 82,238$49995. Financing is availR&B Auto and Truck CenterEst. 198616020 Foothill Blvd.Fontana, CA 92335Certified Master Dealer- NIADAAAA Certified Service ProviderA+ Rating with BBB

    $49,500.00

    Fontana, California - US

  2. View Advert International with Aluminum Flatbed $49,500 2009 INTERNATIONAL 4400 Custom one of a kind Truck $49,995.(See Build sheet in Image’s)Approx. 82,238, miles on Truck but this Motor has 37,451 miles ( supplied by International Factory)Custom InteriorCarpetCustom Aluminum Bed was $10,000DT466 (This is the Million Mile Motor)Allison 6 SPEED TransmissionAir Ride SuspensionAir Ride SeatsGooseneck Ball/HitchTire’s almost newGVCW – Gross Vehicle Combined Rating – Maximum total weight of the vehicle and the trailer attached, so can only get this if we know what trailer weight with a load is.GVWR – Gross Vehicle Weight Rating is 24,500GAWR – Gross Axle Weight Rating – Front GAWR – 9000, Rear GAWR 15,500EXCELLENT CONDITION TRUCKNew International Motor was replaced at 44,788 miles under Factory Warranty so current motor has 37,450• This Truck was originally manufactured and sold to the Fire Department and was hardly used.• A collector purchased it and completely customized the entire Truck including getting International to install a Brand New Motor with Warranty. (Please see copies of all invoices and receipts in images)• All Receipts and Documents are available for review and will go to the new Owner• Just completely Serviced / new Oil/Filters/ Detailed… ready to go• VIN: 1HTMRAAM19J040080• Stock# 64494• Year: 2009• Make: International• Model: 4400• Body: Med duty flatbed• Color: Red white• Miles: 82,238$49995. Financing is availR&B Auto and Truck CenterEst. 198616020 Foothill Blvd.Fontana, CA 92335Certified Master Dealer- NIADAAAA Certified Service ProviderA+ Rating with BBB Advertiser bob@randbtruckcenter.com Date 12/12/2019 Price $49,500.00 Category RV's and Trailers For Sale  
  3. Good morning. I could go into a long 10 year epic but I will spare you the details. Im 56 and been a athlete my whole life. 8 years ago I was following my Son and his friends thru the dunes and came up short on a long roller and broke my Back. Since then, I have had three Back Surgeries The first one was with Tiger Woods Back Surgeon in Marina Del Rey ( Robert W- terrible experience and if your not a famous Athlete, you are just not important. He told me it was going to be 6 hour Surgery and turns out it was just over a hour) The Second was with Dr Mulimed in MDR at the Spine Center ( Good result, good surgeon but after a 7 hour surgery , i was still at 70% Then , I found a Surgeon name Dr. Elizabeth Norheim is an orthopedic surgeon in Downey, California and is affiliated with Kaiser Permanente Downey Medical Center. 5 hour surgery and is almost perfect. I hope you go see her. IE... She not only took x rays but she also did Cat scans, MRI's and a few other tests ive never heard of. (Both other surgeons only took xrays) She visited me everyday post Surgery while I was in the Hospital for 6 days. I could stand up straight within days. ( I hadnt stood straight in almost 10 years) Post care was spot on 5 star If my Son needed Surgery on his Back, thats where I would take him. 562 657 4361 Dr N. Spine Center Downey In the Hospital for 6 days and it was like the Ritz Carlton ... staff, post care pain management, Bob De Lozier 909 478 4791
  4. Time Left: 22 days and 10 hours

    • FOR SALE
    • USED

    King of Hammer’s ready - Jimmy’s “Bloodline” Race Buggy Build cost was $108,000 + additional $10,000 – from Original Owner Used twice for Trails very mild testing to tune the 3.0 King’s by “Jimmy’s” Jimmy's 4x4 CNC Podium Bloodline finished October 2015 Race ready. Will pass ULTRA 4 with Fuel shut-off valves Engine: Late model GM LQ9 6.0, ZO6 Cam, B&D Harness and Computer, Camaro 8qt pan with IMPROVED RACING trap door kit. K&N Air cleaner, OBX stainless Headers, Holley billet Fuel Pump, Truck Brackets, 105amp Alternator new, Moroso 3qt accumulator, IR adapter Transmission: TH400 HD Race/HD Kit, Hi-Flow Filter, Steel Thrust washers, Torrington under low Planet, NP205 output OEM Non welded Locking Dipstick Converter TCS Billet 2200 Shifter; Winters gate Transfer Case: Atlas II 32 spline front and rear outputs Axles: Torq 14T Front 35 spline RCVs, Rear 40 spline, Spools front and rear 17" Fuel wheels (5) with custom powder coat TIRES: SET OF 5 NITTO "K" Spec Trail Grappler 40x13.50-17 Steering Psc Extreme series 2.75, full hyd kit, (TC/"P") Pump Fuel Cell- #280-032-NF Poly tank enclosed in steel container Jaz 32G race enclosed tank w/extra Injection fitting, NO FOAM Walbro 4-corner pickup ball valve in tank Wilwood MC and brakes with drilled rotors WARN VR8000-s W/syn winch rope PR Chromoly rod ends, 0.75 upper, 1.25 lowers with stainless misalignment spacers 2" Fox bumps all 4 corners 7075 Alcoa links, 1.75" uppers, 2.5" lowers 1.125" 35 spline Curry sway bar Derale dual pass transmission cooler Derale 18" heat sink steering cooler PRP 5 point harnesses with sewn in shoulder pads Optima Red Top battery KOH approved window nets with spring loaded hardware Engine head mounts (along with 2 engine mounts, transmission mount and TC mount for a total of 6 driveline mounts) KOH approved stainless rear window screen King 3.0 w/res, (Internal biPass), (Compression Adj) Lowrance HDS9 GPS with rear Camera 1 new spare Wheel/Tire Net’s Spec’s: Weight- 4500 lbs. Height- 75” w/o light bar / 80” with Light bar up Width - 81 to 88 “ Length – 14 ft $75,000 firm – (don’t ask) … it takes $75, to own it Ultra 4 Race Car KOH Rock Crawler- King Of Hammers – Best in the Desert – Score – Baja – Parker – Laughlin – Gold Coast – SNORE - Bob Delozier 909 478 4791 ORIGINAL BUILD SHEET JIMMY’S 4X4 PG 1 24 S ASH ST. CORTEZ CO. 81321 970-565-8726 fax 970-565-7223 ESTIMATE SHEET BUILD SHEET FOR "CNC" BLOODLINE $35,750 Step #.1-#2.-#3. 2-seat-Podium Bloodline Roller KIT $32,500 Bloodline Roller KIT Podium series; 2.0 x .120 DOM ; Main frame, Hood-line, all door bars, Belly, Lower front Frame rails, Roof over head "X"-ing, Top part of "X" in rear window, and outer rear belt line, "C" support to lower "B" Vertical support 1.75 x .120W DOM; Lower rear frame, Inner Bed and rear shock support Vertical, front window down tubes, Vertical support tubes front window to front frame rails, Nose Verticals, winch fill and support tubes 1.5 x .120W DOM; Front shock vertical support tubes, dual engine cross over tubes, Lower "B" support to belly (Seat "H" mounting), Seat tube 1" x .120W DOM; Dash and center dash for floor layout 1.25x.120W DOM; Engine Skid plate Options Included; Gen IV design Turnkey Fill and Support tube Kit This is all the fill and support tubes for shocks, seats, Gas tank, winch, etc Bumpers Single tube front Included Single tube rear Included Add on options; Tube Options-Material-Weld-wall Thicness; Lower Belly Square thicker .25W Mounts Bloodline series Master Bracket kits-Standard Option's; Tabs & Brackets- All Included in Standard kit Motor mounts at center block, Head mount kit, Transmission adapter mount, Transfercase torque mount, Link mounts at chassis (.25 thick, for 3/4 bolt lower/upper), 1-piece steel Belly Base Mild steel, Hydraulic Valve Tab for under dash, Trans-shifter tabs, Resorvoir Tab, Seat Belt Tabs, Limit strap tabs, Tabs for all sheetmetal "Standard", Swaybar Double shear Tab's Master Bracket Options and Add's; #1.Belly Steel belly 54" #2.link Mounts Link mounts 1/4" for 1.25 lower and 3/4x7/8 upper #3.Radiator Mounts/Cups or tray; Standard Cup style #4. Battery tray Single Optima #5. Motor mount GM LS*/GEN III-IV Standard #6. Transmission mount, Atlas -Standard #7. Transfercase Torque mount, Atlas Standard #8. Fuel Tray 12-16G #9. Steering, Standard #10. Winch Mount, Full drum, Long Fairlead bracket #12. Shock mounts, Dual cross over tube Included in chassis #13. SKID's Engine Skid Plate with UHMW $1500 Upgrade Gusset Kit ---***Ultra 4 rules weld washers tabs on link mounts @ Chassis and axles Side Nerf Bars Pair (Includes Install Time) (skinny, Mid or wide) Passenger Grab Handle **"U" shape with GPS mount 5-7" Lowrance Tab Antenna placed for radio or CB Seatbelt "Race “Tabs Engine head mount kit Rear window alum/stainless screen(Separation from Fuel/Radiator)***Ultra 4 rules .120 Roof-***Ultra 4 rules Extra Acc’s $N/C Place and weld in tow hooks at 4 points on chassis, Place and weld $N/C- Tab to hook winch rope to axle and push bar ------------------------------------------------------------------------------------------ SUSPENSION Bracket kits; 4-link Standard Master Axle Bracket Kit-Large Upper front link Towers Brackets w/weld washer Tab style, Bump stop landing pad's Rear upper Towers for Jimmy’s Traditional mounting, 2-sets of lower link kits, Lower single shock tabs or dual, Weld washer tab style **$1500 Upgrade axle Brackets Rear Truss, Gen II Link mounts with Weld washer tabs, **Includes Fab time ---------------------------------------------------------------------------------------------- Body Front Clips Included’ s HOOD PIN KIT STANDARD 1-piece Universal hood- $250 **Upgrade to Raptor Hood Included HOOD PIN KIT Rear Clips STANDARD Rear Fenders Aluminum w/Aluminum rear ----------------------------------------------------------------------------------------- BLOODLINE ROLLER FABRICATION Turnkey Standard Master Fabrication Chassis; Place motor/trans/t-case (Includes weld in Motor mount and Transmission mount, place and weld Transfer case torque/support mount) weld belly and link mounts "Standard", weld in Fuel tray "Standard 16G", set and weld in winch mount, HYD steering mount "Standard", Radiator mount "Standard", Seats and seat belts, Transmission shifter, Transmission cooler “Standard”, Power steering cooler "Standard", Place gauges, Mount Battery tray-single Firewall location, Power steering reservoir, Mounts for fuel pump and filters Standard, shock Reservoir mounts, Sway bar Double shear Tab's all tabs to go Turnkey INTERIOR; All Floor work/Firewall work, Standard dash and center console, Fuel splash behind seats EXTERIOR; Front kickers, Doors, Roof Standard, Rear Aluminum fenders and Tail gate Axles; Place and weld in all Suspension link mounts, Place weld shock mounts "Standard", Mount front steering Ram, place limit strap tabs, place and weld in sway bar tabs $4201 Step #.4 shocks Shocks and Bumps $1233 $616.50 X qty 2 FOX Factory Series Coil over w/res 2.5x14" $1251 $625.50 x qty 2 FOX Factory Series Coil over w/res 2.5x16" **w/DSC adjuster $702 $175.50 x qty 4 FOX Factory Series Bump stop 2.0 $120 $30 x qty 4 FOX Factory Series Bump stop Mounting can $600 Pac Springs 3.0 ID for 2.5 Coil over $145 Shipping and Handling $150 Limiting straps set of 4, Includes quad straps, Tabs and Bolts, Fabrication to place and weld PRP quad strap $2,615 Step #.5 Suspension Parts ROD END KITS W/SPACERS $855 Large ROD END KIT 7/8 UPPER, 1.25 lower C-Molly Rod Ends, Stainless spacers and Washers Link Material-Aluminum $1760 7075-Large LINKS , Alcoa Material USA 1.75UPPER, 2.5 LOWER $2,356 STEP #6. Steering $1780 Steering Psc Extreme series 2.75 PSC, full hyd kit, (TC/”P”) Pump, Steering VALVE (3.5 turns, other valves are available), COLUMN for Steering WHEEL, RESERVOIR (8” reservoir -8x-12w/low pressure hoses), Hi-Pressure HOSES AND FITTINGS, DUAL 2.75 X 8" (longer Ram is additional) RAM, Large END LINKS (Rod ends and dom tube), $30 PSC steering wheel Disconnect hex $88 Shipping and Handling Steering accessories STEERING WHEEL $90 13” Aluminum w/Rubber Grip UPGRADE’s $50 add extra clamps qty 4 on Fabricated housing) $90 7075 Aluminum Steering Links, dual Ram $150 Under dash cover/Box ***Ultra 4 rules Coolers $78 Derail 18” log cooler $852 Step #7. Fuel Hard Parts; FUEL $435 Fuel Cell– #280-032-NF Poly tank enclosed in steel container No Foam Jaz 32G race enclosed tank w/extra Injection fitting, NO FOAM $78 shipping and Handling 16-22 Steel can tanks $109 FAST FILL KIT -------------------------------------------------- $230 Brake kit wilwood dual master, 1” Bore , Fabricated Pedal (Longer ratio), qty (2) 2# residual Valves $1,177 Step #7. Hard Parts & Accessories; Seats $810 PRP Comp Elite Black n Gray $95 SHIPPING -------------------------------------------------------- $272 seat belts PRP, w/sewn in shoulder pads, 5-point with rear loop, $2822 Step #9. Mechanical and Accessories $700 DRIVE LINES 1350 2.125 X .188W DOM, W/Spicer SPLINES UN Balanced $20 DRIVE LINES U-Bolt kits (Qty 4, Spicer 1350-1410 U-bolt kits --------------------------------------------------------------------------------------------- $800 EXHAUST dual, Flow Master Hush Power FABRICATION/INSTALL --------------------------------------------------------------------------------------------- $500 Currie Sway bar 1.125 Active, 35 Spline --------------------------------------------------------------------------------------------- $680 WINCH WARN VR8000-s W/syn winch rope Blue and Factor 55 flat link Blue $122 Catch cans 1 quart Breather/ with filter; AN6 Inlet 1 pint mini breather w/filter, Dual Inlets 3/8 inlets, $1,082 Step #10 Coolers & Accessories; REAR window od Bed Mount; $699 Radiator Northern 31x19x2.25 dual pass w/ dual elec spal fans and mount, $85 aluminum Brushed Surge tank/Overflow Transmission**Suggest Dual pass $230 Derail Dual Pass aluminum Cooler $68 S&H coolers $2,375 Step #11. Wiring and Electrical $1250 Wiring supplies Standard Package (Includes parts/material for Headlights, top light) Master kill switch, optima Red top, wire, connectors, switch’s ( ignition switch, fan Switch,) clamps, heat shrink, wire ties, relays, fuse block, battery cables, grounds, circuit breakers, fuses, Head lights, Rock lights, rear race lights, Light bar/lights, wire all Communications etc….. Includes; Auto meter Sport Comp 2/16, Coolant Temp, Oil Pressure, Volt, Trans $100 ADD Tail light wiring and Lights $45 ADD Rear Facing Amber ------------------------------------------------------------------------------------------ Lights $280 KC Hi-Lites 2x2” Dually Head light pair $350 36” E Series FRNT or top light $350 mounted in light bar Cradle(protect for roll over) $480 Step #12. Race Kit Options Window nets (sold as a Pair Includes S&H to Jimmy's) $196 HD Twisted Stitch full width window nets KOH certified, covers whole window HARWARE KIT’S $84 Spring Loaded $100 Install to chassis $100 Modify Hardware for full width Window Nets $4,950 STEP #13. Motors; $4500- Used GM 6.0, Added ZO6 Cam, B&D Harness and Computer, Camaro 8qt pan with IMPROVED RACING trap door kit. K&N Air cleaner, OBX stainless Headers, Holley billet Fuel Pump, Truck Brackets, 105amp Alternator new, $450-ADD Moroso 3qt accumulator, IR adapter $3060 STEP #14. Transmissions/Kit; $1800 TH400 HD Race/HD Kit, Hi-Flow Filter, Steel Thrust washers, Torrington under low Planet, NP205 output OEM Non welded $150 Transgo Fwd Full Manual Dipsticks; $60 Locking Dipstick Converters; $850 TCS Billet 2500 Shifter; $200 Winters gate $2,985 STEP #15. Transfer case; No speedo, Regular yokes $2650 Atlas II with 32 spline front output 3.0 $225 Atlas Thm 350-400 adapter $110 Shipping on Transfer cases $1,589 STEP #16. Plumbing Kit; Standard Race; Added oil Accumulator, with brake switch and a line locks, **Less Shor off valves can be added if sold to Race $1268 Standard base PLUMBING KIT— 8600 Push Lock, Race kit KOH certified AN fittings, series 8600 hose ALL HOSES AND FITTINGS FOR; BRAKES; MASTER CYLINDER to Calipers, Cutting Brakes FUEL- INTAKE-REGULATOR-RETURN, VENT W/FILTER , Fuel length vent line to Catch can, over flow, or cap 3Add pressure port for rear Brake Light and Valve for Line Lock/Parking brake (KOH) ** No SHUT OFF VALVES (3 required for Hammer King rules) Radiator Plumbing kit; -16 push lock and 8600 hose (Radiators must have AN fittings and Motor also) $225 Rear Radiator w/Front mount engine (series 1-2 and 3) $19,956 STEP #17. AXLES TORQ AXLE 14T 14T Front axle build $3199 Torq Housing, Torq Drop out, Solid axle Billet Aluminum pinion support, $300 Ring and Pinion $208 Bearing kit $310 spool-35spline equivalent, large GM 1-ton splines $87 Yoke, 1350 U-Bolt $2000 RCV 35spline equivalent 300M $2815 Solid Axle, Key’ d outer knuckle kit, Billet Aluminum steering Arms 6 bolt -------- Total $8,919 14T Rear axle build $3199 Torq Housing, Torq Drop out, Solid axle Billet Aluminum pinion support, $300 Ring and Pinion $208 Bearing kit $325 spool-40 spline $87 Yoke, U-Bolt 1350 $848 FF shaft kit, $1770 Rear full solid axle float kit Spindle and hubs , Brakes -------- Total $6737 ASSEMBLE Labor; $2500, Cut/wled housings setting caster, pinion angle, **$1800 Upgrade Wilwood 4P calipers and 14" SpidertraxHat and Rotor $3,648 Step #18. Wheels and Tires Wheels $2250 WHEELS SET OF 5 FUEL w/Custom Powder coat Tires $3750 TIRES SET OF 5 NITTO "K" Spec Trail Grappler 40x13.50-17 --------------------------------------------------------------------------------- Lug nut kits $48 Lug nut kits standard 6-lug acorn open 5/8 $16,650 Step #19B. Turnkey Finishing work; All Projects are Built With set up parts. During the building process cars will be tore down and put back together numerous amounts of times. Our goal is to keep your new parts as new looking as Possible through the build process. We try to use as many “Mok up” parts and supplies as possible. We use bolts w/Non locking nuts, No washers, they are not used in the build process so at the time of “Final assembly” the Bolts and nuts used on the project will retain there true locking function. All Builds, from a roller to a full turnkey are tore down for final welding of Chassis and Mounts, there is no charge to pick up Chassis and Parts Un-assembled. If you would like your “Build” in a Roller or if you are going full Turnkey, please pick on of the following Mechanical charges) Base Builds; Turnkeys that are Raw or spray painted, Base parts. No extra coolers w/ fans on accessories, base gauges, and Basic Plumbing. no lights Standard Builds; Standard builds are Projects that will get tore completely down and Transported for Powder coating of chassis and Mounts. Most usually will have a 8x10 Trans Cooler with electric fan and a log style steering cooler, no Oil coolers, No Accumulator’s, no race accessories or Communication’s, minor lights, etc… expert extra accessories time to time RACE Builds; RACE builds are Projects that are fully loaded, extra cooling, Item's to pass race Tech, larger fuel tank's, remote fill, full light packages, race accessories and Communication’s along with GPS and Air pumper ------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------ PURE-RACE Build Turnkey w/Full Lights --Powder chassis Includes, Installing All Hard Parts; Mounting all standard Base Build parts, Standard and Race items. accessories $10,000-+ Semi-Race Package’s Non Paint ------------------------------------------------------------------------------------------ Paint and powder coat $1200 Powder Coat Chassis, small parts (radiator mounts, engine mounts, trans-mount, all clamps and Brackets, window net hardware) $200 Spray paint Axle housings/Knuckles, clean Prep and Spray Paint, Rustoelum Satin Black Industrial $4500 Body Paint/PC Paint 1-Piece hood $400 Powder Coat Powder coat all interior panels $350 Custom Raptor Grille Airbrush $2,250 STEP #20. Supplies Bolt kit's, Grade 8, Nylon or steel lock nuts $750 Bolt kit, Turnkey/Race -------------------------------------------------------------------------------------------- $500 Fluids/Race Antifreeze w/Distilled water, Wilwood Brake Fluid 600+, GM Steering Fluid, MAG-1 Transmission fluid Type-F, MOBIL-1 Engine oil, REDLINE 250-Shock prof Gear Lube for both Differentials Supplies; Welding supplies, Grinding discs, Helmet lenses, Rags, Lubes and Cleaners, waste disposal, ETC $1000 Turnkey/Race TOTAL $108,798 Orig build cost It takes $75,000 to own it (please dont offer less, you will be just wasting your time) SEPARATE : I do have a double deck 2017 PJ Trailer with 24 ft deck with Drive over Fenders, Storage Box , Air Compressor, dual tanks, Battery Tender, hose reel, Electrical Panel , LED Lights, under the Trailer and in Box , almost new Tires, brakes, bearings ,, RV Battery , Aluminum ramps for loading upper Deck , Aluminum Wheels, Tandem Axle s , Two WINCH's , one for upper and lower Decks , spare wheel & tire PORTABLE race radio box WITH DUAL SPEAKERS , DUAL Antenna's , one of them is a 12 ft VHF Long Range Antenna with custom neck mount - $13,000 will sell separately We do have transporters avail Bob Delozier

    $75,000.00

    Fontana, California - US

  5. View Advert Jimmy's Bloodline 4x4 Buggy King of Hammer’s ready - Jimmy’s “Bloodline” Race Buggy Build cost was $108,000 + additional $10,000 – from Original Owner Used twice for Trails very mild testing to tune the 3.0 King’s by “Jimmy’s” Jimmy's 4x4 CNC Podium Bloodline finished October 2015 Race ready. Will pass ULTRA 4 with Fuel shut-off valves Engine: Late model GM LQ9 6.0, ZO6 Cam, B&D Harness and Computer, Camaro 8qt pan with IMPROVED RACING trap door kit. K&N Air cleaner, OBX stainless Headers, Holley billet Fuel Pump, Truck Brackets, 105amp Alternator new, Moroso 3qt accumulator, IR adapter Transmission: TH400 HD Race/HD Kit, Hi-Flow Filter, Steel Thrust washers, Torrington under low Planet, NP205 output OEM Non welded Locking Dipstick Converter TCS Billet 2200 Shifter; Winters gate Transfer Case: Atlas II 32 spline front and rear outputs Axles: Torq 14T Front 35 spline RCVs, Rear 40 spline, Spools front and rear 17" Fuel wheels (5) with custom powder coat TIRES: SET OF 5 NITTO "K" Spec Trail Grappler 40x13.50-17 Steering Psc Extreme series 2.75, full hyd kit, (TC/"P") Pump Fuel Cell- #280-032-NF Poly tank enclosed in steel container Jaz 32G race enclosed tank w/extra Injection fitting, NO FOAM Walbro 4-corner pickup ball valve in tank Wilwood MC and brakes with drilled rotors WARN VR8000-s W/syn winch rope PR Chromoly rod ends, 0.75 upper, 1.25 lowers with stainless misalignment spacers 2" Fox bumps all 4 corners 7075 Alcoa links, 1.75" uppers, 2.5" lowers 1.125" 35 spline Curry sway bar Derale dual pass transmission cooler Derale 18" heat sink steering cooler PRP 5 point harnesses with sewn in shoulder pads Optima Red Top battery KOH approved window nets with spring loaded hardware Engine head mounts (along with 2 engine mounts, transmission mount and TC mount for a total of 6 driveline mounts) KOH approved stainless rear window screen King 3.0 w/res, (Internal biPass), (Compression Adj) Lowrance HDS9 GPS with rear Camera 1 new spare Wheel/Tire Net’s Spec’s: Weight- 4500 lbs. Height- 75” w/o light bar / 80” with Light bar up Width - 81 to 88 “ Length – 14 ft $75,000 firm – (don’t ask) … it takes $75, to own it Ultra 4 Race Car KOH Rock Crawler- King Of Hammers – Best in the Desert – Score – Baja – Parker – Laughlin – Gold Coast – SNORE - Bob Delozier 909 478 4791 ORIGINAL BUILD SHEET JIMMY’S 4X4 PG 1 24 S ASH ST. CORTEZ CO. 81321 970-565-8726 fax 970-565-7223 ESTIMATE SHEET BUILD SHEET FOR "CNC" BLOODLINE $35,750 Step #.1-#2.-#3. 2-seat-Podium Bloodline Roller KIT $32,500 Bloodline Roller KIT Podium series; 2.0 x .120 DOM ; Main frame, Hood-line, all door bars, Belly, Lower front Frame rails, Roof over head "X"-ing, Top part of "X" in rear window, and outer rear belt line, "C" support to lower "B" Vertical support 1.75 x .120W DOM; Lower rear frame, Inner Bed and rear shock support Vertical, front window down tubes, Vertical support tubes front window to front frame rails, Nose Verticals, winch fill and support tubes 1.5 x .120W DOM; Front shock vertical support tubes, dual engine cross over tubes, Lower "B" support to belly (Seat "H" mounting), Seat tube 1" x .120W DOM; Dash and center dash for floor layout 1.25x.120W DOM; Engine Skid plate Options Included; Gen IV design Turnkey Fill and Support tube Kit This is all the fill and support tubes for shocks, seats, Gas tank, winch, etc Bumpers Single tube front Included Single tube rear Included Add on options; Tube Options-Material-Weld-wall Thicness; Lower Belly Square thicker .25W Mounts Bloodline series Master Bracket kits-Standard Option's; Tabs & Brackets- All Included in Standard kit Motor mounts at center block, Head mount kit, Transmission adapter mount, Transfercase torque mount, Link mounts at chassis (.25 thick, for 3/4 bolt lower/upper), 1-piece steel Belly Base Mild steel, Hydraulic Valve Tab for under dash, Trans-shifter tabs, Resorvoir Tab, Seat Belt Tabs, Limit strap tabs, Tabs for all sheetmetal "Standard", Swaybar Double shear Tab's Master Bracket Options and Add's; #1.Belly Steel belly 54" #2.link Mounts Link mounts 1/4" for 1.25 lower and 3/4x7/8 upper #3.Radiator Mounts/Cups or tray; Standard Cup style #4. Battery tray Single Optima #5. Motor mount GM LS*/GEN III-IV Standard #6. Transmission mount, Atlas -Standard #7. Transfercase Torque mount, Atlas Standard #8. Fuel Tray 12-16G #9. Steering, Standard #10. Winch Mount, Full drum, Long Fairlead bracket #12. Shock mounts, Dual cross over tube Included in chassis #13. SKID's Engine Skid Plate with UHMW $1500 Upgrade Gusset Kit ---***Ultra 4 rules weld washers tabs on link mounts @ Chassis and axles Side Nerf Bars Pair (Includes Install Time) (skinny, Mid or wide) Passenger Grab Handle **"U" shape with GPS mount 5-7" Lowrance Tab Antenna placed for radio or CB Seatbelt "Race “Tabs Engine head mount kit Rear window alum/stainless screen(Separation from Fuel/Radiator)***Ultra 4 rules .120 Roof-***Ultra 4 rules Extra Acc’s $N/C Place and weld in tow hooks at 4 points on chassis, Place and weld $N/C- Tab to hook winch rope to axle and push bar ------------------------------------------------------------------------------------------ SUSPENSION Bracket kits; 4-link Standard Master Axle Bracket Kit-Large Upper front link Towers Brackets w/weld washer Tab style, Bump stop landing pad's Rear upper Towers for Jimmy’s Traditional mounting, 2-sets of lower link kits, Lower single shock tabs or dual, Weld washer tab style **$1500 Upgrade axle Brackets Rear Truss, Gen II Link mounts with Weld washer tabs, **Includes Fab time ---------------------------------------------------------------------------------------------- Body Front Clips Included’ s HOOD PIN KIT STANDARD 1-piece Universal hood- $250 **Upgrade to Raptor Hood Included HOOD PIN KIT Rear Clips STANDARD Rear Fenders Aluminum w/Aluminum rear ----------------------------------------------------------------------------------------- BLOODLINE ROLLER FABRICATION Turnkey Standard Master Fabrication Chassis; Place motor/trans/t-case (Includes weld in Motor mount and Transmission mount, place and weld Transfer case torque/support mount) weld belly and link mounts "Standard", weld in Fuel tray "Standard 16G", set and weld in winch mount, HYD steering mount "Standard", Radiator mount "Standard", Seats and seat belts, Transmission shifter, Transmission cooler “Standard”, Power steering cooler "Standard", Place gauges, Mount Battery tray-single Firewall location, Power steering reservoir, Mounts for fuel pump and filters Standard, shock Reservoir mounts, Sway bar Double shear Tab's all tabs to go Turnkey INTERIOR; All Floor work/Firewall work, Standard dash and center console, Fuel splash behind seats EXTERIOR; Front kickers, Doors, Roof Standard, Rear Aluminum fenders and Tail gate Axles; Place and weld in all Suspension link mounts, Place weld shock mounts "Standard", Mount front steering Ram, place limit strap tabs, place and weld in sway bar tabs $4201 Step #.4 shocks Shocks and Bumps $1233 $616.50 X qty 2 FOX Factory Series Coil over w/res 2.5x14" $1251 $625.50 x qty 2 FOX Factory Series Coil over w/res 2.5x16" **w/DSC adjuster $702 $175.50 x qty 4 FOX Factory Series Bump stop 2.0 $120 $30 x qty 4 FOX Factory Series Bump stop Mounting can $600 Pac Springs 3.0 ID for 2.5 Coil over $145 Shipping and Handling $150 Limiting straps set of 4, Includes quad straps, Tabs and Bolts, Fabrication to place and weld PRP quad strap $2,615 Step #.5 Suspension Parts ROD END KITS W/SPACERS $855 Large ROD END KIT 7/8 UPPER, 1.25 lower C-Molly Rod Ends, Stainless spacers and Washers Link Material-Aluminum $1760 7075-Large LINKS , Alcoa Material USA 1.75UPPER, 2.5 LOWER $2,356 STEP #6. Steering $1780 Steering Psc Extreme series 2.75 PSC, full hyd kit, (TC/”P”) Pump, Steering VALVE (3.5 turns, other valves are available), COLUMN for Steering WHEEL, RESERVOIR (8” reservoir -8x-12w/low pressure hoses), Hi-Pressure HOSES AND FITTINGS, DUAL 2.75 X 8" (longer Ram is additional) RAM, Large END LINKS (Rod ends and dom tube), $30 PSC steering wheel Disconnect hex $88 Shipping and Handling Steering accessories STEERING WHEEL $90 13” Aluminum w/Rubber Grip UPGRADE’s $50 add extra clamps qty 4 on Fabricated housing) $90 7075 Aluminum Steering Links, dual Ram $150 Under dash cover/Box ***Ultra 4 rules Coolers $78 Derail 18” log cooler $852 Step #7. Fuel Hard Parts; FUEL $435 Fuel Cell– #280-032-NF Poly tank enclosed in steel container No Foam Jaz 32G race enclosed tank w/extra Injection fitting, NO FOAM $78 shipping and Handling 16-22 Steel can tanks $109 FAST FILL KIT -------------------------------------------------- $230 Brake kit wilwood dual master, 1” Bore , Fabricated Pedal (Longer ratio), qty (2) 2# residual Valves $1,177 Step #7. Hard Parts & Accessories; Seats $810 PRP Comp Elite Black n Gray $95 SHIPPING -------------------------------------------------------- $272 seat belts PRP, w/sewn in shoulder pads, 5-point with rear loop, $2822 Step #9. Mechanical and Accessories $700 DRIVE LINES 1350 2.125 X .188W DOM, W/Spicer SPLINES UN Balanced $20 DRIVE LINES U-Bolt kits (Qty 4, Spicer 1350-1410 U-bolt kits --------------------------------------------------------------------------------------------- $800 EXHAUST dual, Flow Master Hush Power FABRICATION/INSTALL --------------------------------------------------------------------------------------------- $500 Currie Sway bar 1.125 Active, 35 Spline --------------------------------------------------------------------------------------------- $680 WINCH WARN VR8000-s W/syn winch rope Blue and Factor 55 flat link Blue $122 Catch cans 1 quart Breather/ with filter; AN6 Inlet 1 pint mini breather w/filter, Dual Inlets 3/8 inlets, $1,082 Step #10 Coolers & Accessories; REAR window od Bed Mount; $699 Radiator Northern 31x19x2.25 dual pass w/ dual elec spal fans and mount, $85 aluminum Brushed Surge tank/Overflow Transmission**Suggest Dual pass $230 Derail Dual Pass aluminum Cooler $68 S&H coolers $2,375 Step #11. Wiring and Electrical $1250 Wiring supplies Standard Package (Includes parts/material for Headlights, top light) Master kill switch, optima Red top, wire, connectors, switch’s ( ignition switch, fan Switch,) clamps, heat shrink, wire ties, relays, fuse block, battery cables, grounds, circuit breakers, fuses, Head lights, Rock lights, rear race lights, Light bar/lights, wire all Communications etc….. Includes; Auto meter Sport Comp 2/16, Coolant Temp, Oil Pressure, Volt, Trans $100 ADD Tail light wiring and Lights $45 ADD Rear Facing Amber ------------------------------------------------------------------------------------------ Lights $280 KC Hi-Lites 2x2” Dually Head light pair $350 36” E Series FRNT or top light $350 mounted in light bar Cradle(protect for roll over) $480 Step #12. Race Kit Options Window nets (sold as a Pair Includes S&H to Jimmy's) $196 HD Twisted Stitch full width window nets KOH certified, covers whole window HARWARE KIT’S $84 Spring Loaded $100 Install to chassis $100 Modify Hardware for full width Window Nets $4,950 STEP #13. Motors; $4500- Used GM 6.0, Added ZO6 Cam, B&D Harness and Computer, Camaro 8qt pan with IMPROVED RACING trap door kit. K&N Air cleaner, OBX stainless Headers, Holley billet Fuel Pump, Truck Brackets, 105amp Alternator new, $450-ADD Moroso 3qt accumulator, IR adapter $3060 STEP #14. Transmissions/Kit; $1800 TH400 HD Race/HD Kit, Hi-Flow Filter, Steel Thrust washers, Torrington under low Planet, NP205 output OEM Non welded $150 Transgo Fwd Full Manual Dipsticks; $60 Locking Dipstick Converters; $850 TCS Billet 2500 Shifter; $200 Winters gate $2,985 STEP #15. Transfer case; No speedo, Regular yokes $2650 Atlas II with 32 spline front output 3.0 $225 Atlas Thm 350-400 adapter $110 Shipping on Transfer cases $1,589 STEP #16. Plumbing Kit; Standard Race; Added oil Accumulator, with brake switch and a line locks, **Less Shor off valves can be added if sold to Race $1268 Standard base PLUMBING KIT— 8600 Push Lock, Race kit KOH certified AN fittings, series 8600 hose ALL HOSES AND FITTINGS FOR; BRAKES; MASTER CYLINDER to Calipers, Cutting Brakes FUEL- INTAKE-REGULATOR-RETURN, VENT W/FILTER , Fuel length vent line to Catch can, over flow, or cap 3Add pressure port for rear Brake Light and Valve for Line Lock/Parking brake (KOH) ** No SHUT OFF VALVES (3 required for Hammer King rules) Radiator Plumbing kit; -16 push lock and 8600 hose (Radiators must have AN fittings and Motor also) $225 Rear Radiator w/Front mount engine (series 1-2 and 3) $19,956 STEP #17. AXLES TORQ AXLE 14T 14T Front axle build $3199 Torq Housing, Torq Drop out, Solid axle Billet Aluminum pinion support, $300 Ring and Pinion $208 Bearing kit $310 spool-35spline equivalent, large GM 1-ton splines $87 Yoke, 1350 U-Bolt $2000 RCV 35spline equivalent 300M $2815 Solid Axle, Key’ d outer knuckle kit, Billet Aluminum steering Arms 6 bolt -------- Total $8,919 14T Rear axle build $3199 Torq Housing, Torq Drop out, Solid axle Billet Aluminum pinion support, $300 Ring and Pinion $208 Bearing kit $325 spool-40 spline $87 Yoke, U-Bolt 1350 $848 FF shaft kit, $1770 Rear full solid axle float kit Spindle and hubs , Brakes -------- Total $6737 ASSEMBLE Labor; $2500, Cut/wled housings setting caster, pinion angle, **$1800 Upgrade Wilwood 4P calipers and 14" SpidertraxHat and Rotor $3,648 Step #18. Wheels and Tires Wheels $2250 WHEELS SET OF 5 FUEL w/Custom Powder coat Tires $3750 TIRES SET OF 5 NITTO "K" Spec Trail Grappler 40x13.50-17 --------------------------------------------------------------------------------- Lug nut kits $48 Lug nut kits standard 6-lug acorn open 5/8 $16,650 Step #19B. Turnkey Finishing work; All Projects are Built With set up parts. During the building process cars will be tore down and put back together numerous amounts of times. Our goal is to keep your new parts as new looking as Possible through the build process. We try to use as many “Mok up” parts and supplies as possible. We use bolts w/Non locking nuts, No washers, they are not used in the build process so at the time of “Final assembly” the Bolts and nuts used on the project will retain there true locking function. All Builds, from a roller to a full turnkey are tore down for final welding of Chassis and Mounts, there is no charge to pick up Chassis and Parts Un-assembled. If you would like your “Build” in a Roller or if you are going full Turnkey, please pick on of the following Mechanical charges) Base Builds; Turnkeys that are Raw or spray painted, Base parts. No extra coolers w/ fans on accessories, base gauges, and Basic Plumbing. no lights Standard Builds; Standard builds are Projects that will get tore completely down and Transported for Powder coating of chassis and Mounts. Most usually will have a 8x10 Trans Cooler with electric fan and a log style steering cooler, no Oil coolers, No Accumulator’s, no race accessories or Communication’s, minor lights, etc… expert extra accessories time to time RACE Builds; RACE builds are Projects that are fully loaded, extra cooling, Item's to pass race Tech, larger fuel tank's, remote fill, full light packages, race accessories and Communication’s along with GPS and Air pumper ------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------ PURE-RACE Build Turnkey w/Full Lights --Powder chassis Includes, Installing All Hard Parts; Mounting all standard Base Build parts, Standard and Race items. accessories $10,000-+ Semi-Race Package’s Non Paint ------------------------------------------------------------------------------------------ Paint and powder coat $1200 Powder Coat Chassis, small parts (radiator mounts, engine mounts, trans-mount, all clamps and Brackets, window net hardware) $200 Spray paint Axle housings/Knuckles, clean Prep and Spray Paint, Rustoelum Satin Black Industrial $4500 Body Paint/PC Paint 1-Piece hood $400 Powder Coat Powder coat all interior panels $350 Custom Raptor Grille Airbrush $2,250 STEP #20. Supplies Bolt kit's, Grade 8, Nylon or steel lock nuts $750 Bolt kit, Turnkey/Race -------------------------------------------------------------------------------------------- $500 Fluids/Race Antifreeze w/Distilled water, Wilwood Brake Fluid 600+, GM Steering Fluid, MAG-1 Transmission fluid Type-F, MOBIL-1 Engine oil, REDLINE 250-Shock prof Gear Lube for both Differentials Supplies; Welding supplies, Grinding discs, Helmet lenses, Rags, Lubes and Cleaners, waste disposal, ETC $1000 Turnkey/Race TOTAL $108,798 Orig build cost It takes $75,000 to own it (please dont offer less, you will be just wasting your time) SEPARATE : I do have a double deck 2017 PJ Trailer with 24 ft deck with Drive over Fenders, Storage Box , Air Compressor, dual tanks, Battery Tender, hose reel, Electrical Panel , LED Lights, under the Trailer and in Box , almost new Tires, brakes, bearings ,, RV Battery , Aluminum ramps for loading upper Deck , Aluminum Wheels, Tandem Axle s , Two WINCH's , one for upper and lower Decks , spare wheel & tire PORTABLE race radio box WITH DUAL SPEAKERS , DUAL Antenna's , one of them is a 12 ft VHF Long Range Antenna with custom neck mount - $13,000 will sell separately We do have transporters avail Bob Delozier Advertiser bob@randbtruckcenter.com Date 12/06/2019 Price $75,000.00 Category Buggies For Sale  
  6. View Advert Ford F 550 4x4 Crew Cab w/ 200’’ wheel base Ford F 550 4x4 Crew Cab w/ 200’’ wheel base 2007 FORD F550 4x4 Custom LARIAT HAULER (45,650 original miles) with ALUMINUM Bed ( Financing is available / trade ins ok Available right now at: R & B Auto Center 16020 Foothill, Fontana 1 owner (custom build) Diesel Custom Leather New Radial Tires Custom Interior 5th Wheel Hitch Loaded (every option avail… windows, locks, cruise, tilt 4X4 - 200" WB Utility Bodyworks Custom Elite 84 Aluminum Haul Be 45,464 original miles 50 gallon spare fuel added to 41 gal factory = 91 gal total diesel fuel Thelma Drive-line Retarder Reyco Granning Air Suspension Custom Roper Leather Carbon Fiber dash and consoles head & center Pioneer AVIC-Z1 : rear seat TV monitor, Sat Radio Electric fold down rear sleeper bed roper leather interior, Thelma driveline retarder HAULER BED includes: Rhino lined , mud flaps, aluminum fenders, complete trailer hookup, spare tire, tool boxes, headache rack with lights, installed, undercoated, painted to match truck. WINDOW TINT RECOVER FACTORY SEATS - front & rear CUSTOM BUCKET SEATS - power base cloth or like leather REAR SOFA SEAT - power base cloth or like leather RECOVER REAR FACTORY SEAT-LEATHER 6-WAY POWER SEAT BASE - DRIVER 6-WAY POWER SEAT BASE - PASSENGER WOOD FLOOR CONSOLE WITH: high gloss-high performance finish DRINK HOLDERS AND STORAGE OVERHEAD WOOD CONSOLE: high gloss-high performance finish CB RADIO - with weather channel RADAR DETECTOR - with laser escort 8500 REAR SEAT ENTERTAINMENT SYSTEM GAUGE PACKAGE - pyrometer & turbo boost STEREO SYSTEM EQUALIZER HITCH REAR BUMPER HD BLACK REAR ROLL PAN MUDFLAPS, BRACKETS, WEIGHTS, ANTI-SAILS BED SIDE PROTECTORS - PAINTED HEADACHE RACK WITH LIGHTS TAIL GATE RUBBER RUBBER BED MAT BED LINER FIBERGLASS GROUND EFFECTS RUNNING BOARDS DIAMOND PLATE OR EXTRUDED ALUMINUM RUNNING BOARDS FRONT & REAR STAINLESS STEEL RUNNING BOARDS FRONT & BACK RUNNING BOARD LIGHTS SUN VISOR FRONT SPOILER VENT SHADES REAR CAB DEFLECTOR HOOD PROTECTOR BILLET GRILL TOW HOOKS CLEAR COAT CUSTOM PAINT ALUMINUM WHEELS - (4) Rhino Liner Box tops ALUMINUM AUXILIARY FUEL TANK 90 Gal W/TOOL BOX W/SWITCHING VALVE AIR RIDE WITH ON BOARD COMPRESSOR and GAUGE This is a very rare Truck, especially in the 4x4 / 200” WB configuration. 909 829 1140 R&B Auto and Truck Center – open 7 days a week 8am to 9pm Est. 1985 16020 Foothill Blvd. Fontana, CA 92335 Certified Master Dealer- NIADA AAA Certified Service Provider A+ Rating with BBB Advertiser bob@randbtruckcenter.com Date 11/23/2019 Price $50,000.00 Category Cars and Trucks For Sale  
  7. Time Left: 9 days and 12 hours

    • FOR SALE
    • USED

    Ford F 550 4x4 Crew Cab w/ 200’’ wheel base 2007 FORD F550 4x4 Custom LARIAT HAULER (45,650 original miles) with ALUMINUM Bed ( Financing is available / trade ins ok Available right now at: R & B Auto Center 16020 Foothill, Fontana 1 owner (custom build) Diesel Custom Leather New Radial Tires Custom Interior 5th Wheel Hitch Loaded (every option avail… windows, locks, cruise, tilt 4X4 - 200" WB Utility Bodyworks Custom Elite 84 Aluminum Haul Be 45,464 original miles 50 gallon spare fuel added to 41 gal factory = 91 gal total diesel fuel Thelma Drive-line Retarder Reyco Granning Air Suspension Custom Roper Leather Carbon Fiber dash and consoles head & center Pioneer AVIC-Z1 : rear seat TV monitor, Sat Radio Electric fold down rear sleeper bed roper leather interior, Thelma driveline retarder HAULER BED includes: Rhino lined , mud flaps, aluminum fenders, complete trailer hookup, spare tire, tool boxes, headache rack with lights, installed, undercoated, painted to match truck. WINDOW TINT RECOVER FACTORY SEATS - front & rear CUSTOM BUCKET SEATS - power base cloth or like leather REAR SOFA SEAT - power base cloth or like leather RECOVER REAR FACTORY SEAT-LEATHER 6-WAY POWER SEAT BASE - DRIVER 6-WAY POWER SEAT BASE - PASSENGER WOOD FLOOR CONSOLE WITH: high gloss-high performance finish DRINK HOLDERS AND STORAGE OVERHEAD WOOD CONSOLE: high gloss-high performance finish CB RADIO - with weather channel RADAR DETECTOR - with laser escort 8500 REAR SEAT ENTERTAINMENT SYSTEM GAUGE PACKAGE - pyrometer & turbo boost STEREO SYSTEM EQUALIZER HITCH REAR BUMPER HD BLACK REAR ROLL PAN MUDFLAPS, BRACKETS, WEIGHTS, ANTI-SAILS BED SIDE PROTECTORS - PAINTED HEADACHE RACK WITH LIGHTS TAIL GATE RUBBER RUBBER BED MAT BED LINER FIBERGLASS GROUND EFFECTS RUNNING BOARDS DIAMOND PLATE OR EXTRUDED ALUMINUM RUNNING BOARDS FRONT & REAR STAINLESS STEEL RUNNING BOARDS FRONT & BACK RUNNING BOARD LIGHTS SUN VISOR FRONT SPOILER VENT SHADES REAR CAB DEFLECTOR HOOD PROTECTOR BILLET GRILL TOW HOOKS CLEAR COAT CUSTOM PAINT ALUMINUM WHEELS - (4) Rhino Liner Box tops ALUMINUM AUXILIARY FUEL TANK 90 Gal W/TOOL BOX W/SWITCHING VALVE AIR RIDE WITH ON BOARD COMPRESSOR and GAUGE This is a very rare Truck, especially in the 4x4 / 200” WB configuration. 909 829 1140 R&B Auto and Truck Center – open 7 days a week 8am to 9pm Est. 1985 16020 Foothill Blvd. Fontana, CA 92335 Certified Master Dealer- NIADA AAA Certified Service Provider A+ Rating with BBB

    $50,000.00

    Fontana, California - US

  8. Ford F 550 4x4 Crew Cab w/ 200’’ wheel base 2007 FORD F550 4x4 Custom LARIAT HAULER (45,650 original miles) with ALUMINUM Bed ( Financing is available / trade ins ok Available right now at: R & B Auto Center 16020 Foothill, Fontana 1 owner (custom build) Diesel Custom Leather New Radial Tires Custom Interior 5th Wheel Hitch Loaded (every option avail… windows, locks, cruise, tilt 4X4 - 200" WB Utility Bodyworks Custom Elite 84 Aluminum Haul Be 45,464 original miles 50 gallon spare fuel added to 41 gal factory = 91 gal total diesel fuel Thelma Drive-line Retarder Reyco Granning Air Suspension Custom Roper Leather Carbon Fiber dash and consoles head & center Pioneer AVIC-Z1 : rear seat TV monitor, Sat Radio Electric fold down rear sleeper bed roper leather interior, Thelma driveline retarder HAULER BED includes: Rhino lined , mud flaps, aluminum fenders, complete trailer hookup, spare tire, tool boxes, headache rack with lights, installed, undercoated, painted to match truck. WINDOW TINT RECOVER FACTORY SEATS - front & rear CUSTOM BUCKET SEATS - power base cloth or like leather REAR SOFA SEAT - power base cloth or like leather RECOVER REAR FACTORY SEAT-LEATHER 6-WAY POWER SEAT BASE - DRIVER 6-WAY POWER SEAT BASE - PASSENGER WOOD FLOOR CONSOLE WITH: high gloss-high performance finish DRINK HOLDERS AND STORAGE OVERHEAD WOOD CONSOLE: high gloss-high performance finish CB RADIO - with weather channel RADAR DETECTOR - with laser escort 8500 REAR SEAT ENTERTAINMENT SYSTEM GAUGE PACKAGE - pyrometer & turbo boost STEREO SYSTEM EQUALIZER HITCH REAR BUMPER HD BLACK REAR ROLL PAN MUDFLAPS, BRACKETS, WEIGHTS, ANTI-SAILS BED SIDE PROTECTORS - PAINTED HEADACHE RACK WITH LIGHTS TAIL GATE RUBBER RUBBER BED MAT BED LINER FIBERGLASS GROUND EFFECTS RUNNING BOARDS DIAMOND PLATE OR EXTRUDED ALUMINUM RUNNING BOARDS FRONT & REAR STAINLESS STEEL RUNNING BOARDS FRONT & BACK RUNNING BOARD LIGHTS SUN VISOR FRONT SPOILER VENT SHADES REAR CAB DEFLECTOR HOOD PROTECTOR BILLET GRILL TOW HOOKS CLEAR COAT CUSTOM PAINT ALUMINUM WHEELS - (4) Rhino Liner Box tops ALUMINUM AUXILIARY FUEL TANK 90 Gal W/TOOL BOX W/SWITCHING VALVE AIR RIDE WITH ON BOARD COMPRESSOR and GAUGE This is a very rare Truck, especially in the 4x4 / 200” WB configuration. 909 829 1140 8am to 9pm Est. 1985 16020 Foothill Blvd. Fontana, CA 92335
  9. 41 ft "Travel Supreme" in pristine condition( Financing avail) View Advert 2007 Travel Supreme Rally Sport 41ft Custom • Financing is avail • Delivery is also avail ( Glamis Delivery also avail) VIN: 41KFW413775000123 excellent Cond - always maintained & serviced One owner - no rust fuel: diesel Generator 250 hours ex color: white RV type: fifth wheel trailer Length 41 ft title clean /clear Video on request TOY HAULER RALLY SPORT at $29,000. it is priced well below NADA RETAIL ( $100K originally invested ) see build sheet in images New Tire’s Spec’s: _________________________________________________________________________________________________ 5TH WHEEL - 2007 TRAVEL SUPREME 41KST12 CUSTOM Model: RALLY SPORT (CUSTOM BUILT) TOY HAULER-GVWR 21000 LBS - 5TH WHEEL (CUSTOM FULL 3-AXLE MOR-RYDE SUSPENSION) GENERATOR: DIESEL ONAN 8 KW QUIET series (only 210 hours ) *SEE PHOTO SPEC SHEET FOR CUSTOM & UPGRADED FEATURES/INCLUDED OPTIONS FRESH: 110 Gallons Gray: 55 Gallons Black: 55 Gallons LP Tank: 2X40LBS Water Heater: 12 Gallon GAS/ELECTRIC COMBO Furnace: 42,000 BTU FUEL PUMP STATION Capacity: 25 Gallons 15,000 BTU A/C-HEAT PUMP DUCKED PRE-WIRE 2ND A/C HEAT PUMP GARAGE PRE-WIRE SOLAR PANELS BEDS: 3 QUEEN (SLEEPS 6) 30 Foot Shore 50AMP Power Cord OTHER CUSTOM FEATURES / CUSTOM UPGRADES: TRIPLE 8000 LB AXLES / DEXTER SELF ADJUST BRAKES - NEVER.LUBE HUBS DOMESTIC STAINLESS DOUBLE DOOR RE FRIG & ICE MAKER W/FLUSH OPTION FLAME TEX FIREPLACE 1500 WATT VARIABLE HEAT OPTION / BRASS BOW FP COVER FISHER PAYKEL STAINLESS DISHWASHER GE SS ADVANTIUM CONVECTION WALL OVEN COMBINATION MICROWAVE STAINLESS STEEL (with Convection / Speed-cook, and Micowave combination modes.. SAMSUNG PLASMA TV UPGRADES 32in & 19in WITH SURROUND SOUND SYSTEM KING DOME IN-MOTION SATELLITE DOME W/RAPID CABLE CONNECT TO TOW VEHICLE HDTV CORIAN CUSTOM COUNTERS THROUGHOUT KITCHEN & BATH CERAMIC TILE UPGRADE BOTH KITCHEN & BATH WEATHER PRO SIDE AWNING W/REMOTE CENTRAL VACUUM CHERRY STAINED HARDWOOD CABINETS DINETTE CUSTOM CHERRY HARDWOOD UPGRADED KITCHEN CHERRY ISLAND SPLENDIDE WASHER DRYER IN MASTER CLOSET 2 FEET ADDED TO GARAGE (TOTAL 8'X12')--CYCLE/CARGO TIE DOWNS RAILS W/WHEEL CHOCKS.... ALL THROUGH BOLTED TO FRAME CHERRY HARDWOOD CABINETRY 25 GAL FUEL PUMP STATION REAR B/U CAMERA WITH CABLE PRE-WIRE TO TOW VEHICLE HDTV SCREEN REAR PULL DOWN SCREEN INSULATION COMPLETE UNDER BELLY UPGRADE PACKAGE CUSTOM -- 12 foot Garage instead of standard 10 foot...Rally Sport Fifth Wheel Series M-41 KS-T12 All the interior Upholstery have been “steam cleaned” and bedding taking to professional Laundry company to sterilize. ______________________________________________________ $29,700 Financing is available 9o9 829 1140 909 478 4791 Text R&B Auto and Truck Center Est. 1985 16020 Foothill Blvd. Fontana, CA 92335 Certified Master Dealer- NIADA AAA Certified Service Provider A+ Rating with BBB This same Coach would cost over $130,000 now and take 6 months to take delivery We also have a selection of Trucks to tow this Advertiser bob@randbtruckcenter.com Date 11/07/2019 Price $29,900.00 Category RV's and Trailers For Sale  
  10. This advert is COMPLETED!

    • FOR SALE
    • USED

    2007 Travel Supreme Rally Sport 41ft Custom • Financing is avail • Delivery is also avail ( Glamis Delivery also avail) VIN: 41KFW413775000123 excellent Cond - always maintained & serviced One owner - no rust fuel: diesel Generator 250 hours ex color: white RV type: fifth wheel trailer Length 41 ft title clean /clear Video on request TOY HAULER RALLY SPORT at $29,000. it is priced well below NADA RETAIL ( $100K originally invested ) see build sheet in images New Tire’s Spec’s: _________________________________________________________________________________________________ 5TH WHEEL - 2007 TRAVEL SUPREME 41KST12 CUSTOM Model: RALLY SPORT (CUSTOM BUILT) TOY HAULER-GVWR 21000 LBS - 5TH WHEEL (CUSTOM FULL 3-AXLE MOR-RYDE SUSPENSION) GENERATOR: DIESEL ONAN 8 KW QUIET series (only 210 hours ) *SEE PHOTO SPEC SHEET FOR CUSTOM & UPGRADED FEATURES/INCLUDED OPTIONS FRESH: 110 Gallons Gray: 55 Gallons Black: 55 Gallons LP Tank: 2X40LBS Water Heater: 12 Gallon GAS/ELECTRIC COMBO Furnace: 42,000 BTU FUEL PUMP STATION Capacity: 25 Gallons 15,000 BTU A/C-HEAT PUMP DUCKED PRE-WIRE 2ND A/C HEAT PUMP GARAGE PRE-WIRE SOLAR PANELS BEDS: 3 QUEEN (SLEEPS 6) 30 Foot Shore 50AMP Power Cord OTHER CUSTOM FEATURES / CUSTOM UPGRADES: TRIPLE 8000 LB AXLES / DEXTER SELF ADJUST BRAKES - NEVER.LUBE HUBS DOMESTIC STAINLESS DOUBLE DOOR RE FRIG & ICE MAKER W/FLUSH OPTION FLAME TEX FIREPLACE 1500 WATT VARIABLE HEAT OPTION / BRASS BOW FP COVER FISHER PAYKEL STAINLESS DISHWASHER GE SS ADVANTIUM CONVECTION WALL OVEN COMBINATION MICROWAVE STAINLESS STEEL (with Convection / Speed-cook, and Micowave combination modes.. SAMSUNG PLASMA TV UPGRADES 32in & 19in WITH SURROUND SOUND SYSTEM KING DOME IN-MOTION SATELLITE DOME W/RAPID CABLE CONNECT TO TOW VEHICLE HDTV CORIAN CUSTOM COUNTERS THROUGHOUT KITCHEN & BATH CERAMIC TILE UPGRADE BOTH KITCHEN & BATH WEATHER PRO SIDE AWNING W/REMOTE CENTRAL VACUUM CHERRY STAINED HARDWOOD CABINETS DINETTE CUSTOM CHERRY HARDWOOD UPGRADED KITCHEN CHERRY ISLAND SPLENDIDE WASHER DRYER IN MASTER CLOSET 2 FEET ADDED TO GARAGE (TOTAL 8'X12')--CYCLE/CARGO TIE DOWNS RAILS W/WHEEL CHOCKS.... ALL THROUGH BOLTED TO FRAME CHERRY HARDWOOD CABINETRY 25 GAL FUEL PUMP STATION REAR B/U CAMERA WITH CABLE PRE-WIRE TO TOW VEHICLE HDTV SCREEN REAR PULL DOWN SCREEN INSULATION COMPLETE UNDER BELLY UPGRADE PACKAGE CUSTOM -- 12 foot Garage instead of standard 10 foot...Rally Sport Fifth Wheel Series M-41 KS-T12 All the interior Upholstery have been “steam cleaned” and bedding taking to professional Laundry company to sterilize. ______________________________________________________ $29,700 Financing is available 9o9 829 1140 909 478 4791 Text R&B Auto and Truck Center Est. 1985 16020 Foothill Blvd. Fontana, CA 92335 Certified Master Dealer- NIADA AAA Certified Service Provider A+ Rating with BBB This same Coach would cost over $130,000 now and take 6 months to take delivery We also have a selection of Trucks to tow this

    $29,900.00

    Fontana, California - US

  11. Hello Shane.

    Hope all is well.

    The International Crew Cab is still available.

    Its on www.racedezert.com

    Here is Link to 50 images of the 2012 International Crew Cab

     

    https://classifieds.race-dezert.com/FOR_SALE:International-Custom-Crew-Cab-Luxury-Heavy-Hauler-%E2%80%93-extremely-rare-158826

    Call me direct anytime 909 478 4791

    909 829 1140

    R&B Auto and Truck Center

    Est.  1986

    16020 Foothill Blvd.

    Fontana, CA 92335

     

    We also have a 2014 arriving next week

     

    i48.jpg

    icover main.jpg

    icover5.jpg

    icover6.jpg

    icover7.jpg

    icover8.jpg

  12. Subject: 2007 Travel Supreme Rally Sport 41ft Custom $29995. 2007 Travel Supreme Rally Sport 41ft Custom in pristine condition · All Upholstery has been steam cleaned (receipts avail) · All “Bedding” has just been professionally Laundered (receipts avail) · This Coach has been completely detailed and serviced · Financing is avail · Delivery is also avail ( Glamis Delivery also avail) VIN: 41KFW413775000123 condition: excellent cylinders: 8 cylinders diesel Generator 250 hrs rv type: fifth wheel trailer Legnth 41 title clean TOY HAULER RALLY SPORT at $29,995. it is priced well below NADA RETAIL ( $100K originally invested ) see build sheet in images New Tire’s Spec’s: Build sheet avail:_________________________________________________________________________________________________ 5TH WHEEL - 2007 TRAVEL SUPREME 41KST12 CUSTOM Model: RALLY SPORT (CUSTOM BUILT) TOY HAULER-GVWR 21000 LBS - 5TH WHEEL (CUSTOM FULL 3-AXLE MOR-RYDE SUSPENSION) GENERATOR: DIESEL ONAN 8 KW QUIET series (only 210 hours ) *SEE PHOTO SPEC SHEET FOR CUSTOM & UPGRADED FEATURES/INCLUDED OPTIONS FRESH: 110 Gallons Gray: 55 Gallons Black: 55 Gallons LP Tank: 2X40LBS Water Heater: 12 Gallon GAS/ELECTRIC COMBO Furnace: 42,000 BTU FUEL PUMP STATION Capacity: 25 Gallons 15,000 BTU A/C-HEAT PUMP DUCTED PRE-WIRE 2ND A/C HEAT PUMP GARAGE PRE-WIRE SOLAR PANELS BEDS: 3 QUEEN (SLEEPS 6) 30 Foot Shore 50AMP Power Cord OTHER CUSTOM FEATURES / CUSTOM UPGRADES: TRIPLE 8000 LB AXLES / DEXTER SELF ADJUST BRAKES - NEVER.LUBE HUBS DOMETIC STAINLESS DOUBLE DOOR REFRIG & ICEMAKER W/FLUSH OPTION FLAMETEX FIREPLACE 1500 WATT VARIABLE HEAT OPTION / BRASS BOW FP COVER FISHER PAYKEL STAINLESS DISHWASHER GE SS ADVANTIUM CONVECTION WALL OVEN COMBINTION MICROWAVE STAINLESS STEEL (with Convection / Speed-cook, and Micowave combination modes.. SAMSUNG PLASMA TV UPGRADES 32in & 19in WITH SURROUND SOUND SYSTEM KING DOME IN-MOTION SATELLITE DOME W/RAPID CABLE CONNECT TO TOW VEHICLE HDTV CORIAN CUSTOM COUNTERS THROUGHOUT KITCHEN & BATH CERAMIC TILE UPGRADE BOTH KITCHEN & BATH WEATHER PRO SIDE AWNING W/REMOTE CENTRAL VACUUM CHERRY STAINED HARDWOOD CABINETS DINETTE CUSTOM CHERRY HARDWOOD UPGRADED KITCHEN CHERRY ISLAND SPLENDIDE WASHER DRYER IN MASTER CLOSET 2 FEET ADDED TO GARAGE (TOTAL 8'X12')--CYCLE/CARGO TIE DOWNS RAILS W/WHEEL CHOCKS.... ALL THROUGH BOLTED TO FRAME CHERRY HARDWOOD CABINETRY 25 GAL FUEL PUMP STATION REAR B/U CAMERA WITH CABLE PRE-WIRE TO TOW VEHICLE HDTV SCREEN REAR PULL DOWN SCREEN INSULATION COMPLETE UNDER BELLY UPGRADE PACKAGE CUSTOM -- 12 foot Garage instead of standard 10 foot...Rally Sport Fifth Wheel Series M-41 KS-T12 All the interior Upholstery have been “steam cleaned” and bedding taking to professional Laundry company to sterilize. ______________________________________________________ $29,995 Financing is available Here is Link to 24 image's: inlandempire.craigslist.org/trb/d/fontana-2007-travel-supreme-rally-sport/7007372599.html It should also be live on Race Dezert in a few hours
  13. This advert is COMPLETED!

    • FOR SALE
    • USED

    2016 CRF 450r Very low hours in show condition Oil changed after every 2-3 rides with synthetic oil DNA racing wheels with newer tires(some knobbies still have nipple marks) Spare set of stock complete wheels with brand new paddle FMF megabomb exhaust Sunline levers with perch IMS 3.2 gallon desert tank Rekluse auto clutch Twin air filter with dust cover twin air air box cover Polli sport disc + fork guard BRP bar risers Hard line hour meter Tusk racing digital suspension pump Many more extras $5800. DM me for Video 909 809 7214

    $5,800.00

    Irvine, California - US

More Links

©2001 GlamisDunes.com.
All rights reserved.

×
×
  • Create New...