JM PRO's latest activity
-
JM PRO replied to the thread The official Honda Thread.I would choose the turbo that spools earlier. I am rarely over 5500rpm. -
JM PRO replied to the thread The official Honda Thread.What you are suggesting to do would be okay for a non turbo pump gas application. If you go turbo or E85 I suggest modifying the fuel...
-
Final numbers from today on Dardan’s dyno. 14lbs of boost. Very conservative tune.
-
JM PRO replied to the thread How to bleed cutting brakes?.Getting the air out of the system can be a total Beotch. I have battled this on a couple cars after adding turn brakes. Traditional...
-
JM PRO replied to the thread Lessons Learned from a Life-Threatening Accident.Was he wearing a helmet? If he was not, do you think just a helmet would have prevented his injuries? Or he was wearing a helmet and...
-
JM PRO replied to the thread Rear hub upgrade.Rbp micro super 99 uses the timken 515006 bearing. They are very affordable. The OD of the wheel flange needs to be turned down to fit...
-
JM PRO replied to the thread Rear hub upgrade.But the 3.90" bearing and a huge 36" size paddle and how heavy of a car???
-
JM PRO replied to the thread Rear hub upgrade.The problem is the 3.60" size bearing. Regardless of spline the 3.60" size bearing is the weak link. Big upgrade from the 3.6 to the 3.9...
-
JM PRO replied to the thread Rear hub upgrade.I agree with the Gear One customer service and quality. I had a old set of Mid boards and they helped me get them back in action. Only...
-
JM PRO replied to the thread Rear hub upgrade.No input on your question concerning the different mid boards. My questions is why are you doing the upgrade? What are you trying to...
-
JM PRO replied to the thread Mac's Car Refresh.I am not tracking 100%. Do you have a pic of what your talking about?
-
JM PRO replied to the thread Extreme Performance DR1 New Build.Are you planning on adding a turn brake?
-
JM PRO replied to the thread Extreme Performance DR1 New Build.I Duned all weekend with a new DR1 extreme car. Car had an LS3 and duned really well. Looked stable and turned well in tighter turns and...
-
JM PRO replied to the thread Camber angle on front of sand rail?.If the car doesn't seem to turn as easy, check your toe. I run 1/4" toe out front and rear. Helps the car to turn more easily. The...
-
JM PRO replied to the thread disc brakes.Try CMS in Santa Fe springs Custom Metal Spinning 8248 Allport Ave, Santa Fe Springs, CA 90670 (562) 696-3602
