Search results

That Corvette bump steer kit I bought had a big tall lock nut. At least with this spacer in it and guessing at the bumpster right now the lock nut portion was not even on the threads. So I bought some thinner nuts, red locted it, and double nutted it. Other option at some point when I have...

Then these pics show with air out of the bags in the tire at full compression. Pretty steep angle I move that sway bar forward three quarters of an inch which of course changed the angle drastically on these tie rod links. Probably need to buy an aftermarket straight tie rod link and then use...

These two pics show the angle of the sway bar link with the truck at ride height not too bad.

Whole lot of work for something that may or may not work. Don't know till you try though. If I have to custom build a sway bar for the front it will be quite a project. Shortening this thing 10 in I'm guessing it might be too stiff. Track width on this is only 62 and 1/2 in. Pretty damn narrow...

27th avenue and Indian School. The truck is probably somewhere in the high 3000s could possibly be pushing 4,000 lb. The other cars are all going to be lighter. 62 Corvette that's probably $3,200 lb, my Funco which I always wanted to know the weight and while I'm doing this, and then the 31...

Have 4 cars I want to weigh. Specifically my Dodge truck. Anyone know where I can rent or borrow a set of corner scales?

Need my moms house painted in Trilogy Peoria area. 125th ave and Happy Valley. Anyone have someone they trust. Thanks

This movie not only has never before released interviews with John Bonham but also they do full classic songs live from the first two albums. The whole song for each. I watch a lot of different old music documentaries and this is absolutely one of the best ever put together. It is amazing the...

Wish I could have seen them live.

Saw this in Imax today. First ever authorized bio on the band. Excellent!!!

Cool

VIN tag attached. Now it is legit. LOL

Throttle pedal has a lot of travel and not as comfortable as I would like when pushing down at full throttle. So this morning on the mill I whittled out a toe block from aluminum. Just add paint.

https://glamisdunes.com/threads/fire-extinguisher-for-your-hot-rod-or-off-road-vehicle.10396/. I bought three of them.

Super cool.

I have no idea how this is going to work but I took 10 inches out of the stock front Corvette sway bar. Certainly will make it stiffer but the truck is heavier as well. Put a piece of 5/8 solid steel rod pressed in both sides. Seven or eight rossette welds in each side. And two roll pins in each...

That is cool!

Been thinking for a long time how I wanted to seal the floor where the steering shaft comes through. Found this cool guy bearing and ordered it. 35 degrees of tilt for the Spherical Bearing.

Drilled out a couple of 20mm tracer rounds and mounted on my truck in lieu of windshield wipers.

Lots of shells, bullets, and clips found years ago across the other side of the canal. Painted them up and they have glamis sand inside for powder.