Search results

Actually what I have is going to work just fine and the 2x would not be necessary. Not going to be running AC units because my panels and battery Bank are not big enough for that. Right now there is a 30 amp breaker going to the old inverter. Plan is to change that to a 50. Then go to a subpanel...

18500

.

Well I'm glad I have some help to install all of this. Looks like I bought the wrong inverter which has now been 2 months from Amazon and I can't return it. Should have bought the 2x unit because this is a 50 amp coach. It does 240 volts which this will only do 120.So we are going to have to get...

My daughter was there and said even with it as wet as that video shows it dried out by the next day to go out and do everything they wanted to do. Still a heck of a mess though.

Roughly an hour and a half using a disc grinder and sandpaper to take a quarter inch off that left side. Fridge should fit in there good. May still have to make some sort of small trim to go around it.

I have two good size filters coming to vent this box. Haven't figured out what fan to buy yet and put inside for air movement.

Toggle switch on the bottom of the inverter that I think I will remount outside the box.

The big 4/0 cables that came out of it are probably seven or eight feet long. They will need to be shortened way up. The sheathing still looks good so I don't see why I can't shorten them and just put a new end on one end each cable.

Crap that was a project. Ready for a break. Got out the POR 15 and painted the battery Bay after wire brushing the heck out of it. That is some of the nastiest stuff known to man. Always seems to be the place that these older motorhomes want to start to rust. And as much weight is on those...

Wow

I have sold a lot of stuff on marketplace over the years and this made me laugh. https://www.facebook.com/share/16AWHneFH7/

So this new fridge is about 24 and 1/16 wide. The opening is right at 24 in. So I have to scrape out all the styrofoam. And then that trim piece to the left I need to figure out how to shave 3/16 off of it in a nice straight line. Haven't quite figured out how to do that with the tools that I have.

After 3 hours and the fridge is cooled down inside. This is just sitting in the shop and even with the coolers blowing it's still probably 90 in here.

I had just looked at the inverter and never measured it. When I started I made that box 24 in tall. Realized that I needed room for my wires coming in underneath so I added 2 inch extensions to each of the four uprights. A little extra welding and grinding. LOL

This is a big project. Lot of work already. Long way to go.

Yep

Kind of what I figured. This should work very well. Sucker cools down quick.

Well the tag says 1.2 amps. Let's put a meter on it and see what it actually draws.