Search results

I don't have a DD prerunner, just the regular sand car w/o the full front bulkhead a-arms. not as heavy as your either... But maybe this will help - I had to lower the car about 2" from where it was and installed a sway bar. it doesn't slide on power that good, but as soon as you let off it...

Didn't do crincle. block went satin VHT rattle can, everything else was powder coated gloss or satin black. looked good! held up well.

I've had good luck with the pelican style boxes from Harbor Freight. you do need to put some vent holes in them as the relays do get warm. My car has a separate panel under the seat that is easily un screwed from the bottom of the car, it hinges down and is easy to get to if there was ever an issue.

Thanks EastMT, I believe you and I traded some trans parts a few years back and had some good calls on Honda parts or suspension. the little box on below the radiator is a Pro-Taper hour meter, this is made for dirt bikes and uses vibration to clock actual run hours, these are pretty inexpensive...

Thanks! Flat panels we can do, we have a 5ft sheer and bead roller. we can probably pull off a hood and may make a deal on the first one since we'd be learning.

This is the LS in my car, what it was when i bought it, to what it is now after some powder coat and pretty parts! same car posted with the Pie cut exhaust. Fresh bumper:

Full car re-model over summer. stripped down, added intrusion bars, updated front bumper, went from a 091 to a 2d and we rebuilt chassis from B-pillar back, all Tig. car had a nice out front 2.5 engine and nice engine harness, rest of the car was a basket case and got a complete re-wire, new...

pivot tube repair, reinforcement Uprights chromo

Hello GD members, My son and I have been doing quite a bit of side work over the last several years we are thinking we might turn this into something! For a little background, I was an heavy equipment tech for 20 plus years, specializing in wiring and heavy diesel engines, I now manage a large...

I had a FS3400 bumper pull, it fit a 4 seat Buggy Works backed in with 2 dirt bikes pretty easily with the 17ft open layout. I had to back in and get the rear loading tires all the way to the cabinets, engine cage between fridge and counter. I did have to change to some narrower headers. This...

Sold it. thanks

yes. I went from a Honda to LS and use the same starter.

SOLD Helping a buddy sell his RZR please text or call 9165845513 for more info or photos. I don't get notifications on responses or DMs on GD anymore for some reason. 2020 Rzr turbo S. This car only has 1500 miles and looks new. its a great car that already has $10K+ in safety upgrades. car is...

I had a 07 FSW 34 that measured 42' from ball to rear. I hung a load cell from my forklift and the actual tongue weight was 2550 with roughly 100 gallons of water, no sand car or dirt bikes. In the 6 years I owned it I went thru 2 class 5 truck hitches due to wear in the pin and also cracked one...

on my 4th season with a red top, never charge it, rarely start it between trips. way better than the 2 little guys that were in the rear. to make it fit and accessible I did have to re-locate battery to in front of passenger foot well, that allowed me to put a master switch under dash that I...

I put some Mickey Thompson tubes in and never looked back. was tired of the leaking and checking PSI every morning, my new Blaster 33's actually leaked around some of the lettering and it didn't matter what combo of chemicals I tried. cleaning the goop up off the floor of my trailer when the...

My car feels about the same, exact off power, on power it has more push than I like. I do have a sway bar and that was a game changer, definitely the best modification I made. Was able to soften the bypasses to make the chop more tolerable and not get body roll.

update.. The Honda was sold, LS built and installed over the summer. money wise, kinda stopped keeping track but was less than 10k I know that... more than expected but did get good money out of parting out the Honda. and got a good deal on a Turnkey built LS6. so overall cost was within the...

My car runs similar setup but with a terminator X, pro dash, and the MSD solid state relay pack. simplicity was the goal when I re-wired it last summer. Switch pros 8 button runs ignition, starter, 5 light circuits, and coms. The switch pro unit lives under the dash closest to the lights/coms...

Most of my group has them, no one uses them. its an expensive GPS speedometer!