Search results

injectors on race fuel are probably fine i would start it up first the pre filter that we use is a 1/2" push on nipple both sides 100 micron $15

great end to the story again if he's leaving it in storage...leaving lots of lug nuts off is a great deterrent

Congrats. What kind of fuel? You should change fuel filters once a year at a minimum. Plug type is importsnt snd max gap at .025”

Honey do’s are always first on Saturday so just put the sliding organizers in the pantry. Just got 6 done and my wife has just informed me she ordered 8 more!

The word "queue" is ironic. It's just a Q with a bunch of silent letters waiting in line.

cool!

i forwarded the info thanks

We had to raise the rpm with 6 cylinder too

the new one? i have never seen it. its in Vegas

their previous car was a subaru with a small blower(i didnt set it up) they wanted it to be turbo and there was just too much cost involved to convert to turbo so he bought a different car and did not know i dont do hondas--thats how it got here

Last Friday was out in the dunes and one of my friends had a rear control break open. The rear arm went sideways. We were 5 miles from camp and had lots of guys and tried to lift the rear end of the car--no way!!. The bracket found its way below the bolt. Have had an exhaust jack i bought years...

there are ground loops possible with some ecus. all powers must come from a "main relay" post ecu. so the switch pro should only power up the ecu input (nothing else) it would be common for folks to have this same wire power up the ecu also give power to the 86 coil side of the relays--you...

i dont know these guys or their contact info if you could please provide, then i will pass it on to my customer thanks

on post 152 10th pic there is a bolt hole in the side of the block that should be siliconed closed (both sides) or it lets sand in the bellhousing area

I have a customer that just bought a V6 turbo Honda project with DBW throttle and a fuel tech ECU. They are out of Vegas. I was wondering if any of you know someone that works with Fuel Tech ecus, tuning and or Honda that would want to take on a project like this??

I have a brand new kit. Normally $530 for $400. Flywheel, plate and hardware

Went to Mexico for a 1300 mile SXS ride a few weeks ago. 11 cars. One was a speed. I was concerned going 600 miles south of the boarder was not a good idea for him. But he had a great trip. He left the trip and drove asphalt for the last 300 miles because another guy had to leave trip early. I...

(y)

just because the tranny was rebuilt doesn't mean the shifter is set up correctly, the stops set right, or the cables are not what they should be have those checked out before you get another $5k tranny build

Subaru and S5, i use the clutch every shift, its just easier on my brain and my tranny. sure i could shift with the best of them without a clutch but i feel using the clutch is a slam dunk on every shift.