Will it fit in the T/H?

[Get415]

Anybody able to fit a Turbo r4 in a 13ft garage model toy hauler? I currently have a turbo s 4 but i belive the R amd new Pro s are quite a bit larger. Thx

 

[Sand Shark]

I believe the 4 seat Turbo R/Pro S is a around 13' 1" long.

 

[Crusty]

2026 Polaris RZR Pro R
Overall Length: 136.5 inches (\(347\) cm)
Overall Width: 74 inches (\(188\) cm)
Overall Height: 72.8 inches (\(185\) cm)
Wheelbase: 104.5 inches (\(265.4\) cm)

2026 Polaris RZR Pro S
Overall Length: 128 inches (\(325\) cm)
Overall Width: 74 inches (\(188\) cm
)Overall Height: 74.4 inches (\(189\) cm)
Wheelbase: 96 inches (\(244\) cm)

 

[Toy Collector]

There's always a solution...

https://a1trailerrepairandwelding.com/toy-hauler-trailer-extensions/

 

[FOG]

If it’s just an inch or two, let some air out of the tires and ratchet it up tight against the front wall and slam the rear door shut.
No need for tie downs.

 

[RiverDave]

If it’s just an inch or two, let some air out of the tires and ratchet it up tight against the front wall and slam the rear door shut.
No need for tie downs.

I like the way you think!

 

[Toy Collector]

If it’s just an inch or two, let some air out of the tires and ratchet it up tight against the front wall and slam the rear door shut.
No need for tie downs.

Those are the specs in Stock Tire trim.

Sand tires change those dimensions. That was the case on my XP4 900, anyway.

He's probably going to need another 4-6 inches (some of you may have heard this one before... ).

 

[RIDERED]

With enough horsepower anything will fit.

 

[Get415]

Challenge accepted. Thanks for the info gents