Fuel Transfer Tank For the Dunes

[cek]

Looking for a truck bed transfer tank to use to refill biggies at the dunes. Would like to find 75 gallons or so that would fit under a tonneau cover. Anyone have any suggestions?

Under the tonneau cover is a must.

 

[Justdirt]

Try cal ranch , tractor supply or northern tool

 

[Justdirt]

Try cal ranch , tractor supply or northern tool

In Oregon costal farm

 

[cek]

Appreciate it but I’m looking for someone who has used one and knows it will fit under the cover. I have a transferflow tank that should fit by their dimensions but they don’t count the filler neck in their measurements.

 

[GmFamBam]

Buddy bought this and used it this season. It fits under his cover on his Silverado

https://a.co/d/4kVmU6C

 

[L.R.S.]

I'm in the same situation. I've always had a transfer or auxiliary tank for diesel in my truck bed. My new truck has a folding bed cover and I like it. My buddy had a bulk refueling business (where Balin works now) and he said he can get me a tank that will fit under the be cover. It needs to be under 22" and I will have a 3/8" NPT fitting on the bottom and run a small pump to my trucks fuel tank. I'm not going to have a transfer pump because that will be too tall. I'll let you know what I end up with.

 

[Jersey_Jeff73]

Appreciate it but I’m looking for someone who has used one and knows it will fit under the cover. I have a transferflow tank that should fit by their dimensions but they don’t count the filler neck in their measurements.

i have the 109 gallon transfer flo it does not fit under the cover unless you drill a hole for the filler neck. i drilled the hole in my cover i love it i dont have to take the cover off to fill and have a long hose so just open the gate and refuel. i have a folding bed cover and the first piece is about 8 inches and the hole is in the middle of that and when you fold it up the last fold flat is over the tank

 

[megadesertdiesel]

You need a custom tank. I built a 60 gallon tank a few years ago. I could not find anything that would fit under the rolling cover either.

 

[cek]

i have the 109 gallon transfer flo it does not fit under the cover unless you drill a hole for the filler neck. i drilled the hole in my cover i love it i dont have to take the cover off to fill and have a long hose so just open the gate and refuel. i have a folding bed cover and the first piece is about 8 inches and the hole is in the middle of that and when you fold it up the last fold flat is over the tank

That’s the one I was looking at. Wonder if I could cut the neck off and make it flush mounted.

 

[cek]

You need a custom tank. I built a 60 gallon tank a few years ago. I could not find anything that would fit under the rolling cover either.

View attachment 140526


View attachment 140527View attachment 140528

I like that. I could just mount a pump remotely.

 

[megadesertdiesel]

I like that. I could just mount a pump remotely.

For sure, i drilled a hole in the bed and use it gravity feed into the filler neck with a 12v gate valve.

 

[Jersey_Jeff73]

That’s the one I was looking at. Wonder if I could cut the neck off and make it flush mounted.

probably not the tank is only a 1/2 inch below the cover on a 17 f450

 

[honEXduner]

I had KSH in Havasu quote a tank few years back but my plans changed. Seems they build to suit.