Stinky
Well-known member
- May 9, 2021
- 650
- 275
On my '89 Warrior....it spit out the needle bearings on the rod's wrist-pin and we sent it off to be rebuilt. We are putting it in now. We've stumbled onto something that we don't know where it goes.
The back of the bike is at the top and the left side of the bike is on the right side....in the pictures.
Under the air box, on the left side of the frame (1st picture) is a a wiring loom (w/the big white clip on it)....there is a light blue wire that comes out of it (3rd picture), it goes about 3" and then there is a junction. At the junction it changes to a solid green color and then goes inside a black sheath. The end is over by the exhaust pipe. The end is in the middle picture.
You can see, it is pretty long, as it looks all over the place.
We don't know where it goes....the guy that took it apart was on a roll and didn't pause to take pictures (twernt me).
It doesn't go to the reverse lever or the neutral sensor.
My manual doesn't really help me.
If you have a Warrior, can you help a body out....Please and Thank You.
The back of the bike is at the top and the left side of the bike is on the right side....in the pictures.
Under the air box, on the left side of the frame (1st picture) is a a wiring loom (w/the big white clip on it)....there is a light blue wire that comes out of it (3rd picture), it goes about 3" and then there is a junction. At the junction it changes to a solid green color and then goes inside a black sheath. The end is over by the exhaust pipe. The end is in the middle picture.
You can see, it is pretty long, as it looks all over the place.
We don't know where it goes....the guy that took it apart was on a roll and didn't pause to take pictures (twernt me).
It doesn't go to the reverse lever or the neutral sensor.
My manual doesn't really help me.
If you have a Warrior, can you help a body out....Please and Thank You.
Attachments
Last edited:
