Funco GEN 4 rear centerboard hubs, brakes, bearings, etc What is it worth??

onanysunday

onanysunday

Well-known member
Joined
May 7, 2021
Messages
3,523
Reaction score
3,366
From my Gen 4. Bearings and races still good and serviceable. Includes new set of brake pads and new CR seals. I switched over to a micro stub setup. I believe these were gray area hubs? I also have a box of 930 CVs somewhere and can probably put together a set of 4. One of the 6 bolt CV boot retainers is damaged and can be massaged and repaired or replaced. What is it worth??

20210817_112652 (1).jpg

20210817_112656.jpg

20210817_112701.jpg

20210817_112703 (1).jpg

 
Not sure what it's worth, but I'd throw $100 at it just to have spares in my garage and to help you get it out of your garage.

 
AlpineFunco said:
Not sure what it's worth, but I'd throw $100 at it just to have spares in my garage and to help you get it out of your garage.
Click to expand...
I was hoping to recoup some of the cost for micro stubs, axles, and 934s. It was an expensive project even with me doing all of the fab. Thinking it is worth quite a bit more than that. 

20210213_162843.jpg

 
not sure what its worth, but 2 or 3 seasons ago I paid $400 for all of that (except it did not come with calipers or pads).  It was Gear One (which is what I have in my buggy).  Everything was in good shape, except the Aluminum CV Flanges were junk.  I called Gear One, they had steel ones in stock, so I bought them. 

EDIT: It also came with 2 CV Bodies, but one was complete junk, the other might could be used, in an emergency. 

 
Last edited by a moderator:
Bobalos said:
not sure what its worth, but 2 or 3 seasons ago I paid $400 for all of that (except it did not come with calipers or pads).  It was Gear One (which is what I have in my buggy).  Everything was in good shape, except the Aluminum CV Flanges were junk.  I called Gear One, they had steel ones in stock, so I bought them. 
Click to expand...
Interesting. I was thinking $700 including the CVs I have laying around somewhere. Looks like $2300 for a new setup including CVs. https://www.alpermotorsports.com/index.php?l=product_detail&p=2404 Between this site crashing and my cell phone dying including memory card it looks like I lost 98% of my photos from the microstub project. Yikes. 

Screenshot_20210817-132616_Gallery.jpg

 
I would like to have all of this for spare parts,

are you in Phx?

 
You must log in or register to reply here.
Back
Top