Quick release steering wheel hub

O

Okie

Active member
May 5, 2021
107
71
Does anyone use this hub? The male spline is 1.3" in diameter. It has a spline count of 30. (I may have asked this question before) I bought it at a sprint car shop, but haven't been able to find a replacement. I have replaced the pins, but it still gets stuck. I have done the usual searches and phone calls. Any ideas who to call?

IMG_20220619_135832.jpg

 
I actually found a bunch on Amazon. The only problem was I couldn’t find out the diameter of the splines. Have you looked at Sweet?

 
ROBERT L said:
I actually found a bunch on Amazon. The only problem was I couldn’t find out the diameter of the splines. Have you looked at Sweet?
Click to expand...
Yes, I have searched all the name brands, Amazon, Ebay, etc. Shane Stewart, who I bought it from, doesn't have these anymore.

 
Dunelover said:
Speedway Motors web site
Click to expand...
All I can find in the usual places are 19 and 36 spline. And all are too small of diameter. I will build a new steering shaft, but was hoping to get by with a new hub for now.

 
Okie said:
Does anyone use this hub? The male spline is 1.3" in diameter. It has a spline count of 30. (I may have asked this question before) I bought it at a sprint car shop, but haven't been able to find a replacement. I have replaced the pins, but it still gets stuck. I have done the usual searches and phone calls. Any ideas who to call?

View attachment 35227
Click to expand...
I have one at home that was on my  old car before I changed to Sweet. I actually looked at it yesterday and said to myself that I need to sell it. It looks similar to yours, but I won't be home until Thursday to measure and count splines. My recommendation though would be for you to make the change now to one you know is quality and available both now and in the future. Where are you located? 

 
Last edited by a moderator:
Mike E said:
I think mine is Latest Rage. Similar to the one in the link, but I have a 3 hole and it looks like you'll need a 5 hole.

The one in the link is 30 spline but I can't find info on the diameter.

https://www.mooreparts.com/steering-wheel-quick-disconnect-5-bolt-wheel-to-3-4-shaft/
Click to expand...


Mike E said:
I think mine is Latest Rage. Similar to the one in the link, but I have a 3 hole and it looks like you'll need a 5 hole.

The one in the link is 30 spline but I can't find info on the diameter.

https://www.mooreparts.com/steering-wheel-quick-disconnect-5-bolt-wheel-to-3-4-shaft/
Click to expand...
Thanks for the link. I will call Latest Rage tomorrow. I could modify my wheel for any bolt pattern. I just use an aluminum sprint car steering wheel. I am near Tulsa, OK 

 
Okie said:
Thanks for the link. I will call Latest Rage tomorrow. I could modify my wheel for any bolt pattern. I just use an aluminum sprint car steering wheel. I am near Tulsa, OK 
Click to expand...
Did you find what you were looking for?

 
You must log in or register to reply here.
Back
Top