1slomofo

operational by 2028....no effing waaaaaay!

If you are looking at doing your own line of retail type canned energy drinks (no coffee) or any other type of canned soda stuff I own Design it Yourself Beverages (DIYBEVS.COM) .

We create short run beverage runs for businesses, and small brands that arn't trying to launch full scale brands like monster etc (normally you would run 200k cans of product at a time, but not with us)

27 minutes ago, Greg Rakes said:

Am I missing something. This just shows how the paddles are trimmed / hot knifed. Would love to see the process of how the actual entire tire is made. Assuming it’s similar to regular tires??

Simple... At least on the part of STU - They click the buy it now button on Alibaba and the entire shows up at their door ready for the hot knife. 

pretty lame here--- gotten about 1.4 inches in the last 24 hours. no wind at all .

So glad I watched my neighbors running around yesterday strapping down lawn furniture, buying sandbags, and spending hours in line at the grocery store from the comfort of my front porch.

6 hours ago, dbart said:

Good is BAD,

Bad is GOOD!

 

lol! YUP!

I keep justifying by telling myself.. its supposed to be happening this way...

Isaiah 5:20
Look at those people! They say good is bad and bad is good. They think light is dark and dark is light. They think sour is sweet and sweet is sour.

2 Timothy 4:3
The time will come when people will not listen to the true teaching. So people will go find more and more teachers who align with them. They will find teachers who say what they want to hear.

And no - not taking scriptures out of context... these are versus that were talking about the future (future from the perspective from when the bible was written) but now they are our times... 

Batteries! Getting cheaper and cheaper .... sounds like a good time to funnel my solar panels into my own batteries.

I bought and installed a 16' x 23' from Versatube.

its a total DIY thing.. they have pre engineered kits, or you can design your own.. they ship it in pieces to your door...

On 5/17/2023 at 5:16 AM, ChEFF said:

We hire Guido. Always get our money. Peace

 

 

LOL!!!! 

39 years old here.... 

I used to skate when I was a kid, and used to use it to commute off the train up until 29 years old. Have kids now, so I picked it back up again sorta... its tougher for sure!  Another dad friend of mine tried to show his kid an ollie, and he broke his hip (literally!!!) when the board slipped out.

I occasionally talk to Mike Mcgill (pro skater) .. hes 58 years old, and just got a knee replacement - I talked to him in the hospital/rehab and he fully expected to skate again no problem... SURE ENOUGH I see him on tony hawks Instagram crushing bowls a week or so ago . So I guess you are NEVER too old. Enjoy it. Just take it easy lol! 

Been waiting to pull the trigger on some machinery for my small biz and prices from the manufactures are still high and firm... been holding out hoping for a deal of any kind but so far still getting strong armed.

Man - I though that was my first trailer, I was looking for a scratch it put on it LOL..

Your is the same EVERYTHING as mine was... but mine was a 2006. 

for real??

Please tell me there is someone else? He is too unstable and unable to sway all the folks that need to swing... 

that story is full of all kinds of Biden math...lol!

13kw in 30 min from a 20amp plug... ya...no!

A standard tesla has a battery capacity of 50kw with the extended range teslas being around 70kw   SO...IF they did pull 13KW in 30min it would take under 2 hours from 0 battery to full for standard range and about 3 for extended.

70KW of full battery @0.13 per kw is $9.10 for full battery.

Neighbor across the street got hit 5 days ago.. took him for about 8k worth of plumbing tools (pro press etc)

My cameras  (4k) captured the whole thing, but no good to anyone when you can't read the license plate. Standard 2k, 4k HD whatever camera cannot read licenses (most of the time)

BUT another neighbor a few doors down has a dedicated purpose built license plate security cam. It's all it's good for. It logs EVERY car that goes by, categorizes them depending on how often it reads that specific plate number (neighbors, delivery trucks, etc) and it flags first time cars as "never seen before"  Its SUPER trick and I'm trying to get more info on the system.

For what its worth, we gave the cops the license plate from the neighbor with the fancy camera and they said they cant go after the guy since they don't for sure it was the registered owner that committed the crime (? What do cops actually do these days?????)

... They wouldn't give us the address of the owner of the plate either so we cant go door knocking.

42 minutes ago, L.R.S. said:

My SCE bill was $650 in July, August should be close to or over $1k. AC always set to 78°, charge my daughter's EV at work 3-4 days a week. Haven't fired up a welder in a month.

Dayam!!!

We let our circa 1994 AC unit him pretty much 24/7 sucking up 4.5kw since its an energy HOG... SCE bill was 12 bucks for August... Ever herd of solar? My loan on the solar panels is only 85 bucks a month... So im less than than 100 bucks a month .

At least until  Septempter 2024 - when the panels are paid off, and then it'll be pretty much free energy.

I always went over to the guys on Hamner ....t&t welding - to push out and press in new lugs for me.... sometimes they even already had the new lugs there. 

yikes that was insane...

Took all the safety gear OUT of the car, changed to aftermarket brakes and then drive 160mph for a test run... no helmet no nothing...

I saw that this morning - if this is the way Russia is fighting it's no wonder they are loosing.

I just built a 16 x 24 x 10 from VERSATUBE - its a total DIY thing but damned if it wasn't engineered perfectly. 

You can build the whole thing on their website. Was about 23.90/sqft delivered 

Took 3 of us a 1 week to put it together.

Was wide awake at 9:30 in Corona but didn't feel anything.... BUT our lights flickered one time right when it happened. Not quite a brown out but a quick flick... 

Kinda wierd.

My vote goes for not fake... no way Mr. proud Chris Rock would be cool with taking a hit and keeping the rep while keeping the secrete if its fake.

That being said -Will could have LAID HIM OUT if he wanted . All of his ALI training dude knows how to throw a punch.

Okay well... update on my machine as of this morning.

My issue definitely had to do with my Z axis being too far away from the bed. I was leveling the bed over an over using the leveling wheel thingy's, and getting it as close as I could but it just wasn't close enough in all areas of the bed. Even though the bed is glass it is warped etc.

With the CR touch installed it makes a map of the highs and low areas of the bed and allows you to set the Z-axis offset WAY more accurately (using the new firmware you install)

So far my adhesion is INCREDIBLE with the ZAxis being super close.  I was even using glue sticks before and still not getting a good stick like I am right now.

I went to microcenter and just bought a CR Touch auto bed level sensor thingy... Its calibrating right now. 

Well see if my situation changes at all.

I am running a Ender 3 v2 and just recently starting having adhesion issues. Not sure what printer you have but I am hearing that bed leveling is the number one cause followed by a dirty (dusty) build plate.

Let us know what rig he is running?

well said LRS Lol!!!!!