Reddragon

Wheels and rear tires SOLD. Still have the front tires 

Doing the Brakes on my oldest daughter’s Camry. Then gonna get back to mini tubbing the Plymouth. Gotta make room for the drag slicks! 

$7000

Comes with a jug of gear oil!!

They're still available.

I’d like to sell them as a set.  
I not opposed to selling the tires separate from the wheels.  
 

$1000 for the wheels 

$500 for the tires 

That sucks!! Sorry to hear that...

FYI, Antelope Valley is Palmdale/Lancaster California 

I'm in the Antelope Valley.  I'll DM for contact info.

I have a set of Douglas bead lock wheels and sand tires. Powder coated Black with gray lock rings and a set of copper painted lock rings  

Fronts - 15x5.5 3.5” backspacing with sand tires unlimited 8.50 x 15’s.  Only have about 6 trips on them, no leaks

Rears - 15x12  2” backspacing  I out a set of used dune sport 14.50’s to try out.  They have slow leak, and have some cord showing in the inside, I would replace them.  

$1500

Mendeola MD4S 2D 4 speed for sale

Rebuilt at Transaxle Engineering 

Zero miles on it, has 930 flanges

4.86 R&P 3.11, 2.17, 1.71, 1.39

$7500

Cleaned up the dirt road with the tractor. Unfortunately it was a little too dry and hard to do to much. Then worked on the tractor adding forks.  Did some honey-do’s around the house.  Tomorrow work on the sandcar.

Decided to keep it and have it tuned for pump gas. Gonna put it in a Manx project. 
 

Thanks for looking. 

Spent most of the day working on the sandrail,  cleaned up the garage and wash the wife’s car for her.  Put up more cameras on the property. See ya..

We made three trips this year, RZR worked good for all three trips no issues at all. Season is over for us but looking forward to next year. Might have the sandrail ready for next season also!  See you all out there next season!!

I ran it it on 110 race fuel @ 15-17lbs boost.  It has 2 boost settings on the controller. I believe 10lbs & 15lbs.  About 450 hp from what I was told. 

TTT

Gonna drag the road to knock down the wash board.  Go get some propane for tonight’s dinner.  Run the genny on the MH, then maybe work on the sandcar a little. 

I am selling my Turbo Subaru.  It was rebuilt by the previous owner who is a professional engine builder and came out of his sandcar.  It comes with the ECU and harness, HKS boost controller, intercooler, intercooler scoop, Outfront Motorsports exhaust and reinforced bottom oil pan.  Also comes with a Kennedy Engineered Products engine adapter. Flywheel is for a 228mm clutch. It is a closed deck block, CP pistons, and I think Carriilo rods. Comes with most everything in the pictures (I did not take a picture of the harness). I am keeping the clutch and pressure plate.  Ran good when I pulled it out to service the transmission. I am only selling because I am putting an LS in the car.  

$5500

Sold..

Trip to Kartek for some goodies,  probably hop on the tractor and clean up the backyard.  Work on the rail some, maybe….

Worked on the sandcar, dropped in some red heads to mount the tube bender in a different location and finally made some cuts with the CNC plasma table. Table worked good, just need to fine tune some settings!!

Bump

Went to the Dump, Started doing what I can on the Sandrail, probably run the tractor a bit to fix my road.

Pulled the Subie out from under the bench and cleaned it up. Took some pics of it, gonna sell it and put an LS in the sandcar.  Gonna change a few other things on it also. I’ll probably start a thread on the rebuild. Chillin with the wife, watching a little Twilight Zone!! Gonna clean and do some maintenance to the motor home tomorrow. 

New Price        $400