Sandcar / Off-Road Parts
442 topics in this forum
-
- 0 replies
- 33 views
I am looking for a 2 seat Funco Subaru only interested in a gen 4 or newer cars and Subaru only I know this is a rare find Thanks in advance!
Last reply by Jcan, -
- 14 replies
- 783 views
PBS 4-speed Sequential transmission, out of a 2-seat SU Mid engine car. Can easily be changed to rear engine. Has 2 easy trips on it since a rebuild and new R&P from Rancho. Up grading power and to an S4D. $8,000 obo Alex 714-420-4331
Last reply by Ripster, -
- 0 replies
- 40 views
Freshly rebuilt by Aeromotive with zero time on it. We purchased it as a spare from 928X but ended up going a different direction. Rebuilt because of fuel starvation due to being improperly plumbed. $1100. Located in Phoenix but I can bring it to San Diego. This is big HP/E85 stuff. You can use it for other stuff but that’s what it was designed for. Fuel injected engines: GAS up to 2400 FWHP – naturally aspirated up to 1800 FWHP – forced air induction Carbureted engines: GAS Up to 2600 FWHP – naturally aspirated Up to 2000 FWHP – forced air induction Fuel injected engines: E85 up to 1680 FWHP – naturally aspirated …
Last reply by DZRTRUN, -
- 8 replies
- 1.4k views
35.5" axle for 33 Spline 934 CVs. Has 5" of splines both ends. North Phoenix. Scott 623-229-7395.
Last reply by BoydCo, -
- 16 replies
- 453 views
I bought these hoping they would fit in my car and after try to fit them a few ways I’ve decided I don’t like them in my car. They are just a little too big for my smaller frame. I only took one pair out of the packaging for fitting. All seats are new never used. $900 for all 4
Last reply by Doonit, -
- 1 reply
- 118 views
Toggle Members Info Posted March 12 I have 4 complete GearOne 934 CVs with 300m cage. 33 spline. They are in good used condition and show normal wear. $225 each plus shipping. They weight almost 10 pounds each boxed up for shipping. Located in Phoenix. Scott 623-229-7395 Gear One Super 934 CV: featuring the cutting-edge Gear One Super Cage. Engineered to redefine precision and durability, this CV joint stands as a testament to Gear One's unwavering commi…
Last reply by L.R.S., -
- 1 follower
- 0 replies
- 108 views
Full set of 15" DTW wheels with STU paddles and OMF rings for sale. Rears are 15" with 3.5" offset, cut down to 10" wide by OMF. Rear paddles is a 33 blaster No. 2. I believe front is 15" x 5 1/2", 3 1/2" offset. Front paddle is 10.75 STU. Wheels are powder coated black. Paddles are in great shape. I believe the date code is 2021. No chunks missing, no patches. $3.5k
Last reply by Reece Pettersen, -
- 1 reply
- 139 views
5” Autometer part # 3911 Tach and part # 4485 electric clock. Both for $275.
Last reply by FOG, -
- 1 reply
- 282 views
Mendeola 2D with 930 flanges set up for a stock LS comes with and LS flywheel and stage 3 Kennedy clutch and pressure plate Comes with a set of axles and 930 cv's (not sure the length) also comes with a near new Pro am shifter (over $400 new) Trans was built by Wright gear box and only has a few trips They went to a bigger trans and more power. Shifts good and in working order. Asking $7500 for everything. Firm on the price located in San Marcos 92069 Buggy, sandrail , longtravel, baja , manx, glamis, ect call (760)802-6040
Last reply by MGMFRP, -
- 2 replies
- 99 views
Hello, I looking for a pair of 10” 2.0 Fox Piggyback bypass shocks. I’m looking to add bypass shocks to the front on my sand rail. i have the old blue anodized color, I prefer to match if I can. Please let me know what you have. I’m located in Rancho Cucamunga CA. Thanks! Dave
Last reply by Davcam24, -
- 0 replies
- 179 views
Fresh Mendeola S4 for sale. Complete rebuild/update from AZ Transaxle with zero miles on transmission. Look at pictures for list of new/updated parts. 934 CV flanges R&P - 4.86 1st - 2.91 2nd - 1.93 3rd - 1.50 4th - 1.26 $12,300 OBO (520) 437-8878
Last reply by BVest41, -
- 1 follower
- 1 reply
- 138 views
Before ya get to excited these are not A4 heads the have the smaller porting, but could be a great back up to finish a season. Pick up in Glendora only or GD Postal
Last reply by Poule43, -
- 1 reply
- 178 views
15-50 break in oil. $10 a gallon rs 10-30 $20 a gallon shoot me a message if interested
Last reply by Camacho, -
- 0 replies
- 80 views
Complete MEFI 4 computer and wiring harness. Harness includes injector sub-harnesses, fuse blocks, relays, and ignition/accessory switches. Harness was labeled during removal as well. Currently tuned for an LS1/6 5.7 with a mild cam. $1000 obo call or text Chris at 951-834-2622
Last reply by JPS_Motorsports, -
- 2 replies
- 311 views
Hi All, Thanks for taking time to read this. I bent one of my Douglas 17x14 5x5.5 for Buckshot on Presidents day...looking to buy a set of Buckshot wheels to use and keeps as spares. I could also use a 17" Wide 5 if it has wallowed out holes or similar damage because I can have OMF cut off the outer beadlock flange and weld it in place of my damaged one...throw the wide 5 star away Will be doing some work on my car over the summer as well if anyone has any Buckshot specific parts they are looking to unload. Thanks, Email = wildernesselect02@gmail.com Text = 602 903-0529 or message here, will pop in from time to time
Last reply by Jajl22, -
- 2 replies
- 234 views
Aeromotive a750 fuel pump. Freshly rebuilt by aeromotive, still in the box with rebuild receipt. Good for up to 800 horsepower. No longer need. $400 obo Located in Surprise, AZ
Last reply by JPS_Motorsports, -
- 0 replies
- 177 views
Upgraded my sand rail so have these parts to get rid of. Mefi came out of running twin turbo LS3 car tuned for pump gas. Custom harness with bulkhead disconnect making it easy to pull motor without having to un wire. Harness also comes with bussman relay and fuse box setup for fans and fuel pump. $700 Livorsi gauges- water temp, oil temp, boost and oil pressure. All gauges are complete and working $225 Remark gear indicator, wires are cut but can easily be spliced back together. Does not come with the trans potentiometer. $150 Im in Nor Cal so shipping on buyers dime but should be cheap with flat rate boxes
Last reply by HydroPower, -
- 4 replies
- 326 views
Looking for a pair of Douglas Beadlock Wheels 15” with 3.5” backspace and 12” wide. No egg shaped lug holes.
Last reply by FOG, -
- 3 replies
- 601 views
Set of 2.5” 3 tube bypass. 14”. $1400 for the set. Ship on your dime. I will be in Glamis next week and every 2 weeks after that. 480-231-6386
Last reply by lincster, -
- 0 replies
- 133 views
Brand new DWT 15" X 5.5" wheels with OMF beadlock conversion, 3.5" backspacing. Located in La Crescenta, CA but we get to Vegas and Phoenix weekly. Or I can meet up in Lake Havasu this Fri to Mon. $1000 Jeff 818-472-9179 call/text
Last reply by L.R.S., -
- 2 replies
- 213 views
Both wheels have a flat spot (prior owner) , one is more noticeable than the other. I couldn’t feel any thumpity thumpity but you can see it plain as day watching the wheels go around. I’d consider these spares. The two 6.80-15 tires age is unknown but have cracks, most likely old. One held air the other lost air over a couple days. The wheels have “sand limo” engraved on the beadlock rings. Do have the bearings , lock nut, and caps. Converted to 2” hollows and 8.5-15. I will be at St Anthony IDRV May 21-24th, if you would like any of these let me know and I’ll bring them. If you can arrange for a ride from St Anthony to your location let me know I’m sure we can make som…
Last reply by EastMT, -
- 1 reply
- 242 views
Freshly rebuilt by IMI (had to cut the tape sealing the box to take pictures, still has receipt). For a Honda motor mated to a VW-style bell housing and adapter plate. $275 obo Located in Surprise, AZ Call or text Chris at 951-834-2622
Last reply by JPS_Motorsports, -
- 3 replies
- 178 views
I was givin a runnin 2000 outback. Lookin 4 used parts 2 make it run. Exhaust-adapter-computer ect... let me know what u got. Brian 661-619-1622
Last reply by lardass, -
- 5 replies
- 313 views
I have a few brand new still in the package folding billet whip mounts. Get them before the season starts. $20 each or 2 for $35.
Last reply by FOG, -
- 1 reply
- 151 views
FREE Radiator has a crack in it. Took it to Kirk's Radiator and was told the crack is in an easy place for an epoxy repair ($265.00). They said it could last 2 weeks to 2 years ? Pick up in San Diego.
Last reply by Looney Duner,