Morgan

Doing a little garage cleanout while the weather is still nice. Signal Butte and Ray in east Mesa is where everything is located. Might be heading to Long Beach 5/2 and can bring something if need be. 

Motorsport ATV X-stand, new never used- 120

2018 F-150 4x4 suspension lot with spare tire- 120

2018 F-150 4x4 driveshaft- 50

2019 Ram 2500 4x4 suspension lot, less than 2K miles before being pulled off- 400

'14+ Dodge 2500 Timbren SES, new never used- 240

'15+ Mustang S550 trunk lid, Oxford white, perfect shape- 300

Silverado center console lid, off of a 2015- 25

'14+ Ram 2500 Carli front sway bar drops, less than 100 miles on them- 100

'06 Silverado cat eye parts lot, pillar trim, 3rd brake light, couple new steering wheel controls- 25

Mustang S550 Kell Trac Subframe Posi Loc kit, new never used- 175

58 minutes ago, Hondajimz said:

How about Rob Stringer@Arizona Collision Center in Tempe. He's a Glamis guy.

Rob painted the STX grill that I have for it, and it was $350 for just the outside shell. I'm afraid to even ask what he would charge for this job, I'm guessing north of 3K which I'm not looking to spend over about 2K on it if possible. Other than a few dirt nibs it was nice work. 

Looking to get my little F-150 daily paint matched, anyone have a recommendation for a good paint guy in the Phoenix metro area? Had one guy lined up that was fairly highly recommended but he just does it on the side now and we can't seem to get our schedules lined up. 

Bumpers

Mirror caps

All 3 handles

2019 Polaris RZR Turbo S 1040 miles (8 Day Trips To Glamis, Never Been Used In The Dirt/Desert)-

Cage WRX Super Shorty Cage, TIG Welded, Indy Red 
Cage WRX Roof, Satin Black, Marine Decking Lined 
Cognito Doors, Wrapped Silver, Marine Decking Lined 
Cognito Tie Rod Kit 
Cognito Rear Sway Bar Links 
Cognito Radius Rod Box Plate 
UTV Inc Suede 13" Steering Wheel 
UTV Inc Quick Release 
UTV Inc Billet Mirror 
UTV Inc Grill (Custom PC, Stainless Bolts) 
PRP GT/S.E. Seats 
PRP 5.3 Belts 
L&W Fab 2" Lowering Seat Bases 
DynoJet Powervision 3/OHV Headquarters Mount
DynoJet Wideband A/F
DynoJet Launch Control (2-Step)
TurboSmart Boost Gauge
Whalen Speed L6 E85 Big Turbo/Big Injector Tune
Aftermarket Assassins L4 98 Oct, L5 110 Oct, L6 E85 Tunes
Aftermarket Assassins Water Cooled Billet Turbo
Aftermarket Assassins Billet Wastegate 
Aftermarket Assassins Big Turbo Clutch Kit/Helix
ZRP Billet Primary Clutch Hat
Injector Dynamics 1300cc Injectors
ARP Head Studs
TPR Valve Cover Breather
TPR Manual Cam Chain Tensioner 
RPM Charge Tubes
RPM Blow Off Valve
S&B Air Filter/OEM Spare
Modern Race Products Built Transmission 
Modern Race Products 3" Exhaust
Modern Race Products Billet Lower Shock Collars
Modern Race Products Passenger Grab Bar
Modern Race Products Catch Can, Earl's AN Lines/ Billet Clamps
Rogue 34" Smooth Buffs, Rogue 34" 16 Paddle Rears, All 4 Bead To Bead Buff (New) 
Hostile Boost 15x7 Front, 15x10 Rear Wheels
Sandcraft Ultimate Belt Bag With Tools
XS D1200 Battery (New)
Dune Gear Plastic Bolt Kit
Element E50, Shred 3D Mount
Polaris Fang Lights/Center Brake Light
Polaris Rear Red Facia/Red Turbo S Hood
Misc. Indy Red/Satin Black Powdercoat Throughout
New GBoost WBB Spare Belt (Never Blown A Belt, New Belt Each Trip)
Mobil 1 Synthetics Engine/Trans (Changed Each Trip)
Valdo's Ceramic Coated
Desert Tires, New Cover Included

$30K. Legit turn-key setup that is shop owner owned/maintained, has been garage kept since day one, clean AZ title in hand, zero issues whatsoever, no leaks, drips, drops and is clean enough to eat off of. Built as a no frills dune car, will wheelie with ease and runs low 90s at the drags. Only selling cause I don't enjoy the dunes as much after I lost my Grandpa so the car just sits. Not interested in any trades.

As far as the amount of trash left behind, in my humble opinion as a 39 year duner on this is that when a big conglomeration like Polaris comes in and advertises it as and then throws it as a party, then a fair amount of this is on them. You have to remember that typically the guests don't clean up the party, and that mentality was shown this weekend. In all reality, they are the ones making themselves look like dumbasses to the 20+ year duners because of the negative things it brings to the dunes, seen lots of people say they'll never go back, not a great look for Polaris overall. 

Does anyone know someone that is consistently doing Reno to the Phoenix metro area?

Need a quad brought back possibly. It's a 250, so less than a few hundred pounds. 

Stacey Jordon 602-397-3780.

Added another one to the fleet. Slow but still a fun car...

2 minutes ago, Fullthrottleguy said:

Nice Opinion  LOL  Let me AFTER you try them all - 

Like you said, "LOL", all the record cars are twin turbo or Whipple cars. 🤷‍♂️🤷‍♂️ 

On 12/15/2021 at 6:00 PM, Fullthrottleguy said:

Resistance is Futile ... but if you must...  go Kenne Bell you will be happier anyway   

KB isn't even in the ball park on Gen 3 Coyote stuff. Whipple is King Daddy followed by VMP, and then Edelbrock. 

I can't be the only one who has a street car/fun daily so let's see them GD fam.

My 2018 Mustang GT Hellion TT car...

5 hours ago, Kraut_n_Rice said:

FWIW... IF you F it up, Ford can look your As Built by VIN, and reflash back to stock it.

I've thought about just bringing it over to the dealer to start from square one. With it being a TT car, I'd have to take it over there, park it, flash it back to stock to do the scan work and then flash the tune back in it to be able to start and check things over. I don't really see them being all that hip to me telling the tech what to do and not do so they don't flash over my tune and brick the ECM. Thanks for the input, Gramps.

3 hours ago, Kraut_n_Rice said:

I dabbled in it a while back for work.  Most of the stuff I found on various forums was for trucks.  Fine for me, we only use F550s.  The way it's coded, you almost have to have two of the same vehicle to scan through to see what's different.  AND, know what line of code to look for.  PITA

It's a pain for sure. I bought some "files" from a guy that does the digital dash conversions and FORScan doesn't even see the SCCM so I can't even save the As Built data to be able to upload these files into the SCCM. As soon as I told him about my issue, he stopped replying. Go figure. 

Anyone on this site happen to be a FORScan wizard? Trying to sort out an issue with the digital dash on my Mustang, and no one local seems to be able to figure it out. Long story short, FORScan doesn't see the SCCM so a few of the steering wheel buttons don't work as they should. Will pay in cash, beer, or both. 

Complete sand tire set sold. Bump. 

Moving warehouses and would like to clean up some old ATV tires. Pickup only, will not meet. Cooper/Guadalupe in Gilbert, AZ. 

Yamaha ATV sand tire set- 100

Yamaha ATV dirt tire set- 100

AMS Whipsnake 22x8x10 front dune tires, new- Have 2 sets, 50 a set 

AMS Blacktail 21x7x10 front dune tires, new- 50

AMS Diamondtrak 21x7x10 front dune tire- 25, only have 1

AMS Whipsnake 21x7x10 front dune tire- 25, only have 1

Text is the easiest, 520-405-0335. 

They weren't going to let Trump win. They weren't going to let Elder win. 

It's worth 150K on Str8Up. 

10 hours ago, Kraut_n_Rice said:

 

He probably didn't even reply.

I imagine he wouldn't have. Not really a "make offer" market these days.