KLC

I have a pair of Eibach 10" x 2.5" x 150lb springs for a 2" coil over. A 2" coil over uses a 2.5" spring.

I used these for a single trip and had to respring. They're even in the boxes. $130 and I'll get them shipped to you. Where are you located? I'm in Phoenix.

When did this happen? In 1985? That engine hasn't had oil in it or a pan on it in years. The oil filter boss and engine mount bolt holes are rusty. Seems fishy to me sir.

Just buy this instead, it's half the price and twice the fun. 

 You should ditch that LS and install a big inch rat with a littlefield and zoomies. 

That would be embarrassing to be seen in.

Make me a reasonable offer, someone has to need some shocks.

I have a 220 watt electric steering unit that came out of my 4 seat buggy for sale. It has worked great with zero issues. The car it came off of had 10.75 front sand tires and it steered them with ease. It is the assist motor, control unit and wire harness. Originally purchased from Pacific Customs for $625, I likely still have the receipt if I looked for it. I'm in Goodyear, Az. I'm asking $300

These came out of my buggy. The front covers are worn but the rears are decent. I have 1 brand new oem seat cover I will include, it just needs to be installed. I believe EMPI still sells the covers. I also have a set of 4 Crow harnesses, they are the padded 4" with single upper attachment behind the seat, anti-submarine crotch buckles also. Harnesses are in great shape, no freying or tears. I will not sell individually, as a set only. I am in Goodyear, Az. $400

Sales tax in Glendale Az is 10%

The fuel jug ban is coming too. 

Said someone 10 years ago.

Damn the new trucks are stupid expensive.  My Ford dealer keeps sending me offers to buy my truck back for what I paid for it 4 years ago, that's fine and all but it would cost me another 20k to get another one, no thanks. I'm going to throw another coat of wax on my 2019 super duty and keep it another 8 or 10 years  LOL.

After all of that dog and pony show bull sheet he bolted on, it's still just a SxS. 

I've nothing to add except a gripe about permits. Why does it take so damned long for a permit?? Seems like it could get done in a few days but often times takes weeks/months. 

The 2 avenues always seem to be do it now it's not getting any cheaper, and just wait it out things will come down soon enough. I don't think there's any one good answer anyways. IMO the answer you get depends on if you sign the front of a check, or the back. Personally, and I sign the back of my check, I'm going to wait for any huge purchase. 

We want to build a house on some property we bought a year ago, that would also include drilling a well. We haven't done anything to get the ball rolling yet with the hope that material prices will become more affordable as whatever it is were in right now evolves. "They" say housing is slowing down but there are still what seems like a million new homes under construction around these parts, so the truth is housing hasn't slowed down at all, the price of existing single family homes may have slid down a bit but construction is still going strong. That in itself is enough to keep materials and labor healthy.

I used to think I made good money at my job but when I see how much less I can buy here lately it makes me want to quit and learn a new trade, I "have" been wanting to open up a tropical fish store...

I need to get mine done, thanks for the recommendations.

11 hours ago, L.R.S. said:

I have a 5 month old Universal Trailers 20' enclosed I'll sell.  Pink in my business name, CA PTI plates were around $150.  Rear door is 104", side door is 30".  Dual 7000lb 8 lug axles, 12v interior lights, single roof vent, electric tongue jack, 5k Badlands winch and a battery on the floor, no water, no fuel, no 120v lights.  This trailer was designed and built for my transpot business to be light and easy to load.  It's been a geat trailer but I have a new design in mind and can't pull the trigger unless I sell this one.  It went straight from Universal to Royalty Coatings to have a sealer and epoxy floor done.  We've put around 5k miles on it so far.  

Also, every sandrail we've hauled so far the front end fits between the fenders.

$20K.  It's not advertised anywhere, not desperate to sell, it gets used weekly, especially with all the rain we've had in CA the lately.

Jeff 818-472-9179 call or text

 

 

 

 

 

 

 

 

This dunebuggy.com Sidewinder with a Chevy Avalanche body is the largest offroad car we've had inside.  It cleared by a couple inches on both sides.

 

 

 

 

 

Man that's nice!

I have a pair of Fox 14" coilover shocks, these are 2" emulsion shocks, 7/8 shaft with no reservoir. The springs are Eibach 350 over 450. These were purchased new in 2014 and have been installed on my V8 sand car since I bought them. They DO NOT leak and are presently filled with Fox oil and charged with nitrogen. The heims are tight and in good shape. 1 of the bodies has more threads than the other but it's never been an issue, I received them that way and never pursued exchanging them. They were just taken out of service in the last month and there is no reason they couldn't be put on a car and used right now. The valving is within a range or two of stock but they've definitely been revalved a few times in the past. 

I'd like to sell them as a set, and I'm in the Phoenix area. Brand new from Kartek is $1134 if they even have them. I'm asking $800 for the set. I'd rather not ship if I don't have to as it may be cost prohibitive to do so in the current shipping market, however all inquiries welcome.

Keith 951-522-4807 (yes that's a Riverside # but I'm in Phoenix)

I hate OfferUp, too many losers who will waste your time with multiple messages and "Is it still available?" or "What's your address?" and never show up. FB Marketplace has been the goto for selling stuff lately. I don't do FB myself so I enlist my spouse to do all of the listing and negotiating. Funny thing is I end up not seeing any of the money LOL.

Very cool, thanks for bringing it back to the surface. 
 

The wife and I hiked the Granite Mountain Hotshot Memorial trail yesterday as a matter of fact. We’re only about a 90 minute drive from Yarnell. The start of the journey wasn’t too bad with just small patches of snow here and there, but the north side of the mountain had a foot of snow on the ground which turned the trail into mud.  According to the altitude app on my phone the lookout point from which you can see the fatality area is 6400’ and was a tough hike on the slushy trail. Anyways, the state of Arizona did a great job creating the memorial for all of the hikers who wish to pay their respects to the 19 lives lost in 2013 while trying to protect the town of Yarnell. 
 

Fwiw, it was a tough hike on a maintained trail, just think what the Hotshots have to carry in to battle a fire without any trails to follow. Those guys are true heros. 

Redback Easy Escape 

Like Cookie says, I don't eat enough eggs to care about what they cost. Don't get me wrong I love eggs, I just don't eat them very often at all. 

The rest of my group is upgrading to digital equipment so I'm just seeing if there is any interest in my Rugged RM60 car to car unit. It's a white model and I've had it for 4 years now. I have no issues with it. This is just the radio by itself, no intercom, no headsets. 

I'm asking $200

951-522-4807, yes IE number but I'm in Phoenix

I've had good luck with GKN CV bodies with Fortin 300M cages and stars, I run them in a 2500lb car with LS3 and 33" Blasters.