Johnny

Great pictures , Thanks 

16 hours ago, endobear said:

?

I have it stored in my GPS, And my car is in glamis,  I will be bringing my stuff home this weekend and I will send it to you.

14 hours ago, endobear said:

Ran down there at sunset.  Rained a little on the way there. Was fun blasting back in the dark.

Messed up that some asses burned all the trees. No neckedness to be seen. Thank god.

Love that spot, There is also a Huge one just west of Gecko road.

Killer deal

ADP as well for me and I have never had a issue, Another good thing about them is if you don't use direct deposit they will hand deliver your checks. Not sure if they still offer that.

11 hours ago, Rockwood said:

Just for reference:

8:51 of this video, ogling a nice prerunner. “Like, comment, subscribe, lemme get a new ride!”

These guys just love Glamis, nothing wrong with trying to turn it into something profitable.

Well I catch myself doing this all the time When I see a nice Tatum or a Buck car , A lot of People that post videos online ask to like & subscribe , There is nothing wrong with that. A couple kids putting out content and dreaming . I suggest  you to stop being a hatter and stop watching there videos . Hating on these guys for putting out a video for picking up trash after a big weekend . LOL

7 minutes ago, Rockwood said:

Watched those guys for a bit. All he wants is for you to like/comment/subscribe so he can buy a long travel…

That's a shitty thing to say, And how do you know ! they just don't like a clean desert .

I have now tried over the years ,About 6-7 different ones and I must say Tracki is the best one out there, I have never found a tracking system without a monthly fee period, That works. They average is about 150.00 annually. for most trackers. Tracki for me is the best because it is small and easy to hide, Battery life can last a month depending how often you set it up to ping your phone. It can also be hard wired into any vehicle .  

Happy Birthday Scott 

Love these tires, I prefer these over any BFG .

Love my 2014 toyota FJ , They are probably one of most dangerous car on the road because of the blind spots, A few tricks, I installed a sensor kit for less then 200 bucks like all the new cars have and lets you know if you have a car next to you when switching lanes. Toyotas are bullet proof , As you know because they stopped making them 2014 the prices went through the roof. Subaru is coming out with a new mini truck

On 2/22/2023 at 2:00 PM, Crusty said:

Make a run to Vegas..

https://lasvegas.craigslist.org/tro/d/las-vegas-super-tough-32-ft-weekend/7590218381.html

Some pics are wrong model, could be the guy is a numbnut or a Nigerian Prince.....worth a call

Examples cause the Ad pics suck.

That is the same exact trailer I have and I really like it, Have never had any issues with it ,That model is a 3105 .Tows like a dream. If you are in San Diego you are welcome to come by and check it out. That is a heck of a good price.

Great Video , The legends for sure  

1 hour ago, Smokeat said:

Just curious if anyone on here used Starlink on Halloween weekend in Glamis? There must have been a lot of Starlink users out then, and I was wondering how it worked (such as down/up speeds) during the busiest weekends now that a lot of RV's have Starlink. I have been thinking about getting it for internet & streaming sports while camping, and have been reading that some RV'ers feel that they are getting slow speeds now, as Starlink gets more popular.

 

So if anyone has any experiences they wish to share, I would appreciate it. Thanks

Great question, One of the guys in our group has one and a few of us were streaming off of his signal , although it was the weekend before the heard 

Be careful My brother in law seen that on facebook and he got scammed, If it is real post it up, That sounds like a good deal.

I like many others have tasted some great Tequila, I also like  Don Julio 1942 ,But for me "Arrecife Plata " is my favorite, I can not find it in the states .

Now that is what you call a Team Player , Sausage 450r I give you Mega props.

Thank's , I will try this configuration and see if it works.

            Johnny

I added 2 new 60 gallon each ,fresh water tanks a few years back and didn't take a picture of the wire colors and I believe I have couple wires mixed . If anyone has this same set up and don't mind taking a picture of the correct wiring sequence or just giving me the correct colors starting from the bottom or top I would be so thankful. Only one tank on mine has sensors.

     Thanks

Johnny

Samsung makes one that is called (SmartThings tracker) I think they are around 80 bucks, They are real small about the size of a silver dollar, No monthly fee. I throw it into my long range RC plane and they work great, Lost a plane one time and was able to recover it, You can also wire in a voltage step down and wire it directly to anything 12 volt. Can be hidden very easy , without being hard wired I believe it will last a few days.

2 hours ago, BrapBraap said:

$16.5k for 6kw of Panasonic panels in San Diego from a reputable business.

pay for it outright, get the 26% tax credit. Break even in under 3.5yrs

goes up in a few weeks.

Could you give me the name of the company that has this deal. Do they have any other discounts if you have a license ?. I am currently shopping for a system and perhaps if I mention your name they could give you a deal on something you may purchase in the future for a recommendation. Probably a hat or a shirt , No one gives anything good anymore for a  recommendation . As someone mentioned above, Is that a Battery bank would be nice and I understand that these batteries are getting cheaper. 

36 minutes ago, Esco said:

I would love to see more pictures of this car

Wow I just don't know what to suggest, When I get stumped I will usually go to the Prusa forum , In his case I would try the Ender forum , These Forums are so helpful. Perhaps someone will chime in. For myself I am somewhat a newbie , I have only been into 3d printing for 2 years.Don't give up there is always a solution .

I have a prusa that has a heated bed and I never seem to have that issue, But I have a friend that uses elmer glue sticks before every print. Just rub the glue on the build plate and it will hold the print in place. Another reason could be that his Z axis is to high. He needs to do a full calibration if he hasn't already.

I have a friend that burns canola oil in his and it burns clean, And if you buy it in bulk It is cheaper then buying firewood in a plastic wrap at the grocery store .I know a few friends that buy firewood at the grocery store .